Connecting the amplifier to the car radio is a simple task, even a beginner can cope with it. The main thing is to get all the necessary tools and details that you will need to install this system, and then the sound quality in the car will noticeably improve, become more perfect and clean.
In machines of a new plan, as a rule, an amplifier is connected during manufacture, so self-installation of this device is most often required for models of earlier years of production. It is also worth noting that the amplifiers are different, and, choosing such devices in the store, it is worth starting from the brand and model of the radio itself. So, the technique will be in accordance with each other, and the result will be a clean and beautiful sound.
So, in order to make the connection of the amplifier possible, you will need materials such as a cord through which the amplifier will be powered by battery power, an adapter to connect the device directly to the radio, as well as a fuse and fasteners with which it will be nailed.
Do not forget also that the amplifier should correspond not only to the radio itself, but also the power of the motor and battery. If the device is too new and designed for high power indicators, it may not be activated in the old type of machine . And vice versa, if the amplifier does not need a lot of power, and the car has a large supply of it, then the device will constantly overheat, as a result of which all the fuses will blow, and it will soon fail.
Connecting an amplifier involves pre-connecting a fuse. Its value should be slightly larger than the maximum current indicator characteristic of the battery. The fuse is mounted on a special flask, and if before this process it is found that it is in an unsuitable condition, the part must be urgently replaced. Otherwise, not only a fuse with an amplifier can suffer, but the radio itself.
Connecting a car amplifier has something in common with a similar procedure, which is performed at ordinary music centers. In order for the equipment to be activated, it must be connected with a special cable to the sound source itself , that is, to the radio. Such work will be successful if the corresponding connectors are found in which the wires are filled. The adapter cable connects to the line output, which is available both on the amplifier and on the radio itself.
After the connection of the amplifier and its connection with other parts of the car is completed, it is important to attach the power cable to it . It’s simple, because the connector is the largest for it, and even a child can find it. The cord is connected to a fuse, which, in turn, is connected to the battery, and after that it can be considered that the case is “in the hat”. After all the procedures, it is advisable to check the performance of the amplifier and its compatibility with the radio and the car in advance, before the car is on the road. If the connection of the amplifier was successful, then there will be no failures in its operation.