This tractor was produced at the Lipetsk plant. He was born thanks to a modification of the previous model, which had the T-40 index. It was she who became the base for the new LTZ-55 equipment. These machines took all the best from their predecessors and fully complied with modern requirements at that time. The tractor is designed for a wide variety of field work that can be done using attachments. This versatile cultivating "hard worker" was often used for work with row crops.
All attachments were divided into several types.
So, there were trailed, semi-mounted systems that could work independently, without the help of tractor organs. Attachments were also distinguished, which could interact with some parts of the machine. The LTZ-55 tractor helped a lot to carry out various works, and was also used to transport various cargoes, was used in loading or unloading operations.
Modifications
The factory produced several modifications. Among them, several interesting models can be distinguished. This is an all-wheel drive version with an index of 55A, a model with lowered clearance, a modification with low clearance and all-wheel drive called 55AN. There is also a tractor designed for places where minimal ground pressure is needed.
The Lipetsk plant also produced export versions of the machine. They were a convertible layout.
LTZ-55: technical specifications
This agricultural machine was 3,750 m long, its width was 1,710 mm, and the tractor reached 2,560 mm in height. The gross weight was 2900 kg, and the clearance for the base model was 50 mm. The wheelbase was 2145 mm.
As the power unit used D-144, which allowed to gain up to 30 km / h with its power of 50 hp The fuel consumption of this tractor was 249 g of diesel per 1 kW / h. The fuel tank had a volume of 70 liters.
Cabin
The cabin is made according to all the most technologically advanced standards at that time. The workplace is fully compliant. The cabin is completely tight. This protects the tractor driver from moisture, dirt and dust.
This makes it possible to work in any conditions. In addition, inside the worker can feel comfortable - soundproofing, as well as vibration protection are made at the highest level. Be sure to pay attention to the LTZ-55. Photos, of course, do not allow to appreciate all the beauty and adaptability of the machine, but they are worth a look. You can see them in the article.
Additionally installed heating and ventilation system. The heater maintains a comfortable temperature, and not just heats the air. Among the advantages can be noted the glazing area, which is quite large. This has the best effect on ease of use. The operator sits in a comfortable chair, which has adjustments for height and weight.
Engine
LTZ-55 is equipped with a D-144 diesel engine. The volume of the unit is 4.15 liters. It was made at the Vladimir plant, where they produce motors for tractors. There are 4 cylinders in this motor. They are arranged in rows and vertically.
The motor has proven to be extremely reliable, safe and at the same time high quality. This model was significantly different from everything that was put on agricultural machinery before. Advanced technologies have made the unit not only powerful, but also economical. With regard to environmental friendliness, here, too, everything has been done very well. The engine emits harmful substances in minimal quantities.
Transmission
This is the main working body of LTZ-55. The gearbox had 8 gears, as well as a reverse.
Also, the transmission was distinguished by the presence of a friction clutch and a single-plate clutch.
Chassis
The tractor is equipped with two types of suspension. This is a rigid system on the front wheels and a spring suspension at the rear.
The brake system is represented by tape and parking brakes. But that's not all. Also, as an option, you can purchase a tape-disk brake system, hydrostatic control, parking brake, which has a secondary shaft, gearbox for 7 gears with a travel reduction system.
Spare parts
Someday even the most reliable equipment wears out.
Then the owners are faced with the task of repair. But in order to be able to repair the car, spare parts are needed. The characteristics of the LTZ-55 tractor make it easy to find all the necessary components. On the modern market there are a huge number of a variety of spare parts for agricultural machinery: both completely new and used. Therefore, there are no problems with this.
Among the large number of spare parts for this tractor there are parts for any group of equipment. You can replace worn motor parts, transmissions, electrical equipment.
How much does a tractor cost?
Prices for these models of agricultural machines are different. It all depends on the state of a particular machine. If you call the average figure, the new tractor will cost the buyer 1 million rubles. However, if you purchase equipment in bulk, you can get a significant discount. Used vehicles are always a risk, so you should think a hundred times.
The first and main condition for the purchase of used equipment is the recent major repairs. Such machines have the highest cost among used offers. Then you should pay attention to the number of hours. Also, when buying, the condition of individual components and mechanisms is carefully checked. The price is determined depending on how much wear and tear on the machine. And the last factor that can somehow affect the price is appearance.
Advantages and disadvantages
For 20 years of production of the LTZ-55, the characteristics of this tractor fell in love with many farmers. The car has earned positive reviews due to its features. So, they highlight the wide possibilities that allow working with a huge set of all kinds of additional equipment.
The model has a relatively light weight and fairly compact size.
Moreover, the power is very substantial. This is a great opportunity to work where speed and accuracy are needed. At the same time, ground pressure is the lowest. The tractor has high maneuverability and quite maneuverable, which is not in similar solutions from other manufacturers.
In this technique, due to the presence of heating in the cab, you can perform work tasks even at low temperatures.
This is a major advantage. High clearance, due to which the equipment has an increased cross-country ability, makes it possible to work with a variety of crops.
A weak traction can become a problem, which is not suitable for large farms, but this can more than be covered by high-speed characteristics, which are widely used for transportation work.
Owner reviews
In order to get full information about LTZ-55, reviews will help a lot.
The owners appreciated the ability to use a large number of different mounted units with this machine. Most speak very positively about a really spacious cabin. Separately, it is worth mentioning the front axle, which is made leading. Choose this tractor and because of the reverse.
When the work schedule is very busy, the owners talk about one single drawback - poor traction, but this is individual. In general, most owners of small farms are completely satisfied with this tractor.