This article will discuss the CanoScan LiDE 25 scanner. Consider what it is sold with, how to configure and install it, and what features it has.
Contents of delivery
The scanner comes with a quick start guide. All functions and features of the device are described here. Also in the kit you can find a CD that allows you to install the program for easy use of the scanner. There is a USB interface cable and stand. It makes it possible to work with the device.
Characteristics
The described scanner is a tablet. It has a special color sensor that allows the process of reading information. The CanoScan LiDE 25 uses a three-color LED as a light source. There is an optical resolution: 1200 by 2400 points. If we talk about the program indicator, then it ranges from 25 to 19,200 pixels.
Next, it is necessary to say about the scanning capacity. This device is color and black and white. If we talk about the first functional mode, then at the input, the bit capacity is 16 bits, at the output - 8 for each shade. The same indicator with monochrome operation. The scanning speed in color mode will be about 16 ms per line, if the process is carried out with a quality of 600 points. If we are talking about 1200, then it takes 32 ms. If the process occurs in black and white, then these figures are slightly reduced. With low resolution, scanning takes about 5 milliseconds per line, with high quality - up to 10 ms. The pre-processing speed is 16 seconds.
CanoScan LiDE 25 has USB version 1.1 installed. The maximum document format is Letter or A4.
There are three buttons on the scanner. These are “Copy,” “Scan,” and “Send to Email.” You can use the device at temperatures from 5 to 35 ° C. Also, the device will function well with humidity from 10% to 90%. Power must be supplied via the USB port. Accordingly, an external unit is not installed here.
Power consumption during operation is 2.5 watts, in idle mode 1.4. If we talk about the dimensions, they reach 25 × 38 × 3 cm. The device weighs approximately 2.5 kg.
Installation Nuances
When working with the CanoScan LiDE 25 scanner, you need to pay attention to some nuances. Before you start operating, you must install the software. It is available on the CD. Typically, when you insert into the drive, the download starts automatically. If not, you should run it yourself. Next, you just need to click on the “Install” button in a special window a few times. Then you need to follow the prompts on the screen. Then the message “Download completed successfully” appears. You can get to work.
CanoScan LiDE 25 also has a feature such as a scan engine lock. In order to remove it, it is necessary to move the switch, which is on the device, in the opposite direction. It should be noted: you cannot tilt the scanner more than 90 degrees. To work with the equipment, you must connect it to the computer using USB.