A very affordable entry-level copier is the Canon FC-108. Most often it can be found in small offices with a relatively small workflow. It is his capabilities that this review is dedicated to.
In what cases is it best to use such an apparatus? Its equipment
As previously noted, most often such a copier is used in the office. At the same time, the document management system has a small volume. But also such a device can be installed both at home, and in a small library, and even in a copy center. Again, the key advantages of this unit are its compact size, ease of use, high level of reliability and minimal maintenance costs. It is based on this list that it is recommended to choose the multiplier in question.
The delivery list in this case includes:
- Canon FC-108.
- Instruction manual.
- Power cord
- Cartridge.
- Warranty card.
There are no questions to the earlier list. The manufacturer included in it everything that allows such a multiplying system to be assembled and started to be used for its intended purpose.
Key Specifications
The Canon FC-108 is based on laser technology. Its concept is that a “negative” of the output page is formed on the surface of the cartridge drum by means of an electromagnetic field and then the toner is distributed. After that, the drum is heated, and the applied black powder is “burned” into the page.
The resolution of the output documents is limited to only one value - 600 × 600. The speed of such an apparatus is only 4 sheets per minute. In this case, the first page will appear only after 22 seconds from the date of launch. The main media size is A4. But the density of the latter should be in the range from 50 to 128 g / m 2 .
The highest power consumption of this system can reach 600 watts. In standby mode, this value decreases to 1.4 watts.
Cartridge Models. Their parameters
The cartridge of the E-16 model is the main for Canon FC-108. Owner reviews, as well as technical parameters, indicate that a resource for displaying pages is enough for 2000 sheets. It is this cartridge that was included by the manufacturer in the initial delivery of this document management system.
But there is also its improved modification - E-30. In this case, the print limit at one gas station increases to 4000 pages. A component is not included in the delivery, and it is recommended to buy it separately.
Setup algorithm
A very simple assembly, connection and configuration procedure for the Canon FC-108 consists of the following steps:
- We extract the multiplier considered in the framework of this article from a cardboard, transport box. In addition, do not forget to remove all other components that the manufacturer included in the delivery list.
- After that, you need to choose the installation location of such a workflow system. It must satisfy the two most important conditions: to have a sufficient horizontal surface area and close proximity of the outlet.
- Next, you need to install the device and, according to the attached instructions, mount the loading and output trays. We connect the power cable.
- At the next stage, we lift the cover and install the complete cartridge.
- Then you need to turn on the device.
- At the final stage, we check the operability of this device. To do this, take any page with text, for example, and copy it. First, of course, you need to load blank sheets in the feed tray.
The results. Owner reviews. Actual value
The advantages of Canon FC-108 owners include:
- Compactness.
- Energy efficiency.
- Low price, which currently amounts to 2,000-2,500 rubles.
The disadvantages include only the low speed and mediocre quality of the output documentation. Such a photocopier is best used when creating copies of texts, tables, documents and graphs.