The gas distribution mechanism plays an important role in the fate of the car, and replaced on time, it will last a long, high-quality, present an opportunity to solve life problems on your favorite "swallow". For competent work, it is not necessary to contact specialists; you can do simple manipulations and replace the timing belt with a Fiat Albaa yourself. But first things first.
Important points
The camshaft and crankshaft need accurate positioning of their position, only then can we talk about the correct course of work. They must occupy exactly the same places as before the removal of the mechanism. Otherwise, the driver will only achieve a disturbed rhythm in the operation of the camshaft phases. According to the manufacturer’s recommendation, it is better to replace the Fiat Albea timing belt after 60 thousand km. The procedure should be accompanied by a change in the tension roller.
Time for Change - When to Change Timing
Each driver should know that regular inspection and visual independent control of all important mechanisms is required, while exercising belt control every 25 thousand km. Depreciation is characteristic of any spare part, and the apparent reasons listed below will help the motorist to understand that it is time to replace the timing belt with Fiat Albea:
- mohra along the edges indicates a fair amount of wear;
- the surface of the product was covered with oil stains;
- swelling and scuffing appeared.
If defects are neglected and ignored, if the timing belt is not replaced by Fiat Albea, the part inevitably awaits a deplorable fate - it will simply break off. What does this threaten? Valves will collide with pistons, because of their damage the motorist says goodbye to a large amount of money for expensive repairs.
The main causes of wear
Manufacturers of vehicles are not in vain to give recommendations and establish regulations - the car goes through many tests before being released to the automotive world market. Failure to comply with the rules of operation inevitably leads to breakdowns. Some of the most common are:
- aggressive driving style;
- poor quality road surface;
- poor climatic conditions.
For those who want to save time, you need to go to the auto repair shop. However, there is nothing complicated in replacing the timing with a Fiat Albea with your own hands. In addition, this will help to avoid unforeseen costs and gain technical experience.
Secrets of the procedure
First, consider the tools; success depends on its quality and the right choice. In the case you will need:
- hydraulic lift and key set;
- when replacing the timing belt "Fiat Albea" without a screwdriver, socket, round-nose pliers;
- replacement kit, tension pulley and rags.
Phased work sequence
The car rises with the participation of the jack, the right wheel is removed. This is the highlight at the start. Next, you will need to perform the following procedure:
- If you replace the timing with a Fiat Albea 1.4 with your own hands, you will have to remove the screws, remove the protection of the car.
- The generator belt is removed, while loosening the generator a bit.
- Unscrew the bolts of the GUR consumable (power steering), responsible for the transmission of rotations.
- Next, you will have to disassemble the power steering strap. Experts advise buying a kit with pulleys and rollers. Some people buy an uncomplicated belt with important parts.
- Call a neighbor or friend here. His "mission" is to put pressure on the brake at fourth speed. The owner of the vehicle at this time has to deal with the removal of the pulley. Do not forget to remove the cover in advance from the top of the mechanical assembly, then from the bottom.
- This step is extremely important! Remember, the labels when replacing the timing “Fiat Albea” - a responsible matter, requiring care, accuracy. The mark installed on the crankshaft facilitates the process, the task of the motorist is to correctly mark the second. It should be installed on the block.
- A mark is placed on the camshaft block, marks are made on the tooth and head.
- A further action is loosening the tensioner and removing the obsolete belt drive.
- Putting on a new belt, it is impossible to suppose offset of tags. The direction of the arrows on the belt is taken into account: they should look in the direction of movement. If you ignore this advice, the teeth will wear off very quickly.
Subsequent to the above actions will be followed by a crankshaft turn two turns to the right. Speed should not be included, and the roller should be tightened. Repeated grading will not harm the case at this point.
Check after changing timing
The car owner must make sure that the belt tension is good. The verification technique is carried out using a special device or without its use. Sometimes it’s enough just to push with your hand and understand the force of tension of the element. It is not worth pulling it too much, but sagging is not recommended. After that, the pulley returns to the place of the previous installation.
A test drive is a great way to test correctly performed techniques. If the replacement rules are misinterpreted, the machine will give a signal in the form of an indicator light. Suspicious noise - an alarming “bell” for the owner of a vehicle, indicating an illiterate installation. In the absence of "symptoms", you can be calm, confident in the correct installation. The reverse assembly order follows a strict sequence of work. For a clear understanding of the correctness of the judgment during the repair, it is worth driving several miles to make sure that the "steel horse" is in perfect order, allowing you to rejoice in kilometers of the path, as well as safely overcome them.