It will be useful for any owner to know how to disassemble the handle on the door, especially the interior. This hardware is subjected to a serious test by all residents, so someday it will fail, and it will need to be replaced by another. In this case, you do not need to call specialists, you can handle it yourself, while saving on employee wages. Moreover, this business does not require great skill, but only a few skills. The dismantling process may vary depending on the type of handle, but the whole process should not cause particular difficulties.
How to remove the handle from the interior door? Before proceeding with the analysis of the mechanism, you need to find out what kind of classification it refers to. The division occurs according to several criteria. Described below is suitable for parsing the handle, because it has a classification according to design features.
Varieties of pens
Push. Such a handle is attached on both sides of the door leaf and has an L-shaped shape. Opening occurs due to the load on the handle, after which the tongue is set in motion. The disadvantage of this hardware is that it is very traumatic.
Swivel. The opening method is the same as that of the push, only the tongue is set in motion not by pressing the handle, but by turning it. Such models are often not very convenient, because to scroll it, you need to have your hands dry, otherwise they will slip. When replacing them, a legitimate question arises about how to unscrew the handle of the interior door.
Stationary. Such a handle does not have a latch. It is attached with screws directly to the door leaf. It happens single or double-sided, with an axial connecting element.
Reasons to disassemble the pen
It is not so difficult to disassemble any model of door handles, because they have a similar design.
At the same time, it is extremely rare to analyze this hardware. What reasons can lead to this? How to remove the handle from the interior door?
The first reason is a breakdown. It is found most often. Often, Chinese inexpensive models that are not designed for constant and rough load are prone to breakdowns. If the prophylaxis of some elements is not observed, then the fittings become unusable. It should be repaired, and sometimes completely replace the element as a whole.
The next reason is the need for replacement. Every year, the market is replenished with new and improved models. In this case, you can choose a color scheme suitable for the interior, or put a new, more functional and reliable model.
Repairing a room often involves a change of style. At the same time, door handles are not ignored. Therefore, the question often arises of how to disassemble the door handle.
Another reason is spoiled appearance. If the part is made of low-quality material, then scuffs and scratches will very soon be visible on it, which negatively affects the entire interior.
Remove the push handle
How to remove the handle from a push-type interior door? This mechanism is more difficult to disassemble, because in its design there is an axis shaft, due to which the handle is held. It is tightened by a tetrahedron.
The process of disassembling the handle should begin with the removal of stubs around it. They are fastened with screws or tightly pressed. They are very easily removed with a minus screwdriver.
Next, you need a tetrahedron, which will reduce the strength of the rod.
On one side of the door you need to unscrew the hardware and remove it. Then the second part is removed, on which the axis shaft remains.
If the handle with the lock for interior doors, then it is also removed.
Following the sequence and accuracy will allow you to remove the mechanism without problems, without damaging the parts and without creating unnecessary trouble.
How to remove the handle from the interior door turning with a socket?
When there is no hole in the side of the swivel type accessories, into which you can insert a key or a screwdriver, the elements are disconnected manually. Both parts of the handle should be scrolled in different directions and gradually removed from the thread. On one of them will be an axial rod.
Similarly, the socket is removed and the screws are unscrewed. When the axis is removed, you can do the following elements - a latch or a lock, if there is such a need. When the decorative parts are removed, you need to monitor the use of your force, because overdoing it, you can damage the elements.
Remove the rotary knob
The handle with a lock for interior doors of a rotary type is removed as follows.
This will require a key to clamp the spring mechanism. Often it is not included in the package with the product, but it can easily be replaced with a nail or other delicate object.
First of all, you need to remove the decorative plates, which you can simply pry off with a sharp object.
Use a wrench or a nail to push the spring-loaded pin by inserting the tool into the technological hole located on the side. At the same time, pull the handle and remove it with the cap.
Next, the decorative flange is removed. To do this, a latch pry.
Then you need to push back the mounting screws located on the plate. Then the two parts of the handle can be removed together with the axis.
It will not be difficult to assemble the round door handles back, only all actions must be done in the reverse order. First, a lock is installed, which is fixed by the plate, then an axis is inserted, fasteners are put on it. Decorative inserts are mounted last. The main thing is not to forget that the decorative flange is threaded first, and only then the main part of the handle is fastened.
We remove the stationary handle
How to disassemble the door handle of a stationary type? They are least likely to break or deform. This is due to the absence of moving elements in it. Often, door handles of this type, after removal, are not repaired, but replaced entirely. The removal process is as follows:
- Screwdrivers unscrew the screws.
- One part is unscrewed from the rod, and the second is removed with it.
This design may not have a central shaft, which greatly reduces the process. It will only be necessary to choose the right screwdriver to unscrew the screws of a certain diameter.
We remove the handle with a latch
First of all, when the handle-latch for interior doors with an automatic lock is removed, it is necessary to remove the screws with a screwdriver. Next, unfasten the overhead elements. Unscrew the rod with a wrench .
After that, pull out the swivel mechanism wrapped in a spring.
Popular way
There are several ways in which the latch-handle for round-shaped interior doors with a lock is removed. Here are the most popular ones.
The decorative pads must be removed with a screwdriver, first from the part where the latch device is located. It is necessary to press on the open stopper and at the same time pull the handle towards you.
Next, two screws are unscrewed, after which the parts of the latch handle are removed.
Then the latch is pulled out, for which the screws are unscrewed, after which the latch is released.
Thus, to disassemble any door handle with your own hands is not a big difficulty.