Clever Geek Handbook

Configuring the ASUS WL-520GC router. Execution order

As part of this review material, the ASUS WL-520GC model router will be presented. Setting up the router, its technical characteristics, relevance, cost and owner feedback about this network gateway - all this will be discussed in our article. Also, approximate parameters of the program shell will be given, which must be installed during its configuration.

asus wl 520gc router setup

Router Positioning. Its equipment

The segment of the most budget network devices includes ASUS WL-520GC. Setting up the router is a very simple task. The main scope that the hero of this review is aimed at is home computing networks. Also, such a solution can be applied in a computer club or office. But, again, the network should be small and consist of 4-5 computers.

The configuration of the device in question includes the following elements:

  1. Router
  2. A disk with a quick setup wizard, documentation and other related software.
  3. User's manual.
  4. Power adapter.
  5. Twisted pair, which is intended for the initial setup of a network gateway.
  6. Warranty card.

Key device parameters

The ASUS WL-520GC has quite good technical specifications. Setting up the router can be done in two ways: using the setup wizard and using the web-based interface. The technical specifications of the network solution in question indicate the following characteristics:

  • One antenna for creating a Wi-Fi network, which allows you to exchange information at speeds up to 125 Mbps.
  • Four ports with a declared speed of up to 100 Mbps.
  • One WAN input connector. Its maximum speed can be all the same 100 Mbps.

At the software level, features such as IPTV and firewall are supported.

setting up the asus wl 520gc router

The first step in setting up a network gateway: switching

Setting up the ASUS WL-520GC router begins with installing all the connections necessary for its normal operation. At this stage, it is necessary to perform the following manipulations:

  1. You must select the installation location of the router. It should be located as close as possible to the center of the room. It is also not allowed to find metal plates nearby that will dampen the Wi-Fi signal. Another key condition in this case is the possibility of supplying wires from the provider company and the power system outlet to this place.
  2. We connect the AC adapter to the outlet, and the wire that goes from it to the socket on the network gateway.
  3. Twisted pair from the provider to the connector labeled WAN.
  4. If necessary, then we further implement the wired part of the created computer network. To do this, we connect a twisted-pair crimped pair with connectors to the router (LAN1 - LAN4 ports) on one side. And the other side - to the RJ-45 connector of the devices of the computer network.
  5. At the final stage of the connection, you need to look at the sticker on the device’s case, which shows the name of the SSID network and, of course, the password for connecting to it.

Second step: shell configuration

Now you can turn on the router and other network components. Then you must, without fail, wait until the network gateway and any connected computer or router have finished loading. Then, on a PC or smartphone, we start the procedure for searching for available wireless networks. Again, the computing device should be equipped with a Wi-Fi standard wireless transmitter. The next step is to connect to the network whose name is indicated on the gateway enclosure. In this case, you need to enter the appropriate password indicated on the same sticker.

After establishing the connection, launch the browser. In it, enter the address of this network solution 192.168.1.1. Then, to enter the settings interface, in the "Login" and "Password" fields, type the word "admin". In the menu that opens, you must specify the connection parameters to the equipment of the provider. Values ​​for wired and wireless network segments can be left at default.

For example, setting up the ASUS WL-520GC router to Beeline requires setting these values:

  • Go to the IPConfig item in the configuration menu. Next, move to the WAN sub-item.
  • Type of connection PPPoE or L2TP. This information is specified in the service contract.
  • The address in this case is obtained automatically. Similarly, DNS is defined.
  • The login and password, as well as the type of connection, must be specified in the contract and set.
  • Mandatory save the changes.

setting up the asus wl 520gc router to a beeline

Parameter adjustment for IPTV

Now you need to start the final stage of configuring the ASUS WL-520GC SS router. An IPTV connection is configured only when the corresponding set-top box is included in the network. This procedure consists of the following actions:

  1. We enter the setup menu using the previously described method.
  2. We move to the menu item "Local Area Network".
  3. Here you need to specify the port to which the set-top box is connected, for example, LAN1.
  4. Save the changed parameters.

The relevance of such a network gateway at the moment. Reviews and its cost

Alas, the WL-520GC network router was released a long time ago and is currently outdated. In the new state, it is already impossible to buy it. Formerly such devices can be purchased for 600 rubles.

The advantages of this solution include a very simple algorithm for setting up the ASUS WL-520GC router, its reliability and acceptable functionality. Also, his cost is quite democratic. He has only one minus - it is outdated technical specifications and the lack of support from the manufacturer.

configure asus wl 520gc ss iptv router

Finally

In this article, the ASUS WL-520GC model router was examined in detail. Setting up a router is a very simple operation. And everyone can cope with it. Such a device is most optimally used at home or in a small office. Both in the first case and in the second technical parameters of the considered solution will be quite enough to create a small computer network.

More articles:


All Articles