In this article, the installation of the HP LaserJet P1102 printer will be described in detail and in stages. In addition to this, its real technical characteristics and cost will be given. All this will allow the potential buyer to make a choice, and the new owner - to configure it and start using it for its intended purpose.
Positioning
The HP Laser Printer of this model belongs to the entry-level printing solutions. This is primarily indicated by a fairly affordable cost. But the additional arguments in this case are the average quality of the output documents and the minimum set of methods for connecting. Also, similar positioning of this product is indicated by the fact that its monthly print resource does not exceed 5000 pages. As a result, this peripheral solution is perfect for creating a printing subsystem in a small office with no more than 10 workplaces. It can also be used quite successfully in a workgroup with the same number of PCs. Another possible area of its use is the house. In all other cases, this laser printer must be supplemented with another printing device for the reason that its monthly print volume will certainly not be enough.
Equipment
The HP laser printer of this modification is completed as follows:
Printer HP P1102.
Initial cartridge with 70% filling.
Power cord.
A disk with application software and electronic versions of the documentation for this peripheral device.
Quick setup guide on paper.
Warranty card.
The manufacturer did not include an interface cord in the documentation set, with which it connects to the system unit of a personal computer. This accessory will have to be bought by the newly made owner separately and at an additional cost.
Technical specifications
Solid enough, for the entry-level laser printing solution, HP P1102 has technical specifications. As noted earlier, it is based on the laser method of obtaining prints. Therefore, the print quality in this case is quite low, but it is more than enough to display text information, tables and diagrams. You can also count on getting pictures in mediocre quality. The advantages of this printing method include a large print volume for 30 days - about 5,000 pages for HP P1102, and speed - 18 pages in one-sided execution for a minute. In addition, it should be noted that the cost of consumables and accessories in this case is minimal. The maximum page size for printing is 210x297, or the most common A4 format at the moment. In addition to this, printing on pages with arbitrary size is possible: setting up the printer properly, this allows you to do it without any problems. The weight of the printing paper should be in the range of 60 to 160 g / m 2 . In this case, the connection method is one - USB 2.0, but you can use other compatible modifications of this universal interface for these purposes.
Cost
This printer is positioned by the manufacturer as an entry-level product. As a result, his cost should be very, very modest. Indeed, the price tag for this printer is quite affordable - 5000 rubles. This cost is fully consistent with its parameters and specifications.
Box removal
Installing the HP LaserJet P1102 Printer begins by removing it from the box. This procedure consists of the following steps:
Using the pointers on the box, we determine the opening location of the device.
Using an office knife or scissors, we cut the packing tape in this place.
We remove the peripheral laser printing device, cartridge and the rest of the “stuffing” from the box.
We remove the clips from the printer, which ensure its safe transportation.
Installation at the place of use. Connection
The next step is to install the HP LaserJet P1102 printer in a permanent place. As noted earlier, this peripheral device can only be connected to a personal computer or smart router using a wired USB interface . In both the first and second cases, all the functions of the print server are assigned to the nearest PC or router. Therefore, the printer should be as close as possible to such a server. The maximum permissible cord length for such a connection is 2 m. After installing the printer using the power cable, we connect it to the AC power network, and using the interface cord to a personal computer or router.
Cartridge
The next step is to install the cartridge in the HP LaserJet P1102 printer. To do this, remove it from the protective cover. Then open the front panel of the printer. In the next step, carefully install the cartridge inside. In the initial configuration, there is a cartridge model CE285A with a print resource of 500 pages. After refueling, this number increases to 700 single-sided sheets. There is also an improved modification of this cartridge - its model is CE785D. In this case, you can expect to print 1,500 pages from one refueling.
Driver Installation
Next, the HP LaserJet P1102 Printer Setup Utility should be launched from the CD. Next, following the instructions of the setup wizard, we install the drivers. In this case, the printer will be configured in automatic mode, and no actions should be taken from the user, except for those that will be requested by the wizard. Typically, the printer is turned on at this point.
Print a test page
The next step is to print a test page and check the health of the printer. Put the page in the feed tray. Then, on the PC turned on, go to the "Start" menu. Next, select "Control Panel." In it we find the icon "Printers" and open it. In the list that opens, we find HP P1102 and call its menu with the right button of the manipulator. Then select the “Properties” item. Then on the “Home” tab we find the “Test Page” button and click it. If everything is done correctly, printing of the test sheet will begin. Otherwise, you might say that the HP LaserJet P1102 printer installation failed. Find out the cause of this malfunction. It may be that the printer is turned off or the drivers on the USB ports are not installed. In general, it is necessary to conduct a comprehensive diagnosis of the computer system and find the fault. Then we eliminate it and repeat the printing of the test page.
Summary
In this article, the installation of the HP LaserJet P1102 printer was scheduled. There is nothing super complicated in the above algorithm, and each user of a personal computer can do this operation.