Owners of bicycles who prefer night riding are seriously at risk of getting under the wheels of the car if no identification beacons are installed on the bike. Street lights illuminate the bike rather dimly. Reflective bicycles allow you to protect yourself from troubles.
Appointment
Bike reflectors must be provided in the kit. Traffic rules require the installation of a white front and red rear reflective means on the bike, as well as yellow beacons on the pedals and spokes of the bike.
Since two-wheeled vehicles are hardly noticeable on the road, reflectors on a bicycle can increase the level of safety during riding. Naturally, reflectors do not emit light on their own. Therefore, they become noticeable only when hovering car headlights.
How to remove reflectors from a bicycle? Such a need often arises when it is necessary to reduce the total weight of the bike, as well as improve the balance of a two-wheeled vehicle during high-speed driving on the highway. In fact, with standard fasteners in the form of a bolt and nut, it is not difficult to cope with the task. However, some reflectors, especially reflectors that are located on wheels, are not so easy to remove. To do this, you have to remove the needles or damage the fasteners of the products.
Knitting reflectors
Many cyclists consider the reflectors that are mounted on the spokes of the bike to be rather useless and even unnecessary accessories, since the latter worsen the wheel alignment. In theory, an excess load weighing even a few grams can create some imbalance when driving. However, this significantly affects the quality of movement only with the development of maximum speeds.
Reflective elements on the wheel spokes several times increase the safety level of the lover of night trips. In addition, they are an excellent decoration for a bicycle in the dark.
How to install reflectors on a bicycle? For this purpose, special connectors are provided in the reflective elements , which catch on to the spoke of the bicycle.
LED reflectors on a bicycle
When the weather is rainy or the space is foggy, reflective products do a poor job of their tasks. To avoid trouble, just install LED reflectors on a bicycle. Photos of such devices can be seen in this material.
Such luminous reflectors can be seen from a considerable distance in the worst weather. However, their operation requires a connection to a power source. Experienced cyclists prefer to ride with a flashlight that runs on a dynamo attached to the front wheel or on batteries. It is here that it is most advisable to attach reflectors with an LED.
Reflective fabric
An excellent alternative to standard reflectors are fabric bases with reflective ability. The latter are adapted to the bike or equipment of the cyclist: clothes, a backpack, shoes, a protective helmet. Often such fabrics are glued to the rims of a two-wheeled vehicle.
parking lights
The purpose of such lighting equipment is to ensure maximum visibility of the cyclist on the road in the dark. Many owners of bikes consider it mandatory to install a rear gauge, which is able to work in normal glow, blink and frequent pulsation modes. The presence of such functionality allows you to make the bike most noticeable depending on the conditions in which the movement occurs.
Choosing such a bicycle flasher, attention should be focused on the power indicator, since a weak overall size is almost useless. As for the viewing angle, with the glow here it should be about 180 about .
Finally
Cyclists who try to avoid night trips for personal safety can safely do without installing reflectors. Ideally, the bike should be equipped with a full range of reflective elements. Reflectors on wheel spokes are no exception, because only thanks to them the bicycle becomes noticeable at intersections and during turns.