In 2004, Intel developed socket 775. Over the next seven years , motherboard companies released such motherboards with this software interface. But in 2011, the 1055 socket appeared, followed by 1056. It seemed that they would completely push motherboards with an outdated 775 socket out of the market. But this did not happen, to this day, many people use this particular model. How did the motherboard 775 DDR3 socket retain its popularity?
What were the disadvantages of a motherboard with a socket of 775 first releases?
The main drawback of this development was the rather low frequency of the system bus, with a fairly fast processor, the system bus was just that narrow neck that slowed down the overall system performance. These first motherboards were clocked at 533 MHz and with DDR2 memory. But such a system had many advantages over the previous socket 478 and contemporaries of this socket from AMD. What are these benefits?
For the first time, Intel is introducing a new type of contactor between the motherboard and the processor. She abandoned the usual pin connector, which was used in AMD's previously developed sockets. In place of these pins on the processor came high-quality conductive pads that pressed against sharp contacts on the motherboard. This allowed us to increase the reliability of the processor itself and the reliability of its contacts with the motherboard. To solve the problem with a narrow neck of the system bus, motherboards 775 socket, DDR3 memory appear . An example of such motherboards is the Gigabyte family with the G41 chipset, photos of which are shown below.
Features of the processor architecture on the 775 socket
Between Intel and AMD are constantly fighting for leadership in the production of processors for computers. In addition, each manufacturer has its own developments that give an advantage to motherboards and processors. For example, Intel refused to place a RAM controller inside the processor, moving it to the motherboard. At the same time, AMD used such a controller directly in the processor. When working with DDR2 memory, this gave certain advantages to motherboards with an AMD processor, since the use of RAM in such boards was more efficient.
But the motherboard 775 DDR3 socket is born , and everything changes dramatically. Since there is no memory controller in the processor, it becomes possible to use a higher bus frequency without changing anything in the processor architecture, and the narrow throat instantly disappears.
New motherboards under 775 socket with DDR3
The maximum bus frequency reached 1600 MHz. But in the beginning there are transitional models that can work with DDR2 and DDR3 memory slats. Two banks with DDR2 and DDR3 were installed on the motherboard. But at the same time both memory could not work, it was possible to choose one or the other. Accordingly, the maximum amount of memory was reduced almost twice.
Subsequently, the motherboard 775 DDR3 socket was developed , which already had four banks of new memory. This, of course, gave the user certain advantages. Firstly, this memory was cheaper, although it was twice as fast. Secondly, the motherboard 775 DDR3 socket, 32gb had the maximum amount that could be installed on one motherboard. And with this amount of memory, bus frequency and a top processor, it will always be possible to solve any office tasks without losing speed. And if you need to solve graphical problems, then with these parameters it’s enough to put a powerful video card and you don’t want to incur additional costs for switching to a new socket.
Motherboard 775 socket DDR3 - past or present?
In the current economic crisis, many computer users are very cautious about the proposal to upgrade their device. Currently, the top-used 775 DDR3 socket motherboard is more expensive than the new mid-range motherboard with a modern socket.
Therefore, if you use all the features of RAM, you can significantly save money and wait with the modernization of the computer.