Probably, every owner of domestic VAZ products was faced with the problem of non-working turn signals. As a rule, the owners of the old Lada suffer from this. However, despite the great progress and development in the world of technology, this trouble has not ceased to haunt the Volga lineup so far. VAZ 2110 is no exception. And if the turn signals have stopped working for you, do not rush to change the light bulb - perhaps the whole thing is in the fuse box. The latter insure the operation of all electrical appliances in the car circuit. Therefore, in the event of a short circuit , the fuse block VAZ 2110 takes the first blow. And today's article will be devoted to this particular device.
Fuse scheme VAZ 2110
Each
mounting block has an arrangement of all the parts inside. On it, an arrow or a black bar indicates which fuse performs this or that function and where it is located. A diagram is in every car manual.
The fuse box VAZ 2110 protects against short circuit the following elements:
- Lamp of lanterns of illumination of license plate and devices.
- Position lamp indicator light.
- Left, right headlight (low / high beam). Here, each element has its own fuse (a total of 4).
- Portable lamp.
- Front and rear fog lamp bulbs.
- Power window motors and engine cooling fan.
- Portable lamp.
- Turning on the glass heating.
- Circulation valve fuse.
- Relay of direction indicators and emergency gang.
- Brake lights.
- Door lock and generator winding.
- On-board computer and panel board illumination.
- Heater controller.
- Glove box lighting lamp.
This was only a small part of what protects the VAZ 2110 fuse box in the event of a short circuit in the electronic circuit. Therefore, each malfunction of headlights, side lights and other elements may be due to the failure of this part.
Where is the fuse box VAZ 2110?
On all vehicles of the "tenth family" this element is located to the left of the steering column, in the lower part (see photo No. 3). Visually it is impossible to see, since the entire area of the device is covered with a plastic cover. Underneath is a mounting block, which motorists often call a “black box” because of its characteristic design and color.
What rated current can a fuse box pass in a VAZ 2110?
Approximately 30 amperes. However, this value may vary. Typically, fuses comply with IEC (EN) EN 60127 and GOST R. Such parts are able to withstand a fairly high current (up to 30 Amperes), which occurs in the electronic circuit when shorted. Fuses complying with this standard can hold this voltage for a long time without melting. However, if this current is above 30 A, the unit may not be able to withstand, and all parts in it will burn out. They cannot withstand such stress, since the temperature inside the mechanism can reach several hundred degrees Celsius.