The HP LaserJet 1010 printer will be considered in this article. Its main technical characteristics will be given. The procedure for setting up such a printing system will also be examined in detail.
Main settings
The HP LaserJet 1010 printer is based on the laser printing method. Therefore, it is characterized by high speed and profitability. But the quality of the output documentation in this case leaves much to be desired. Its resolution is only 600 x 600. The main page size for such a peripheral device is A4, and the paper density can be from 60 to 110 g / m 2 .
The number of interfaces is limited to only one wired USB port in version 2.0. The HP LaserJet 1010 printer is capable of outputting up to 12 A4 sheets per minute. In standby mode, this technique consumes no more than 7 watts, and during operation this parameter increases to 214 watts. At the same time, its noise level does not exceed 48 dB.
General procedure for setting up a printing system
In order to connect and install the HP LaserJet 1010 printer, you must perform the following manipulations:
- At the first stage, it is necessary to get it from the cardboard packaging along with the rest of the delivery elements.
- Next, you need to install this printing system on a computer table. At the same time, the length of the computer wire with which the switching to the PC will be implemented must have a certain margin. That is, it is not allowed to connect “in a stretch”.
- The next important step is lifting the cover and installing the cartridge.
- Then you need to connect the power cable to organize the power supply of the printing subsystem.
- After that, you should turn on all the components of the computer system and the printer.
- When the PC download finishes, you need to install the driver from the CD. But it is necessary to take into account the fact that such application software is available only for Windows Vista or earlier versions of operating systems of this family. If Windows 7 or later is installed on the PC, then it is necessary to additionally follow the recommendations that will be given in the next two paragraphs.
- At the final stage, we reboot the PC. After its end, we display a copy of the test page.
Possible problems with Windows 7
A long time ago, by the standards of the computer industry, the HP Laserjet 1010 printer was released. Official drivers were not released for Windows 7 and later versions of system software. But here the peripheral solution in question has a high degree of reliability and continues to be actively used in various offices.
In this case, the hardware of the PC is often updated. This leads to the installation of a new version of the operating system. Then the printing device stops working. In this case, when combined with Windows 7/8 / 8.1, it is recommended to download the driver for the same printer from the manufacturer’s official website, but for Windows Vista and install them. If such a manipulation did not solve the problem, then you must then perform the following actions:
- We open the Start menu using the button of the same name.
- Select the sub-item “Control Panel” in it.
- In it you need to open the item “Printers”.
- Then we start the “Add Printer” operation.
- In the next window, set the connection port DOT4_001.
- We install the drivers from the HP LaserJet 3055 printer (they are compatible with the hero of this review).
After that, the device can be used to display documentation.
Nuances when connecting to Windows 10
The HP Laserjet 1010 Printer for Windows 10 also does not have official drivers. But here the system itself, as a rule, selects the most optimal control software from the built-in set. Therefore, in most cases, with such system software, there is no need to install additional drivers. If this does not happen, then you can perform the same sequence of steps given in the paragraph earlier. In this case, it is necessary to exclude the stage of installing drivers for Windows Vista.
Reviews and conclusion
Devices such as the HP LaserJet 1010 printer are still actively used in offices. At the same time, they were released very, very long ago. Therefore, the owners of such solutions focus on their increased reliability. They are also quite easy to use, and the cost of their maintenance is minimized.
In essence, they have no serious drawbacks. Therefore, for a long time such printing systems will be actively operated. But at the same time, it is already impossible to find them in free sale. They are discontinued, and stocks, of course, are sold out.