Printers are now available not only in offices, but also in many private homes. This technique needs to be refueled periodically in order to be able to create printed documents. Therefore, it is important to know how to insert the cartridge into the printer. The procedure is simple, just follow a few steps.
Rules of Procedure
Depending on the type of technology, the process for inserting a cartridge may vary. A common printer is HP. It is easy to manage and build. How to insert a cartridge into an HP Laserjet printer? The cartridge is located in a box. It is advisable to remove it before installation, since exposure to air will adversely affect the technique.
Gently shake the new block. This action is required because it could be stored for a long time. This is due to the fact that the fine powder inside is caking. The device is held horizontally and shaken 3-4 times. The print head is covered with foil. It is located at the bottom of the part, removed carefully. In order not to get your hands dirty, you should take on the colored label.
Where to insert the cartridge into the printer? The block fits in the place where the old cartridge was. Usually, a cover opens at the top of the device, where the printing device fits. The cartridge must be fixed, which is done using a stop mechanism or a latch. Confirmation of the insertion is considered a click. Do not press hard on the tool so as not to damage it.
Recommendations
The used cartridge must be placed in a bag and disposed of separately from household waste. Then insert a new cartridge. Shaking must be performed with any kind of technique.
How to insert a cartridge into the printer to do this the first time? The part is mounted on guide rails. The device must be carefully moved into the equipment. A correctly placed part becomes loose. After clicking, you can close the front cover.
How to insert a cartridge into a Brother printer? This procedure is the same as with other devices. You must open the cover where the unit is inserted, and then gently install it until it clicks. At the end you need to close the lid.
Verification after installation
How to insert a cartridge into the printer so that the device functions correctly? To do this, check its performance. When the lid is closed, the equipment is automatically detected. On the computer screen there will be a message about the need to print a test page. It is necessary to confirm this action.
If there is no such function, turn on printing yourself. Do not forget to insert blank paper, otherwise there will be an error notification. Before printing, the settings in the printer are usually checked, after which a test page is printed.
If the picture matches, the procedure is performed correctly. If streaks or problems are found, a thorough cleaning should be performed. You probably need to align the printheads. These procedures are performed in the printer control panel. Each device has a menu, so details can be found in the instructions. It usually also indicates how to insert a cartridge into the printer? It is necessary to adhere to the manufacturer's instructions in order to prevent damage to the equipment.
Likely difficulties
Printers are black and white and color. The latter have only a few colors that mix to produce different tones. The difficulty is that if you confuse the colors, the device will not perform the correct mixing of colors when printing. Pay attention to the color sticker during installation.
It should be on the cartridge and in the seat of the printing equipment. It turns out that the block with the green sticker is installed where there is a sticker of the same color. If there are difficulties, for example, the device is not fully inserted, it is possible that it does not fit on the side that is required.
How do I determine if a cartridge replacement is required?
The cartridge is usually pulled out when refueling is required. Insert it after performing this procedure. There are signs when you need to replace a cartridge :
- The print becomes faded, its former saturation is lost.
- Not the whole sheet is printed, some letters may be lost, the effect of "unprinted corners" is observed.
- The display will indicate “Replace cartridge.”
- The effect of "light stripes".
There are 2 types of cartridges - chip and non-chip. The former are considered expensive to maintain, as well as technological. For example, this device notifies the owner of the need to replace the ink unit. Non-studded devices are usually used with budget equipment. Then you need to independently calculate the resource of the device.
Cartridges must be refilled regularly to prevent them from drying out. Inserting these devices is very simple. It is enough to do a try once, then in the future there will be no difficulties.