Car enthusiasts who want to completely transform their car through tuning should pay attention not only to its appearance and power plant, but also to the interior, one of the main components of which is the skin. The standard door trim of the VAZ 2110 does not look very attractive, therefore, in order to give your iron friend uniqueness and modernity, many drivers make or purchase ready-made sets of such parts. Fortunately, the assortment allows you to do this.
In today's article, we will consider how the door trim of the VAZ 2110 luxury is removed and its constriction occurs.
Why is it better to do the casing with your own hands?
Of course, ready-made kits will significantly speed up the process of hauling, however, having seen the cost of such parts, motorists begin to think: “But can you do the same with your own hands?” Moreover, today's assortment of fabrics and other materials allows you to create a lining according to your own design. But for the finished part to really be more beautiful than the standard one, and not vice versa, you need to work hard. And the better you work, the better the skin will look. Therefore, if you have a lot of free time and are not busy at the weekend, to create such a product with your own hands is quite realistic. In this case, you will save up to half the cost of the original skin, which is sold in stores. But to create or acquire a casing is half the battle. Ahead you will have an “impossible” task with installing this part in a car. We will talk about how the door trim of the VAZ 2110 is removed and how the process of its hauling takes place right now.
Dismantling the car door trim
It is worth noting that even a novice car enthusiast can cope with this work, since this part has the most primitive design and simple fastening elements. But here there are some nuances. For example, the removal of the euro door trim VAZ 2110 does not occur without dismantling the power window lever (if one is installed on your car). Also, experts recommend stocking up with plastic clips in advance, because most of them burst during dismantling.
After all fasteners have been successfully removed, it is necessary to remove the plug from the door handle. Under it you will see 2 holes. They have bolts that we need to remove (this is done using a regular Phillips screwdriver). When removing the handle, make sure that it does not damage the door opener. Next, we move to the lower part of the skin. Here on the "top ten" (however, as with all other cars) is a small pocket that is mounted on self-tapping screws. It must also be removed. After that, do not rush to pull the casing, since, in addition to all other details, many other important things connect it to the door. On VAZs, this is a lock lock button and a plastic overlay at the mirror adjustment lever. Now feel free to remove the trim from the car door, after removing 8 plastic clips from there. Door trim VAZ 2110 successfully dismantled. Now you can proceed to the main stage - hauling.
VAZ 2110 door trim tuning - hauling process
Here, during the execution of work, we need furniture leather (in stores it is called vinyl leather). From the tools you should prepare a building hair dryer, brush, glue and stationery knife. It is best to start from the front doors, and then go to the rear. First, the casing is cleaned of accumulated dust and dirt, treated with alcohol and degreased. Then you can safely proceed to gluing. Work begins with the fact that a layer of glue is applied to the door trim. After the substance on the surface has dried (in time it is no more than 5-10 minutes), proceed to processing the reverse side of the element.
The final stage - gluing
Then, using a hair dryer, the skin substitute is glued to the skin. Due to the effect of high temperature, our material will become more elastic, accordingly, all the bulges and irregularities will be excluded (that is, the work will be done without "jambs").
The edges of the skin are neatly bent and trimmed with scissors. The same work is done with the rear pair of doors. By the way, the hole for the door handle is processed in the same way - first 2 cuts are made diagonally, glue is spread on both sides and the material is bent inward.
Conclusion
Everything, at this stage, the door trim of the VAZ 2110 is successfully overtightened. It remains only to wait until the glue dries, and you can proceed to assembly. The skin is installed similarly to disassembly in the reverse order, with the replacement of all cracked clips.
In order to maintain the overall style of the interior, it is recommended not to stop only on the door trim, but to tune the entire cabin, especially since you already have such an experience!