The company "Strida" in 2002 amazed many people with a new line of compact bicycles. They were created special for city trips. A distinctive feature of these models is considered to be an A-shaped frame. Brake systems are most often used disk type. Steering columns today are the most diverse. At a price, Bridal bicycles are not much different. An average model of the above brand will cost around 50 thousand rubles.
Overview of the Strida SD2 model
This small folding bike Strida brakes has a disc type. The pads of this model are used in the Avid series. Special attention should be paid to grips in this bike. There are two of them in total, and they are used in the Bond series. In this case, the pedals are provided by the manufacturer plastic. A seatpost with a diameter is included in the 2.3 cm kit. The saddle on the Bicycle SD2 Strida is used with a spacer. The cassettes of the presented model are installed type "C970". These bikes are (Chinese) Strida in the market about 54 thousand rubles.
Reviews on the bike "Strida SD2"
This bike strida reviews has good. To date, this model is in great demand. For travel to work, it fits perfectly. However, it should be borne in mind that the wheels are mounted on it with a small diameter, so it is uncomfortable to move around on uneven terrain on the Strida SD2 model. The brake system in this case is quite reliable. Also, many buyers are pleased with the fact that the saddle is very easy to configure. You can also adjust the steering column. Cassettes in the Bridle SD2 bicycle break quite rarely, but there are still disadvantages. First of all, it should be noted the rapid wear of the teeth of the sprocket. In addition, problems with the owner may occur with the carriage.
Parameters of the Strida SD3 model
This Strida bike is equipped with an A-frame. The brake system in this case is used disk type. Pads in the presented model are used in the Code series. They wear out extremely slowly. The grips of the "SD3 Strida" modification are provided by the manufacturer of the "Bond" type. The bicycle seatpost is on two supports.
The sprocket, in turn, is installed with a thickness of 2.1 mm. It should also be noted that the modification "SD3 Strida" is equipped with rockings. The tensioner in this case is absent in the model. The indicated Strida bike is worth around 48 thousand rubles.
What do they say about the SD3 Strida model?
This bike Strida reviews deserves a positive. The specified model has many advantages, and first of all it should be noted, of course, its compactness. Folding it is quite simple and transporting it in the Strida SD3 machine is possible without any problems. Additionally, it should be noted the low weight of the presented model. The steering column in this case, the manufacturer provides a wide.
Due to this, it is possible to manage the Strida SD3 model in urban conditions with great comfort. The saddle is also comfortable, and the owner has the opportunity to adjust its height. Rockings in this case are used on two flanges. If you believe the feedback from consumers, they wear out very slowly. The disadvantages of the presented bike are practically absent. However, it should be noted that the shifters are installed flat and are not adapted to high loads. Thus, overloading the Strida SD3 bike in this case is undesirable.
Characteristics of the Bicycle SD5 Strida
This Strida bike differs from other devices in that it uses protection for an asterisk. The chain tensioner in this case, the manufacturer provides a series of "Herbs". In turn, the rockings are used standard. The bike switch "SD5 Strida" is missing. Cassettes in this case are of the "C970" class. The carriage of the Strida SD5 bike is fairly wide. She is able to withstand large loads. The saddle of this model is located on a strong stick. Its diameter is 3.3 cm, and the thickness is 2.2 mm. The frame of the SD5 Strida model is A-shaped.
The steering column manufacturer provides a series of "Pris". The brake system deserves special attention in the attached bike. In this case, it has a disk type. In turn, the pads are installed class "Code". The straddles on the SD5 Strida bike are of a plastic type. This modification is worth about 51 thousand rubles today.
Consumer reviews for Strida SD5
Many people find this Strida folding bike a good fit for urban travel. The carriage of the presented instance is used quite high quality. If you believe the feedback from consumers, then the asterisk is erased extremely rarely. Special attention in the bike "Strida SD5" deserves the quality of the cassette. It is installed in this case of a flat type. In this regard, she does not wear out the shifter when riding.
Another advantage of this modification can be safely called the presence of a tensioner. The Strida SD5 bike is fairly easy to maintain. If necessary, flu can be cleaned easily. In this case, the saddle is disconnected without any problems.
Description of the EVA 5.2 Strida model
The take-outs of this bike are provided by the manufacturer for the plastic type. The rotors, in turn, are used with one fixing nut. Also, this model differs from other devices in a double cassette. In this case, it is used flat type. The tensioner of the "Strida EVO 5.2" model, unfortunately, is missing. The rocking rods of the bike are mounted on two flanges. The switch in this model is standard and does not stand out.
Shifters are used with a cable and are quite compact. A saddle comes standard with a spacer. Special attention in the presented model deserves the type of steering column. It is installed quite wide and you can adjust it in height. In this case, the pedals are of the contact type. Rubber pads are used on them. Today there is a Bicycle Strida 5. 2 about 51 thousand rubles.
Customer Reviews for "EVA 5.2 Strida"
The advantages of this model are obvious. The saddle is used in high quality and barely erases. If you believe the feedback from consumers, then control during the trip feels good. In this case, the rockings in this case are set fairly wide. The sprocket is used sturdy and the teeth wear out extremely slowly. A strong frame deserves special attention in the presented model. It is made at the factory from a special alloy of aluminum and can withstand a large person without problems. It should also be borne in mind that the pads are used in the Avid series. Today they are in great demand because of their durability.
