This material will describe in stages not only how to connect the D-Link DIR-300 router to a local network, but also how to configure it correctly. A methodology for checking both the wireless part of the computer network and its wired segment will also be presented. All this will allow even a novice computer specialist using such a router to access the Internet from any personal computer or mobile device.
Advantages and disadvantages of this router model
The following points are among the advantages for a network device such as the D-Link DIR-300 router:
- The firmware of the router functions stably and without problems.
- Low cost (up to 2000 rubles).
- Excellent functionality, which is more than enough to create any small computer network for your home or office.
- Adequate equipment so that immediately after the purchase you can configure it and start using it immediately.
- Easy setup and use.
- High degree of reliability, which is characteristic of any device with the D-Link logo.
But the minuses of this network device can be attributed only one point - support for wireless standards for transmitting information 802.11 versions b and g. More recent versions - n and ac - are not in this case. The network device itself was released a long time ago, and at the time its sales began, only 802.11g was relevant. As a result, the developers limited themselves to this version only.
Characteristics
This model boasts the following technical specifications:
- 4 RJ-45 ports for creating a wired network segment (they are colored yellow around the perimeter and are designated as LAN X, where X is the port number from 1 to 4).
- 1 input port for connecting the input wire from the provider (on the edge it is painted in blue and signed as INTERNET).
- 1 removable antenna with 5dB gain.
- The operating frequency is 2.4 GHz.
- The maximum data transfer rate is 54 Mbps.
- The supply voltage is 5 A, the current is 1.2 A.
- Power consumption - 4 watts.
Equipment
Before connecting the D-Link DIR-300 router and setting it up, we will deal with the package contents of this network device. It includes the following:
- The router itself.
- User's manual.
- Mounting system for mounting the router on a wall or in a vertical position on any horizontal surface.
- Power supply with output parameters 5 V and 1.2 A.
- Meter twisted pair with crimped connectors.
- A CD with an electronic version of the documentation and the necessary application software.
- Warranty card.
Installation location
The fixed installation site plays an important role in the quality of coverage provided by the D-Link DIR-300 router. Reviews indicate that it should be as close to the center of the room as possible. In this case, the presence of various metal surfaces nearby that will “dampen” the signal is not allowed. Also, in the place of the router there should be a stationary outlet for organizing power supply to the network device. Another important component in this case is the ability to seamlessly route the input crimped twisted pair cable from the provider. Based on the previously listed conditions, we choose the location of the router in the office, apartment or house.
First connection and setup
The easiest way is to set software configuration parameters on a time basis for any router. It is precisely by such an algorithm that this article will describe how to configure the D-Link DIR-300 router. Connection in this case is performed according to a temporary scheme. The input wire from the provider is not needed at the setup stage, and the router itself can be installed in any place convenient for this. That is, next to the PC system unit or laptop and a free outlet. After installing the router, we connect the power supply to the outlet, and the wire from it to the corresponding socket on the network device. We install a complete twisted-pair meter with one end in any yellow free RJ-45 port, and the other in the PC network card connector.
Next, apply voltage to the router and wait for the download to finish (30-60 seconds). After that, we launch any browser available on the computer and in its address bar we type 192.168.0.1. At the next stage, press Enter. Then, in the query window, enter the username and password. In this case, they are the same - admin. After filling in the fields, click on the Log In button. In response, the basic window for configuring the router opens. Then go to the menu item Internet Setup (located in the upper right corner). In the future, select the Wizard settings item. Then the software setup consists of the following steps:
- We set the type of connection to the equipment of the provider (PPPoE, DHCP, L2TP, PPTP or Static IP). This information is provided by the provider in the service contract. After setting the necessary flag, click on the “Next” button.
- We specify the connection parameters (username, password, type of network address, in the case of a static addressing method, enter the necessary values). This information is also provided by the provider. We fill in only the indicated values, and do not touch the rest.
- The next step is to enter the name of the wireless network and password to connect to it.
- For security reasons, we change the standard password for access to the parameters of the router and confirm it.
- Then indicate your time zone.
- Save the changes.
Turn off the router and disassemble the temporary circuit.
Permanent transfer
The next step is to move the router to a permanent location. Next, we will figure out how to connect a D-Link DIR-300 WiFi router in a permanent way. We connect the input wire from the provider to the blue port, next to which is the inscription INTERNET. All network devices that will be connected using twisted pair are connected to the yellow ports using the wire previously connected to this place. The power supply is installed in a stationary outlet, and the wire from it is connected to the socket of the router. Next, turn on the toggle switch on the back of the network device and wait until it finishes loading. It takes from 30 seconds to 1 minute. After that, we proceed to verify the operation of the router.
Testing
After all the previously described, it is necessary to verify the correct operation of the network equipment. To do this, you must launch a browser on any connected PC and enter an address in its address bar, for example, google.ru. Then press Enter. In response, the start page of the search giant should appear. If this does not happen, then go to the network connection settings in the PC and check their correctness. Everything must be configured so that the computer receives the network address and DNS automatically.
Now we will figure out how to connect the D-Link DIR-300 router and any mobile gadget (smartphone or tablet) using Wi-Fi technology. To do this, go to it in the "Settings" menu. Select "Wireless Networks" and then Wi-Fi. We turn on this transmitter and begin the search for all available wireless networks. Then select the name that was set in the previous step. Then enter the password to connect to the wireless network. At the next stage, close the settings window and launch any of the available browsers and similarly check the network performance.
Summary
This article describes not only how to connect the D-Link DIR-300 router to a computer network, but also how to configure it properly and test the transmission of information. The algorithm for setting it up is very simple, and it is affordable for any user.