Liquid wallpapers act as an excellent finishing material, because they are distinguished by durability, environmental friendliness, in addition, their surface can be painted in any color without updating the walls during repair. However, if you decide to make repairs, then the old decorative layer will certainly need to be removed from the walls.
Such work is not difficult, but there are several pitfalls that you need to know about in order to avoid mistakes. It is even easier to remove liquid wallpaper from the walls if they have never been painted. But if the base was covered with water-based emulsion paint or varnish, then some efforts will have to be made.
Preparatory work
Quite often today, when decorating walls, liquid wallpaper is used. How to remove such a finish from the wall , you can find out if you familiarize yourself with the information presented below. The first step is to prepare. You need to think about protection. Using a spatula, you will ensure a minimum amount of contamination, but if you use a grinding machine, the dust will scatter in all directions.
In order to avoid unpleasant consequences, it is recommended to purchase masking tape, with which plinths, switches and sockets are sealed. After completion of work, it will be possible to get rid of adhesive tape, but there will be no trace left on the walls.
Furniture Protection
If you once used liquid wallpaper when decorating the rooms, you should certainly know how to remove such a finish from the wall. For this, power tools are often used. If you have any, then before you start using them from the room, it is recommended to remove the pieces of furniture or cover them with a thick cloth / film. During repairs, it is better to turn off the electricity and isolate the sockets so that no current can flow through the wet wall.
Using wallpaper softeners
Wallpaper will be easier to remove if you add special means to the water to remove them, among them you should highlight:
- dishwashing liquid;
- wallpaper remover;
- a composition of vinegar and fabric softener;
- wallpaper glue.
If you have liquid wallpaper on your walls, how to remove such a coating from the wall, you can find out if you read the information in the article. To facilitate the work in the water should be added liquid like Fairy. You can use any other household chemicals, some home masters advise using liquid soap. It will need 50 ml per 1 liter of water. In construction stores, you can find special compounds for removing different types of wallpaper. The advantage of this approach is harmlessness. The mixtures are odorless, convenient to use and quickly begin to act after application.
You can prepare the liquid according to the type of "Methylan" yourself. To do this, you need to take 5 liters of water, adding to them two tablespoons of vinegar and the same amount of conditioner for washing clothes. A jelly-like mass suitable for application can be prepared from wallpaper glue, to which a wallpaper remover is added .
Liquid Wallpaper Removal Technique Description
If during the repair several years ago you used liquid wallpaper, how to remove them from the wall, sooner or later you will want to find out. The simplest, but most time consuming, is the method, which involves the use of a metal spatula. This option is suitable if the wallpaper has not been subjected to additional treatment with varnish or paint. It will be easier to remove the coating if it has viscose fibers.
It is more difficult to remove wallpaper by the type of liquid plaster. For work should be used:
- metal spatula ;
- bucket;
- wide brush.
If you do not have a spatula, then you can purchase it, but you need to choose a tool that has a curved handle. The bucket should be filled with warm water.
Recommendations for work
If you wondered how to remove liquid wallpaper from the wall, then in the first stage you need to add special tools to the water that can be made according to the above recipes. Using a brush, the solution should be applied to the wall, evenly distributing it on the surface. Leave it until the coating begins to soften. It is important to wait a certain time until the paper swells. Then you can begin to work with a spatula.
Wallpaper should be sufficiently flexible, otherwise the process will be difficult. Before you remove the liquid wallpaper from the wall, you must remember whether the composition was used for their application, which involves repeated use. In this case, the finish is laid out on a flat surface for drying, and after that it can be laid in a bag for re-application. Sometimes it happens that the coating adheres quite tightly to the wall, in this case the use of a spatula will not help. Then you can use different power tools.
Removal Features: use a grinder
Quickly remove liquid wallpaper from the walls using special equipment such as a grinding machine. This method involves the use of physical force and is accompanied by the formation of a large amount of dust. However, you can save time and remove coverage of arbitrarily high density.
During operation, the machine should be firmly pressed to the surface. The master needs to wear a respirator and safety glasses. Many home masters, wondering how to remove liquid wallpaper from the wall, come to a solution that involves the use of an angle grinder, you need to purchase a grinding wheel for it. You can use special nozzles that protect the surface from deep penetration. The tool must have high power and a reinforced body. It is important to remember that the grinder acts as a traumatic tool, so the operator should be careful when working with it.
Conclusion
If you used liquid wallpaper during the repair several years ago, how to remove it from the wall, the correct technique will allow you to understand. Sometimes technology involves the use of an industrial dryer. A similar approach is relevant for those who do not want to mess with a simple spatula, but do not have a grinder in the arsenal.
At the first stage of such work, the walls must be moistened with plenty of water, and then heated with hot air. It penetrates into the deeper layers, and the coating is easily behind. Before removing liquid wallpaper from the walls using this method, it is recommended to prepare a scraper.