Those building materials that allow solving several problems at once are the most valuable. Among them, it is worth highlighting the insulation “Basvul”, the price of which (from 215 rubles per package) is acceptable for the average user, which makes it quite common in the domestic market. It has excellent qualities, perfectly passes steam through itself and is characterized by fire resistance. The constructions protected by them gain noise and heat insulation properties, in addition, their service life is extended, and what more could the owner of a future or already built house wish for?
general description
Basalt cotton wool, which is represented by the Basvul company, has many advantages, it is thanks to them that the material has gained popularity among consumers, despite the fact that its cost to some consumers may seem somewhat overstated. It weighs a little, so one person will be able to cope with styling. The vapor permeability is high, which makes it possible to achieve a comfortable indoor climate for humans. The material is environmentally friendly, and its life is unlimited. Shrinkage is minimal, during the entire time of use, the dimensions and performance of basalt wool do not change. It should be noted also hygroscopicity. This thermal insulation is non-combustible. And since it meets all safety standards, it can be used as fire protection in the respective fences. Having examined the range of the company, you can find a heater whose qualities are right for you.
Specifications
"Basvul" can be used to isolate roofs, walls and floors, interfloor ceilings can be attributed here . The material is effective in private and industrial construction. It is made of molten rock - basalt, which is exposed to high temperatures during the production process. Thanks to this technology, the insulation has received exceptional characteristics. The weight of the heat insulator varies, depending on the variety, from 25 to 225 kg / m 3 . Thermal conductivity - not higher than 0.038 Watt / m * K. Plates have standard sizes: 600x1200x30-200 mm. Moisture absorption - not more than 1% of the total weight and 2% - of the volume. If you are interested in the products of the company "Basvul", you can buy a heater, because it has a high vapor permeability, which is 0.3 mg / (h * m * Pa).
Varieties of thermal insulation: "Basvul Ruf"
"Basvul" - insulation, the characteristics of which are presented in the article, is offered for sale in the form of "Basvul Ruf." According to customers, this thermal insulation is used in the arrangement of steep or flat roofs. The thickness of the sheets can vary from 5 to 16 cm, while the density varies from 40 to 170 kg / m 3 . Consumers emphasize that thermal conductivity, depending on temperature, can reach 0.04 W / m · K. Water absorption by volume in this species does not exceed 1.5%. You may also be interested in strength, which is kept at 50 kPa. There are two varieties of this thermal insulation: the first is used to equip the lower, the second - the upper double layer.
Reviews on the Baswell Standard Material
Basvul insulation, reviews of which should be read before visiting the store, is also offered in the Basvul Standard version. It is intended for thermal insulation of walls from small-piece materials. This variety is also used when warming industrial and office buildings, as well as frame structures with different finishes, including those presented by siding. Its thickness may be 3-20 cm, while the density varies from 50 to 70 kg / m 3 . Vapor permeability can reach 3%, compressibility - less than 10%.
Description of Basvool Flor
This insulation "Basvul", the technical characteristics of which will be presented below, is intended for sound and thermal insulation of different types of floors in residential buildings. They can be heated, set up on the ground or by floating technology. Sometimes floors are laid directly on thermal insulation. Its density varies from 100 to 120 kg / m 3 , the minimum thickness is 5 cm. The maximum thickness of the plates is 15 cm. One of the outstanding characteristics is the compressive strength, it is 25 kPa.
Characteristics of the material “Basvul Fasad”
Increasingly, consumers have recently opted for Basvul products. Insulation for the facade can be used for thermal insulation of external walls, on which decorative plasters are subsequently applied. Standard sheets are limited to a thickness of 4 to 16 cm, and the density varies from 135–175 kg / m 3 . Compressive strength is equivalent to 45 kPa, water absorption is minimal and does not reach 1%. The content of organic substances is less than 4.5%. For the reason that the material is not combustible, it can be used in reconstructed or new industrial and civil facilities.
Styling Features: Preparation
Insulation "Basvul Fasad" will be an excellent solution for thermal insulation of external walls. Before starting work, the following materials and tools have to be prepared:
- insulation;
- Reiki
- construction nails;
- grinding grater;
- polyurethane foam;
- hammer.
Cracks and crevices are removed from the surface, for which purpose use foam, which is sometimes replaced by tow and felt. The last two options are cheaper.
Waterproofing technology
Basalt insulation "Basvul" should be laid on a previously prepared surface. To do this, it is covered with a layer of vapor barrier, which protects the insulation from the negative effects of moisture condensing on the inner surface. If work is carried out in the field of the roof, then between the cotton and the covering material it is necessary to place a vapor barrier layer, which is represented by a special film or membrane. A vapor barrier material may be foil, which is sometimes replaced with a conventional plastic film. For mounting, use staples of a building stapler or double-sided tape, which additionally seals the joints. When insulating the roof of a frame house, the waterproofing must be located under the roof. This will prevent the penetration of moisture and steam that form on the roof surface.
Insulation technology
The process should continue with the installation of a fence made of metal. Its fastening is made to the wall using dowels. The fastening of the plates can be carried out using polymer-cement glue, which will ensure high-quality fixation. The composition is distributed on the surface of the plate in a uniform layer, and after that the material must be pressed tightly against the wall structure. It is necessary to advance, going from bottom to top and from right to left. Initially, solid sheets should be fastened, and then the cut pieces are installed in small areas.
Reviews on quality and performance
Having visited the store, in a large assortment you can find the products of the company "Basvul". The insulation of this manufacturer is distinguished by excellent quality characteristics. All consumers who used 5-centimeter slabs for thermal insulation of the attic were able to feel the effect at the first cooling. Installation work can be completed in a few days, which will depend on your skills.
According to users, after warming the attic, you can use it all year round, and the noise from the rain becomes almost inaudible. If you are the owner of a one-story private or country house, then at any time you can think about building a second floor, which, of course, will require insulation. Home craftsmen advise choosing mineral wool, with which you can protect the external walls. In this case, it is best to use 10-centimeter plates, which are stacked in two layers in a checkerboard pattern. As practice shows, in winter it will be warm even in the most severe colds.
Conclusion
When warming any part of your home, you can use products under the Basvul brand. The insulation of this company, although it costs more than some analogues, but justifies the price in the first year of use. If you do not want the foam layer of thermal insulation to be attacked by rodents, then it is best to use basalt cotton wool, to which pests are completely indifferent.