To date, electric scooters are quite in demand. There are many models for children on the market. However, for adults, manufacturers are also willing to offer devices. By design, they are quite different. It should also be borne in mind that you can assemble an electric scooter on your own. However, in order to better understand this issue, it is necessary to study the main manufacturers of devices, as well as find out the parameters of the most interesting models.
Energy Scooters
The wheels in electric scooters of this company are used mainly direct. Engines are most often installed with a maximum power of 5 kW. All this allows the maximum speed to gain up to 10 km per hour. It should also be noted separately that starters are used manual type. Directly set different frames. As a rule, they are not wide and weigh extremely little. Brakes are most often used drive type. The average power reserve of the models does not exceed 30 minutes. A good scooter of the specified company will cost around 32 thousand rubles.
Energy 41A Model (Electric Scooter): Overview, Features
This scooter with the maximum power is capable of boasting at the level of 5 kW. The maximum speed of the presented instance is 12 km per hour. It should also be noted that the steering wheel is of a direct type. It is possible to adjust it in height with a wrench. The base for this electric scooter is quite wide. At the same time, the stand is made of a special aluminum alloy. In addition, it should be noted that the rotor box in this model is reliably protected. In this case, the brake system is provided by the manufacturer for the drive type. It costs today the electric scooter in the region of 31 thousand rubles.
New Energy 36V Model
Many buyers prefer this model because of its compactness. The stand in this case is completely made of aluminum. At the same time, the manufacturer has provided a plastic overlay for it. The accelerometer in this case uses a rotary type. In this case, the starter has a foot. In addition, it should be noted that the wheels are included in the standard set with urethane gasket.
The rotor box in this case is quite durable. The footboard manufacturer uses a welded type. The maximum speed represented by an electric scooter on an asphalt road is capable of gaining 10 km per hour. On the market, sellers ask about 27 thousand rubles for it.
Motorboard 2000XR Review
The Motorboard 2000XR (scooter with electric motor) is very interesting in design for many users. The stand in this case is provided with a circular cross section. At the same time, the base is included in the standard kit exactly 2.2 mm thick. She can withstand loads quite large. The electric motor in the presented instance is installed in a protective box. Its maximum power is 5 kW. All this makes it possible to gain a top speed of 12 km per hour.
The gearbox in this case is enclosed in a special casing. Thus, it is completely protected from mechanical damage. The brake system is provided by the manufacturer for the drive type. In this case, the gearbox is used axial. In this case, the coupling should be mentioned separately. If you believe the feedback from consumers, then it is installed quite high quality, and the modification is classified as medium hardness. Bendix in this model has a steel type. In the store for the indicated electric scooter today they ask about 33 thousand rubles.
Models of Mustang
This company is most specialized in the production of electric scooters for children. At the same time, adult models are available in her assortment. Their frames are most often made of aluminum alloy. At the same time, racks are also used of steel type. Frames are most often installed not wide. Due to this, the presented brand scooters weigh a little. Special attention should be paid to the power of models.
Today, maximum speed devices are capable of developing up to 1 km per hour. In this case, motors are often used asynchronous type. The shape of the steering wheel modifications are quite different. By color, choosing a suitable model is simple. Another distinctive feature of the presented devices can be called quite high-quality brake systems. At the same time, the cables they use are very durable. On average, a scooter with an electric motor of the presented brand will cost around 30 thousand rubles.
Description of the scooter "Mustang BL350"
Today, this scooter with an electric motor without a steering wheel is in great demand. The brake system in this case is installed on the rear wheel. The stand for this model is provided by the manufacturer from an aluminum alloy. The base of the presented instance is used quite solid. If you believe the feedback from consumers, then the protective pad on it is practically not erased. The batteries for this electric scooter are only suitable for the lithium polymer type. They charge on average about 20 hours. On the market for this model today they ask about 28 thousand rubles.