Characteristics of the LT5 Strida
The pedals specified compact folding bike Strida has a contact type. The frame in this case is installed with a circular cross section and can withstand large loads. The brake system of the presented model has two flanges. The rotors in the LT5 Strida bike are mounted with a protective nut. Brake levers are provided by the manufacturer in the Code series. Special attention in this model deserves the Bowden. They are installed in this instance are quite wide.
The manufacturer provides for plastic outlets and the shifters are rarely erased. In turn, the LT5 Strida has influenza with a diameter of exactly 3.5 cm. The seatpost is made of steel at the factory. It is possible to regulate his position with the help of rockring. The chain tensioner in the presented model is missing. It should also be noted that the switch is installed standard and works from cassettes. The asterisk in this case is used exactly 2 mm thick. The indicated folding bike for the city of Strida is currently worth about 48 thousand rubles.
Owners reviews about the Bridle LT5 bike
Nowadays, these compact Strida bikes are in demand in many countries. However, it should be borne in mind that they need periodic inspections. First of all, it is important to note that the rockings in this case are used flat. The cuff is supported in this situation on a strong washer. Due to this, its wear is extremely small. It should also be mentioned that the carriage has a diameter of only 2 cm. Due to this, it is rarely erased. If you believe the feedback from consumers, then controlled model "Strida LT5" at high speed is good.
The saddle in the presented configuration applies wide. Despite the fact that the column is used plastic, it can withstand large loads. Even a child can adjust the seatpost. In this case, the Bowden are used in high quality. Also, the folding bike Strida LT5 differs from other devices in that the frame at its bottom is thickened. Thus, the probability of its deformation is extremely small.
Folding models "Bickerton"
The bicycles of this company are very compact. They differ from the "Strida" modifications in that they are available with various frames. To date, the market has many modifications with open pads. In this case, the seatposts can be of various shapes. On average, stars are about 2 mm thick. Of the shortcomings, we can quickly note the rapid wear of the cassettes. They are installed in this case of a double type. Also of the minuses, it is important to mention the rapid wear of the pedals. An average model of the above company will cost around 46 thousand rubles.
Overview of the Bickerton M2 Model
This bike is characterized by fairly strong rockings. They are used in this case on three flanges. In this case, a clamping ring is used on them. The switch on the Bickerton M2 bicycle is set to medium hardness. The cuffs in this case are provided by the manufacturer of the "C50" series. In turn, the carriages are used quite flat, and they are connected to the model "Bickerton M2" directly through the bushings. The sprocket in this case has a thickness of exactly 2 mm.
The saddle by the manufacturer is provided for by the Kros series. It is included in the standard kit with a spacer. The steering column of this bike is made elongated. In this case, the handles are used with plastic pads. Due to this, managing the model is quite comfortable. The seatpost diameter is 3.1 cm. The grips of the presented copy are used by the company of the “Roll” class. Unfortunately, the Bowden M2 model has no Bowden. It should also be noted that the offsets of the bike are quite small.
Folding Orbea Models
The bicycles of this company are quite low in size. It should also be borne in mind that their frames are most often used A-shaped. In turn, the steering columns can be found on the market are diverse. The rotors of many models are used on two flanges. If we talk about the benefits, it should be noted the high quality of brake systems.
In this case, only double bowden are used. In turn, outbursts can be found both plastic and metal. Special attention should be paid to grips in bicycles of the indicated brand. They are installed, as a rule, of the Kram series. Many buyers prefer the models of the presented brand because of high-quality stars. There is an average model of this brand in the region of 45 thousand rubles. However, you can find cheaper options.
Differences of the Orbea 330 model
Unlike Strida, a bicycle (Orbea analogues) boasts a fairly solid A-frame. In the lower part, the metal thickness reaches 2.3 mm. In this case, the tensioner is provided by the manufacturer as standard. In turn, the rockings are used in the C50 series. The switch on the Orbea 330 bike has low rigidity and this should be considered before buying it. This model is controlled in urban conditions quite comfortably.
The brake system is installed in the Sore series and stands out for its smoothness. At the same time, the sleeves of this bike are erased extremely slowly. Manufacturer pads are used only in the Rohre class. The outbursts in this case are of a plastic type. In turn, high-quality grips are not capable of boasting. The seat tube has a diameter of 2.4 cm. The saddle is attached to it by an aluminum clamping ring. There is a market bike Orbea 330 (analogue of the Strida) about 51 thousand rubles.
Kent models
Bicycles of the specified company are in great demand nowadays. In terms of compactness, they are able to easily compete with models of the company "Strida". Braking systems are most often installed on the rear wheel. Rotors are used on both two and three flanges. Pads in size are quite different. As a rule, they are installed in models of the Race class. Plastic handles are made directly, however, they are very rarely washed.
Special attention to the bikes of the above brand deserves the quality of the Bowden. Today, both double and triple modifications are presented on the market. Gripses on the characteristics are quite different. In turn, only plastic ones are available. Their average thickness is at around 2.3 cm. Pedals are most often found in contact type. Steering columns in width can be different. In this regard, the buyer can choose a comfortable model for himself without any problems.
The saddle is most often seen with a spacer, but there are models without it. Special attention also deserves the quality of the sleeve. It is mounted on fairly wide carriages and breaks extremely rarely. The "C40" series are used directly, and they are made from aluminum at the factory. A quality model will cost the consumer in the region of 50 thousand rubles.