Many home masters believe that the lining acts as the best material for decorating the walls of the bath. It can be made of PVC or wood. The first variety is permissible to use for the dressing room or rest room, while the other is more universal, it can be installed in the room for any purpose. With it, you can not only decorate, but also insulate the walls, as well as isolate them from noise. Externally, the products are long wide panels that have grooves on the sides to connect to each other. The design allows you to fix the finish on one side with brackets and screws, while such fasteners will be invisible to the eye. Among other things, due to its excellent appearance, the lining does not need additional decoration.
Types of lining
Before sheathe the bath inside the lining with their own hands, it is recommended to choose the material that will underlie. As mentioned above, it can be plastic or wood. The first variety of products is made by extruding polyvinyl chloride resin and additives. The materials used in the production are environmentally friendly and fireproof, however, such a lining cannot be installed in the steam room.
Wooden lining
If you are faced with the task of how to sheathe a bath inside a clapboard with your own hands, you should initially think about the type of material used in the work. You can buy a wooden lining, with which you can make breathable walls that create a natural microclimate in the rooms. When the temperature rises, the wood will emit a pleasant smell. The following wood species are used in the manufacturing process: aspen, spruce, pine, cedar and beech.
Before sheathe the bath inside the clapboard with your own hands, the instructions for you should be studied. From it you can understand that the wooden variety of material belongs to one of four quality classes. Extra-class, for example, is an ideal lining, which is devoid of knots and other errors. Whereas the most inexpensive class - C, may contain captive knots, as well as resin bags or through holes.
Classification of wooden lining
Many consumers, when deciding on how to sheathe a bath inside a clapboard with their own hands, prefer its wooden variety. However, here you will have to make a choice in the direction of the usual profile or eurolining. In the first case, the longitudinal chamfer is removed from the products. In the production process, natural moisture wood is used, the level of which does not exceed 25%. As for the thickness, it reaches 20 mm. The surface of the panel may be rough. Euro lining is also for sale, which is of high quality and provides a unique connection system. On the back side there are ventilation openings, due to which condensation does not form. Before sheathe the bath inside the clapboard with her own hands, the photo should be considered, perhaps this will allow you to make a choice. If we are talking about euro lining, then it, in turn, is divided into: standard, land house, block house, American and soft-line. The most widespread among consumers was the block house, the front side of which is made in imitation of a rounded log.
Installation of the crate
If you are thinking about how to sew a bathhouse inside the clapboard with your own hands, step-by-step instructions should be read by you. This is the only way you can eliminate errors. According to technology, initially the wall is prepared by installing the lathing, for which you should use wooden bars with a cross section of 20x50 millimeters. The blanks are cut so that some of them have a length of 500 millimeters, and the other 1000 millimeters. This is necessary in order for the elements to be able to be fixed apart. Many home masters think about how to sheathe a bath inside a clapboard with their own hands, step-by-step instructions help them in this. It describes the technology in detail and provides for the installation of metal suspensions, the step between which should be 40 centimeters.
Methods of mounting a lining
To fix the lining to the wall, it will initially be necessary to equip the frame system, which consists of bars that are fixed in a vertical or horizontal position. In rare cases, these elements are installed diagonally. However, resorting to this technology is recommended only if you have professional knowledge and skills. The basic rule is the location of the bars, which should be oriented perpendicular to the planks of the lining. If you are thinking about how to sew a bathhouse inside the lining with your own hands, it is recommended that you read the tips presented in the article. From them you can learn that the frame bars should not be fixed butt to wall. Between the edges of the workpieces and the surface should leave a distance in the range of 3 to 5 centimeters.
Vertically, the elements should be 5 centimeters apart. Under the lining, there must be a distance for ventilation. In order to prevent damping of the lower part of the wall during operation, it is necessary to apply a waterproof putty on the surface of the walls before fixing the first rows of the bars. Along the door and window openings, it is necessary to install bars that will extend beyond the doors and windows on both sides. Wooden blocks for installing the lining should be mounted on the wall using pins or screws that are made in advance. This is required in order not to make two holes in the wall.
Thinking about the question of how to sheathe a bath inside a clapboard with their own hands, consumers are trying to read the advice of the masters. From them you can understand that installation work can be carried out using different technologies, depending on the fasteners used. If the strips will be attached to the frame using nails, the fasteners should be installed obliquely, nailing it from the side of the tongue. If it is supposed to use clips, then they are nailed from the groove.
Lining with an offset profile needs an internal latch, which is fastened with nails, paper clips or clips. A profile is not required to be deployed. There is no need to change anything in the connection, each lined board will cover the previous mount.
It is necessary to start work from one angle. Wooden lining is sometimes fastened with furniture nails with small hats, which are complemented by self-tapping screws for reliability. To fix the plastic lining to the frame system, it is necessary to use a construction stapler, and the brackets are installed in the grooves. If you want to create a surface that will look as aesthetically pleasing and neat as possible, you can use a secret method of attachment. To do this, a hole is made in the board from the spike side, into which a screw is installed during installation. The self-tapping head can be closed with a dowel.
At the last stage
Now you should understand how to sheathe the bath inside the clapboard with your own hands, it is important to take into account the fact that after the work is completed, the protruding parts are cut off and the surface is ground. It is important to remember that fastening can be carried out using a stapler, while the bracket is installed in the groove so as not to interfere with the spike of the next panel.
Using Kleimers
Kleimers are metal staples that are designed for thin lining with low weight. On the back wall of the groove you will need to fix the brackets. The upper section of the first panel is strengthened with a self-tapping screw, the cap of which is covered with a dowel. Kleimers are installed on the wall with nails or self-tapping screws, and each subsequent board is connected to the previous one, which is already installed on the wall. The final element can be fixed, like the first: with the help of a closed dowel.
Methodology
If before the repair you thought about how to sew a bath inside the lining with your own hands, it is recommended to consider the types of this material beforehand. Information about this was presented above. So, if you decide to purchase thin panels, then they can be fixed with clips. If necessary, the canvases are removed and installed in another place, this is the advantage of this technology. You can start work from the left or right side of the wall, as it will be convenient. The first product should be cut to 1/3 and set in a corner, backing 5 millimeters from the surface of the ceiling. At intersections with vertical bars, the plank is nailed, which should be located as close to the corner as possible. The other side of the bar is fixed on a vertical bar into the notch of the clips and secured with a paper clip.
Conclusion
In order to achieve a strong fastening between the boards, you need to use a wedge, on which the master taps with a hammer. After clutching, the boards can be joined with clips.