Overview of the Mustang BL800
The indicated scooter with an electric motor for adults differs from other devices by an all-welded frame. In this case, the steel step is used. At the same time, there is a special pad on the base for better stability. If we talk about the engine, then its power in this case reaches exactly 5 kW. Due to this, the specified electric scooter is able to move at a speed of up to 13 km per hour.
Special attention in the presented model deserves the quality of the drive. In this modification, it is installed belt type. If you believe the reviews of experts, then the gears in the device wear out rather slowly. In addition, it should be noted that you can adjust the position of the steering wheel in this scooter. He stands in the store about 29 thousand rubles.
Differences of the Patgir scooter
The scooter with a Patgir electric motor has a fairly wide base. In this case, the frame is used steel type with a circular cross section. In addition, it should be noted that the accelerometer of the presented instance has a button type. In turn, the drive is installed by the chain manufacturer. If you believe the feedback from consumers, the power reserve parameter is at around 30 minutes. Tires in this case are used with a double rim. The starter at the same time has a foot switch and turns on quite simply. The footboard of the presented electric scooter is integral.
The batteries in the model are lithium-polymer type. A replacement kit is included as standard. If we talk about the shortcomings, it should be noted a weak stance. In this case, its diameter is only 2.5 cm. The electric motor in this scooter is installed in a protected box, and its power is at around 5 kW. The nozzle on the drain is used friction. Separately, it should be mentioned that the gearbox is provided by the manufacturer for the axial type. In the market for this scooter with an electric motor are asked in our time about 44 thousand rubles.
Scooters of the Razor trademark
Electric scooters of this trademark stators, as a rule, have a foot type. Drives in this case are used both belt and chain type. In this case, accelerometers are often installed push-button option. If you believe the reviews of experts, then the wheels of the model in the standard set are included quite durable. Of the shortcomings, only weak bases can be noted. In some cases, they are available without overlays. A good scooter with an electric motor of the presented brand will cost around 47 thousand rubles.
Opinion about the "Razor E300" model
Many buyers of the presented electric scooter prefer their compactness. At the same time, it can be transferred quite simply, since it weighs in assembled form only 10 kg. The bushings in this case are used with bearings. In turn, the couplings are installed medium hardness. Separately, it should be noted that the bendix in this model is missing. In this case, the gearbox is installed quite high quality. If you believe the feedback from consumers, then the case is provided by the manufacturer is very durable and is not afraid of mechanical damage. On the frame there is a special nozzle for this model. It is made of ordinary rubber. The brake system is used disc, and it has a flexible cable. Also of the features it should be noted that the width of the base is as much as 12 cm. Thanks to this, the stability of this electric scooter is at a high level.
The stand in diameter is exactly 3 cm. The steering wheel in the presented configuration uses a direct type. It can be adjusted in height with a wrench. Batteries in the standard kit are lead-acid type. It grabs them during continuous use for about 30 minutes. In this case, the starter is installed next to the gearbox. The electric motor of the presented instance is located in a special protective casing. This electric scooter on two wheels costs around 48 thousand rubles.
Review scooter "Razor E100"
This scooter with an electric motor for children is made with a rather convenient folding footrest. The base width in this case is 10 cm. In addition, it should be noted that the accelerometer in this model uses a standard one. However, the drive is installed belt type. The power reserve of this electric scooter is at the level of 30 minutes. The rims in this case are double. In turn, the starter has a foot type.
If you believe the feedback from consumers, then the batteries in the presented model are quite powerful. Recharging their time takes approximately 35 minutes. The stand at this electric scooter is fully welded. The maximum speed indicated model can reach 10 km per hour. The gearbox in the presented modification is missing. On the market for this model asking about 37 thousand rubles.
