How to install horizontal blinds: step-by-step installation instructions, tips, photos

In addition to tulle and curtains, blinds are also installed on the windows. They serve to protect the house from the rays of the sun and prying eyes. These products are easy to install and remove. But in the absence of experience, some difficulties may still arise. How to install horizontal blinds is described in the article.

Kinds

For the room choose vertical, horizontal, roll, pleated, attic, interframe, for arches and bay windows. They sell Roman curtains and multi-texture, with electric and protective, as well as photo blinds.

Blinds do:

• from wood;
• bamboo;
• metal;
• tissue;
• plastic;
• paper.

Horizontal blinds are one of the most popular because of convenience, reliability, affordable cost, and light-shielding properties. They are used to decorate windows and other openings.

Install cassette options

If the owner fixes the blinds himself, then the manufacturer does not provide a guarantee. This is due to the fact that due to improper installation of the sash may not work, so the curtains will be unsuitable for use. In addition, glass or frame is damaged due to irregularities.

If there is no experience in performing the work, then it is advisable to consult a specialist. During the installation, you need to determine the fastening methods yourself, and also buy the blinds themselves. Preparation of tools and materials is still required.

Mounting Methods

How to install horizontal blinds? The fixing method depends on the window opening:

1. To visually increase the window opening, the cassette must be mounted on a wall above the opening. The block can be much wider than the opening, and the height is larger than the frame. In appearance, these are full-fledged curtains.
2. With a wide window opening, the window sill is used as an additional shelf. In this case, the fastening takes place on the upper slope of the opening - like installation on the ceiling. Then the window will be visually larger. With this mount, the flowers will not be in eternal shadow.
3. If the window is large, then the curtains are fixed on a fixed frame, on the opening alignment, on the glazing.

Each owner can install horizontal blinds with his own hands, because there are step-by-step instructions for performing this work. Self-assembly allows you to save.

Materials

After choosing the mounting method, you need to prepare the tools. For work availability is required:

1. Roulettes. Its length should be sufficient to measure the width and height of the opening. When attaching the cassette to the frame, the width of the lamellas should be 2-3 cm less than it. Otherwise, the cassette blades interfere with each other.
2. Marker or pencil.
3. Phillips screwdrivers, screwdriver.
4. Drill or punch.
5. Dowels, screws, brackets.
6. PVA glue or liquid nails.
7. Pliers.
8. The hammer.
9. Plumb.
10. Level.
11. Step-ladders.

The presence of these devices will allow you to complete the installation efficiently. Depending on the method of attachment, many tools may not be needed.

On the wall

This method is one of the most common. It is suitable for both plastic windows and wooden. How to install horizontal blinds on the wall? To perform marking for the brackets on the wall, it is necessary to assemble the blinds, taking into account the instructions:

1. Retreating from the edges of 15 cm, it should be noted the areas of attachment. This is done by tape measure and level.
2. The bracket should not be in the location of the latch or in the place of the control system, otherwise the operation of the curtains becomes more complicated. Between the brackets there should be no more than 60 cm. Usually the width of the cartridge block is not more than 2.2 mm. When the window is large, several blinds are executed.
3. When the brackets are installed, push the latch forward. Carefully insert the top cornice under the bracket latch, press it against the wall and rotate the latch 90 degrees.
4. The rotation of the lamellas is carried out by the control handle, which is included. Its length should not be more than 2/3 of the length of the canvas.

This is the whole instruction on how to install plastic horizontal blinds. Proper operation ensures uninterrupted operation of the window structure.

To the ceiling

How to install horizontal blinds to the ceiling? The procedure is the same as for the wall. The differences are in the method of mounting brackets. When installing to the wall, horizontal holes are used, and during mounting to the ceiling or upper slope, vertical holes are used. The procedure is as follows:

1. Use the tape measure to set the center of the window opening and perform the marking symmetrically. If mounting occurs on the brackets, it is necessary to attach the cassette with the blinds and check their operation.
2. Then the labels are connected and the horizontal is checked using the level. Holes are made with a drill or puncher: under a self-tapping screw with a drill of 2.5 mm, under a dowel - it all depends on the plastic element.
3. When fixing the brackets, it is necessary to check the correct position of the cartridge. It is only necessary to fix the brackets, fasten the cornice by turning the latch 90 degrees to the left and insert the plugs. If the fixation was performed with the blade, then the work is completed.

This instruction is used when you are interested in how to install horizontal aluminum blinds. High-quality work allows you to securely fix the product without disrupting the operation of the window.

On the sash

How to install horizontal blinds on a window, on a sash? For this, self-tapping screws are used, violating the integrity of the frame. But mounting is possible without drilling.

If self-tapping screws are used, their length should be no more than 10 mm so that they do not pierce the frame and do not violate the tightness of the window unit. After marking and fixing the brackets with self-tapping screws, it is necessary to fix the blinds by the previously indicated method.

Scotch tape

How to install horizontal blinds without drilling? For this, double-sided tape is used, intended for construction work. There are 2 ways to install:

1. Adhesive tape is glued to the cassette, and it is glued to the window.
2. The clamp brackets are glued to the tape, and the cassettes are fixed to them.

In both cases, you must follow the instructions:

1. This method should be used in the warm period.
2. You should wash the frame or glass, dry the fixation place and treat it with acetone or solvent.
3. Mark with a pencil, cassette, level. The line should be parallel to the windowsill so that there is no skewed gap below.
4. Remove the protective film of adhesive tape and stick on the intended line.
5. Fix the canvas.

Brackets

Still how to install horizontal blinds on plastic windows? Bracket clamps convenient for sashes. They come in several forms, but they are all easy to operate. To do this, use the following instruction:

1. When assembling the cornice, it is necessary to fasten the canvas and assemble it.
2. Clips measure on a eaves. It is required to control the operation of the unit.
3. Open the sash and snap the clip. Separation of the cornice and the clamp is allowed, after which they are snapped onto the leaf, and then the cornice is fixed to the clamp.
4. Some clamps have stops that must be fixed to the cornice.
5. Clips with magnets are installed on the bottom of the sash.
6. It is necessary to fasten the canvas.
7. Magnets are fastened from the bottom of the louvre block and the clips on the sash.

Removing Blinds

Since there are many types of cassette blinds, removal methods are also available. If the products are fixed on the twist brackets, then remove them by turning the latch to the right 90 degrees, while they must be held. With a turn, the cornice will be weaker, its top must be tilted to the wall. After that, you can remove the blinds. Depending on the purpose, the web is pre-assembled or left uncovered.

If the curtains are made in the form of a full cornice, then you need to carefully unfasten the upper decorative strip. It has a curtain mechanism. It is required to pick up the canvas from the bottom up, raise the blinds up and to the right, eliminating them from the grooves.

If you use these instructions, it will be easy to install and remove the blinds. All methods are affordable even for beginners. Correctly fixed curtains will be an excellent functional thing and decoration of the house.

Thus, horizontal blinds can be installed independently in several ways. Which one to choose depends on the desire. The main thing is to accurately and efficiently perform the work.