Skiing at both professional and amateur levels is perhaps one of the most popular ways of spending winter time with a huge number of people. Someone prefers to actively relax at the nearest rental point of this sports equipment, well, while someone purposefully goes to well-known ski resorts, in principle, for the same.
What determines the choice of mount?
Of course, the inventory itself plays one of the main roles in high-quality and pleasant riding. The range of skis today is very large, and they differ both in the brands of the manufacturers and in their purpose (cross-country, mountain, jump). Wide and price range, so you should immediately decide on the amount planned for the purchase.
Sometimes lovers of winter skating are faced with a very serious problem. How to install ski mounts correctly? You can entrust the installation process to specialists, but if you want to save some of the financial resources and just gain additional experience, you should understand the technology of this work yourself.
What does a ski mount consist of?
The design of this element, which is designed to ensure safety, includes the heel and front head, which must be adjusted in accordance with the parameters of a particular person (weight, boot size, etc.).
On the mount itself there are special pins, the function of which is to fix the boot. There are also special braces and bends that allow the leg to move freely inside, but do not allow it to slip. Typically, these elements have the shape of a toe boot, which cannot but have a positive effect on the comfort of riding.
The heel mount is designed to provide the skier with safety during falls. In modern samples, this ability is called vertical elasticity. In addition, using this part of the mount, the level of vibration entering the boot is significantly reduced.
How to ensure the installation of the latch?
So, the correct ski mounting is done in part by proper drilling. You need to do this not by eye and not using labels. Often, a special conductor can be purchased from the manufacturer, thanks to which a good result will be guaranteed.
For making holes, there is a large selection of drills, each of which is suitable for one or another type of ski: cross section 4.1x9.5 mm for metal coatings, 3.5x9.5 for wood, and 3.5x7 mm will be a good solution for junior sports equipment whose thickness is less than that of adult models.
After drilling all the necessary holes in the ski canvas, a small amount of glue is added to each of them, and then the mount itself is already mounted. Screws should fit tightly, without shifting.
This information can be helpful when thinking about how to install the ski mount.
Cross-country skiing: installation of fastenings
It is these elements that make it possible to clearly transmit forces and establish the direction of sliding when moving both in the classical style and in the ridge style. It is very important to focus on how to correctly install the ski mounts for running, since without this knowledge even well-selected equipment will not only not be able to bring any joy from skiing, but it can also put the owner in serious danger.
Cross-country ski lock categories
Currently, there are three types of mounts for this type of equipment, so each should be taken apart separately.
One of them is the outdated Nordic Norm 75mm, called in the masses "welt". Its main advantage is its relatively low price, but otherwise its technical characteristics leave much to be desired. It fixes the stop poorly and, despite the rigid fastening of the toe of the boot, the entire sole slides due to insufficient lateral and longitudinal stability. The ridge style of running in this case is almost impossible, and the classic one comes out a little better. Such an installation of mounts for cross-country skiing will not bring the owner pleasure from skiing, so you should pay attention to two other types of clips.
These samples belong to models of a new, innovative generation. These include the SNS system and the NNN system.
It will be quite difficult to compare these two mounts, since each of them is a device with extremely high performance.
The functioning of these two systems is based on the technology of using flexors and guides, which greatly simplifies the task of how to install fasteners. On skis with such clamps, the sole of the boot rests firmly and comfortably, and additional stabilization during skiing with both classic and skating gives a feeling of confidence and greatly facilitates the process of movement.
Functional features of SNS and NNN mounting systems
The level of fixation of each of these two samples is tourist, sometimes even equipped with automatic fastening. This option is perfect for amateur skiers, whose skiing skills are not too well developed.
The SNS system appeared a little earlier, and its main difference lies in the fact that the mount design includes only one longitudinal component, while the NNN type has two of them.
It is no secret that the main difference between cross-country and downhill skiing is the connection of the boots of the former with one or another type of anchorages. And since the differences between the two systems mentioned above are quite insignificant, here the emphasis should be placed solely on the choice of shoes. Having decided on how to correctly install the ski mounts, you should choose boots that will correspond to the style of skiing and be distinguished by unique comfort and design, and only then deal with the standard of their fixation.
Ski mounts
This type of sports equipment is suitable, as the name implies, only for skiing on slopes. Such skis are not suitable for running, as they have different length and width parameters, and also differ from other models in their technical characteristics. But, one way or another, it is extremely important to know how to put the mounts on this type of ski, since the descents from the tops require an increased level of safety, which can only be achieved by securely fixing the entire structure on the leg.
How to install ski mounts
In order to avoid a poor-quality work result, all actions for equipment of this type must be performed strictly according to the following instructions:
1. In the center of gravity of the ski, which you can find with your own hand, a line is drawn.
2. The mount is laid so that its leading edge reaches just to the drawn mark. A boot is carefully inserted into the latch, which is fixed so that its entire base is located in the center, since only in this case the installation of mounts on the alpine skis will be correct.
3. Then the boot is removed, and at its location through the holes in the lock, small holes are made that can be made with an awl or drill with a cross section of 1.5-2 mm in diameter. Then, using the screwdriver or screwdriver, the screws included in the kit are wrapped.
4. The boot is tightly fixed in the holes made. At the same time, it is important to observe the entire algorithm of actions so that at the end of all work the lock is moderately rigid, comfortably fits the leg and meets all the requirements of safety standards when riding.
This guide will help you figure out how to properly mount your ski mounts for riding on mountains and steep slopes.