Description of the device Evo F1
The Evo electric scooter is quite simple. The stand is made of aluminum alloy. Additionally, it should be noted that the front and rear bushings are made with bearings. In this case, the coupling is provided by the manufacturer of medium stiffness. Bendix in this model uses steel, and its diameter is 2.3 cm. The gearbox is located near the electric motor of the axial type. Friction nozzle on the frame is available. Also of the features it is important to mention a quality starter. This model is worth 40 thousand rubles today.
Models of Volta
Electric scooters of the presented brand are distinguished by fairly high-quality bushings. In this case, the bearings are of the swing type. In turn, couplings of different stiffness. With stabilization, most models are fine. Separately, it should be noted that the market has a lot of folding modifications. They weigh extremely little and are very easy to transport.
Gearboxes in electric motors are most often used axial type. At the same time, they are capable of developing maximum power of about 12 km per hour. Nozzles based on the most diverse. The cables in the brake systems are quite durable. At the same time, the racks most often have an all-welded type. Today, a high-quality electric scooter on two wheels of the presented brand will cost around 38 thousand rubles.
Description of the device "Volta Elite 800"
Most users respond positively to this model. In this case, the hub is installed only at the rear wheel. Bendix is used exactly 2.5 cm in diameter. The gearbox is mounted with a crank type. Due to this, the maximum frequency of the model does not exceed 50 revolutions per minute. The nozzle on the base has a friction. If you believe the feedback from consumers, then it protects against metal corrosion reliably.
In addition, it should be noted that the brake system is installed only at the rear hub. At the same time, the handle is quite high quality and is covered with a rubber seal. The width of the base in this case is 10 cm. In turn, the rack height is 45 cm. The manufacturer does not provide a protective coating for it. Electric scooter batteries come with a lead-acid type as standard. If you believe the feedback from consumers, then they are enough for exactly 30 minutes. In this case, the batteries are charged in approximately 25 minutes. The specified scooter with an electric motor will cost around 30 thousand rubles.
Opinion about the Volta Elite 1000 model
Said electric scooter has many advantages. The base he uses is solid and has a thickness of exactly 2 mm. All this suggests that she is practically not afraid of mechanical damage. However, this cannot be said about the stand. The thickness of the metal in the steering column is only 1.2 mm. The brake system in this case, the manufacturer provides a cross-type.
A sleeve is standardly available with a range of bearings. At the same time, the coupling is used quite high quality, according to experts. High stabilization of this electric scooter is achieved through a wide gasket. In this case, the electric motor is fully protected. The stator box itself is equipped with a rubber casing. Presented electric scooter in our time is about 32 thousand rubles.
Electric motor for the device
To make an electric motor for a scooter with your own hands, it is necessary to prepare a crankshaft, a rotor and a gearbox with a primary winding. First of all, a block for the model is selected. As a rule, in this case a steel case is used. A small hole is made in it for the shaft. After that, the gearbox is fixed directly. To connect the rotor to the device, you will need to use a blowtorch. At the end of the work, it remains to fix and lubricate the shaft.
Self-assembly scooter
Making electric scooters with your own hands is quite simple. First of all, many experts advise choosing a base. To do this, you can take a plate of aluminum. In this case, steel can also be used. In this case, it is more advisable to take the engine from the drill. After that, a low-frequency gearbox is selected.
The sleeve with bearings will have to be purchased at the store. It must be at least 5.5 cm in diameter. In this case, the coupling is installed last. A starter box will require a protective box for the starter. After installing the steps, it will be possible to fix the rack. Next, the brake system with the steering column is folded.
5 kW model assembly
To assemble a 5kW scooter with an electric motor with your own hands, you need to choose the appropriate motor. After that, the base for the model is cut as standard. The next step is to fix the electric motor to it. For this, it is best to use screws. However, you can use a welding inverter.
Next, to make an electric scooter with your own hands, you need to connect the starter. It is more expedient to select it of the foot type. The brake system is caught only after the rack. To do this, you must first measure. After installing the rack, the steering column is directly welded. For convenience, you can install rubber pads on it.