Repair is a complex process that has its own sequence and rules of execution. Before you start, it is worth preparing. Floors can have a variety of finishes. In stores today, a large assortment of goods at different prices and from any manufacturers. But the most common form is linoleum. It is easy to lay it down; it has a long operational period and is suitable for different interior directions. But sometimes before you install a new one, you have to clean the old one or leave it. What to do in this situation? The question is relevant for many, so it is worthwhile to understand it in detail.
How to put linoleum on old linoleum? Sometimes you have to level the surface and only after that create a new coating. That preparation is considered long and thorough. There are many work options. Everyone can choose the right one, but dismantling is not always required, so before you start, you need to decide how everything will happen.
If you do not need to remove the old coating, then dust and dirt are excluded from the rules. How to put linoleum on old linoleum? There is on sale such a material, the basis of which is a dense substrate. He in this situation will be the best solution. But if there are too large swings on the floor, then you can not do without an additional correction. For the service life to become long, you will have to carefully fix it on the base.
Therefore, to the question of whether it is possible to put linoleum on the old, experts give a positive answer. This can be done, but provided that there are no major breakthroughs on it. But do not confuse - this does not include cracks and wiping, which occurs naturally during operation. It's about big torn pieces. Therefore, at the first stage, it is important to evaluate the coverage in all places and only after that start work.
Preparatory stage
If there are no serious gaps on the entire surface, then you can begin the basic preparation. It is not that difficult. This includes a few steps:
- Old baseboards should be removed. Everything is completely removed so that even the connecting strips do not remain. Dust and dirt usually collect under them. Rinse well thoroughly. If there are cracks in the wall, they should be foamed or sealant should be used. Before starting such work, it is worth stocking up with the right material and tools.
- Any small cracks in the area of the old finish must be sealed with sealant. Silicone can also be used.
- Then carefully level the surface with a spatula. Wait until completely dry.
All this will not take much time, but do not skip such a procedure, otherwise the new linoleum will not last long and will look messy. Most of all questions arise when an old linoleum was fixed on an uneven floor. If the differences are small, then putty or the same sealant can cope with them, but this is not always enough.
When the floor is uneven, you will have to do the dismantling of the old coating and level it. Have to perform a screed or experiment with a tree. But to lay a new coating on the wrong old - this will be at least the wrong decision.
Choose material
Is it possible to put a new one on old linoleum? Experts give a positive answer. As already noted, if you need to put new linoleum on the old, then the material should be dense. Better to have it with a backing. It is quite possible to do without it, provided that the floor is even, and the old coating is not too frayed and torn. The thickness of the substrate when choosing is important, but not only it will have to pay attention. So, we found out that you can put a new linoleum on the old. What material to choose?
- Homogeneous or heterogeneous. The first is single-layer and is suitable for those places where people are active. The second is done in several small layers. It is unique and has its own characteristics.
- Domestic.
- Commercial.
- Semi-commercial.
In addition, in every market there is always something new and modern. But before you make your choice, it is worth considering the main characteristics and sorting out the quality. Each linoleum has its own basics and rules for laying. Do not forget about them. The thicker the coating layer, the longer it will last, but the cost will be higher. No need to save, otherwise it will not work to achieve the desired effect.
Basic laying principles
How to lay linoleum on old linoleum? To answer this question is not so difficult, but subject to the observance of technology. Not everyone turns to the master, and sometimes this is not so necessary. But if the floor is a curve, then the amount of work increases, and the material as well.
There are recommendations thanks to which the coating is in place without difficulty. Each step should be performed sequentially:
- The first is to acquire the required size of the material, after which this piece is unwound on the floor.
- If cropping is required, then only one edge should be brought to this, and the rest should be distributed exactly along the perimeter.
- Use a sharp knife to trim, but sometimes it is possible with scissors. This is done clearly on the wall so that there are no bends.
- Further, with the help of baseboards, they press the entire sheet.
This is not so difficult, but provided that there is enough of the purchased sheet and its width. Although it is always easy to produce and join several sheets.
Join multiple sheets
What do I need to do:
- You can weld them on the cut line at home. For this, a heated iron is used. You need to lubricate the junction with PVA glue, and attach cellophane to it. Then paper is put in this place and is already pressed by the iron. But linoleum should not have a backing.
- Hot welding with a building hair dryer. But this is a professional method, and not everyone will cope with it.
- Cold welding. It is only available with special adhesives. The basis is monolithic, but this is also a professional direction and not everyone is available.
What do you need to know?
How to lay linoleum on old linoleum? Many could hear that this material needs to be rested, and this is true. Because in a twisted state, he spends a lot of time and after spinning stretches. Therefore, if you immediately nail it with baseboards, navels form. When he was on the floor, measured and, if necessary, docked, let him lie down. The best time is a day, although sometimes 12 hours is enough.
What next?
After this time, you can see that the size has slightly increased. Only after this is done the final trimming (in the same way as the first time). In addition, you can always put a laminate on old linoleum. It acts as a substrate, but under the condition that the floor is even. Before fixing the skirting boards, they are also tried on and the right amount is cut. There are docking plugs. You can’t do without them - they create a beautiful appearance. Although it is possible to use old materials, if they were not damaged during dismantling.
Wiring
Also, wiring is hidden in the baseboard. This method is convenient, after which it is closed with a special plug. The color choice of this supplement can be very different, both in tone with the main coating, and not. But it is better if they are close to each other, otherwise it will not look monolithic. Self-tapping screws are used for fastening, they are also removed under the baseboard. When all the actions are done, you can fix the baseboard.
What tools and materials are indispensable:
- The right amount of quality linoleum.
- Skirting board.
- Sealant, silicone, putty.
- Screwdrivers and screws.
- Glue mass.
This is basic, but depending on the process, something else may come in handy. So it's worth remembering this. Preparation will reduce the main work. A perfectly flat and neat floor is a complete change in the appearance of any room.
Conclusion
Is it possible to put new linoleum on top of the old? Now the answer is yes - yes. But provided that the old coating is quite suitable for the base - there are no gaps and drops. If serious defects are found, it is not necessary to spoil the new material. It is worth dismantling the old one. The decision is always made by the owner of the apartment, so it’s best to do it for years, even if it is temporary flooring. Performing all the work efficiently and according to the instructions, you can get a good result, and such a finish will last a long time.