If you want to fix any detail of the interior and at the same time not use screws, a hammer and a drill, then you can use the liquid "Installation Moment" nails. The product has many advantages: excellent fixation, which provides high-quality adhesion of the composition to the surface, versatility, resistance to moisture, so it will work perfectly even in the bathroom. In addition, the adhesive is flexible and can hold most building materials together.
Liquid nails "Installation moment" can be used for internal and external works, as they are resistant to atmospheric influences. In addition, it can be used in a wide temperature range from -40 to + 80 degrees. The substance is odorless, although it may have a different shade depending on the variety.
Liquid nails "Moment Installation Superstrong" has a higher quality. Its only difference from other types of funds is a beige shade. It can be used for gluing decorative elements on any surface inside the house and from the outside. And the substance is able to firmly fix the door frame in the opening, window sills, skirting boards, platbands, ceramic plates, wood and other materials. The elements can have large sizes.
Liquid nails "Installation moment" are very simple in application. However, there are several nuances that are useful for the user to know. First of all, to apply the composition to the surface, a special gun should be used, without which no one can squeeze the glue from the tube. The cost of the mechanism is low, especially since it can be purchased at any hardware store. Installing a cylinder in such a gun is very simple.
Liquid nails "Installation moment" easily open. To do this, cut off the plastic seal on the lid and unscrew it. If you purchased the product in a metal can, then you will have to pierce the protection with an additional nail. Apply the substance on a clean and dry surface. In order for the element to adhere well, the base should be primed. After the surfaces have completely dried, glue must be applied to one of them. If the product is small, it is best to squeeze a solid line of substance onto it. Otherwise, you can apply the spot method of application.
After the adhesive "Liquid Nails Instant Installation" is already on the product, it should be leaned tightly against the base base and held for about 5 minutes. In this case, the element can be easily tapped with a fist. In this way, you will have a stronger hold.
If the product got on the fine finish or the product itself to be glued, you should not remove it until it dries, as otherwise you will simply smear the composition on the surface and make it dirty. The dried substance should be very carefully and precisely cut with a sharp knife or blade soaked in water. That's all the features of the liquid nails presented. Good luck