Quite often, during repair, systems of bulk floors have recently been used, which are distinguished by durability, wear resistance and strength. Among their positive qualities can be identified safety and environmental friendliness. Since the creation of such coatings, major technical changes have occurred. For example, polyurethane coatings are presented in a wide range of colors, which is especially true for 3D bulk floors. With their help, you can create real masterpieces of design.
Can a tree be used as a base?
Quite often, masters ask a question about whether it is possible to equip a bulk floor on a wooden floor. The answer is positive, however, before laying such a coating, it is necessary to analyze the rough base, and also to determine whether it needs preparation. It is only necessary to carry out installation work on wood if it is well preserved, and it is recommended to use a thin-bulk mixture to equip the final surface, which will not be able to significantly increase its height.
Preparatory work
The bulk floor in a wooden house can be equipped not only with the above-described variety of rough foundations, but also with concrete. Before pouring any surface to be prepared, the first thing is to remove the skirting boards and remove the fasteners from the walls. Then the master performs surface scouring; for this, appropriate equipment should be used. If the room has a small area, then you can cope with the help of a manual cycle. The next step is to hide the cracks using an encryption machine. Such errors during operation in any case appear on a wooden floor. The resulting irregularities and cracks are treated with putty, which after application is left to dry completely. Then the surface should be sanded with coarse sandpaper, which will improve the adhesion quality.
Preparation Recommendations
The bulk floor on the wooden floor will last long if the base is cleaned from dust after grinding. It is most effective to use an industrial vacuum cleaner for this . Before priming, the base is degreased. A primer is necessary to increase the adhesion strength of the material to the wood. The composition is applied in two layers, before work can be added to it sifted quartz sand. This will provide the most reliable adhesion between the polymer coating and the base.
Tool preparation
If you wondered whether it is possible to apply bulk floors to a wooden floor, then the answer will be unequivocal. Such work is carried out today quite often. It is important to properly prepare the surface and take care of the availability of the appropriate tool. To remove the skirting boards you will need wooden wedges, a nail puller and a chisel, but for wood processing it is necessary to prepare a looping machine and a device for grinding. You can finally prepare the surface using coarse-grained emery paper; an industrial vacuum cleaner will allow cleaning the base. To apply to the surface of the primer, you need a brush or roller. Quite often, these tools are used in tandem, since not all hard-to-reach spots can be processed with a roller. To distribute the polymer coating most effectively allow the roller with a short pile and a flat brush. The master will need a spatula and a squeegee. It will be possible to knead the solution for arranging the bulk floor with a construction mixer or a drill. The bulk floor on a wooden base is best poured in special clothing, wearing safety glasses, a respirator and gloves. To move on the surface you will need special soles with spikes. This will allow the master to move around the freshly laid layer.
Technology of work
Laying a polymer floor on a wooden floor is no different from a procedure that involves the use of concrete as a base. Only the preparatory phase is different, which was discussed in more detail above. Before pouring the bulk floor, prepare the solution using the instructions. The dry mixture should be mixed with water until a homogeneous mass is formed. The resulting solution is laid out on the base, while moving forward is necessary from the far corner of the room.
The bulk floor is poured onto the wooden floor, then it is leveled with a spatula until it is possible to reach the required layer thickness. If we are talking about a wooden coating, then the thickness should be five millimeters or more. The needle roller acts as the most optimal and convenient tool for leveling and combating bubbles. The intervals between batches should not be more than 10 minutes, otherwise the joints will be clearly visible. But even so, the connection of the solution strips must be carefully rolled with a roller. As soon as the filling is completed, you should cover the hardening surface with a film, this must be done 15 minutes after completion of work. This will eliminate dust settling. After applying the base layer and hardening it is possible to proceed to the application of a topcoat, in its role can be varnish or polymer.
The cost of work from specialists
The bulk floor on a wooden floor will hold firmly enough if you are guided by the instructions provided. This process can be called quite simple, and you can implement it yourself. But if financial opportunities allow, it is recommended to hire a team of specialists who guarantee high quality performance, carry out installation according to technology, and also give a guarantee for the work done. As a rule, specialists use expensive construction tools. All this adds up to the cost of preparatory, priming and manipulation of the mixture. For one square meter of preparation of a wooden base you will have to pay 400 rubles, while applying a primer costs 200 rubles. for one square meter. Specialists fill the surface with quick-drying bulk compounds for 400 rubles. for one square meter.
Recommendations of specialists
If you want to make repairs in a living room, it is recommended to choose a mixture based on polymer resins. If there are places of high humidity, then they should use an epoxy filler, while a polyurethane floor is suitable for the rest of the house. If you think about the question of whether it is possible to fill the bulk floor, a wooden floor can be an excellent foundation. If there is a boardwalk, it should be repaired, and peeled floorboards replaced. Fasteners are tightened, cracks are filled with sealant or wood glue. The latter is mixed with an equal volume of sawdust. On a wooden base should be waterproofed. Do not neglect the need to apply a primer, two layers of which will facilitate the main work and increase the strength of the coating.
Secrets to Using Finishing Blends
A bulk floor on a wooden floor will look very good if the rough base does not have gross relief flaws. It is desirable to exclude them, since the thickness of the stacked layer does not exceed 5 millimeters. Even if the leveling mass can smooth out the tubercles and depressions, there is a good argument in favor of eliminating defects. Self-leveling floors will harden unevenly, while the strength indicator will vary.
It is also important to choose the right dry composition, the ingredients of which will determine the purpose of the future sex. For example, if the mixture has cement in the role of a binder, then this composition is suitable for filling the floor in bathrooms, kitchens, showers and bathrooms. If we are talking about mixtures with gypsum in the composition, then this floor is best used for rooms with dry and low humidity, there will demonstrate all its positive qualities of the bulk floor. A wooden surface can also be used for the base, in which a heating system will be present. In this case, you should choose a leveling mass, which has increased elasticity. It will expand and contract during operation without cracking.
Conclusion
Sometimes the bulk floor is separated from the wooden surface with oiled paper, which is covered with an overlap. In this case, the layer should be filled in with a thickness of one or two centimeters. The border between the screed and the bulk floor should be formed by surface treatment with waterproofing impregnation.