Unfortunately, many people who decide to make repairs themselves and save on the services of professional workers face a lot of problems. One of the most common stumbling blocks is the question of where to start gluing wallpapers. How to perform this step correctly , you will learn from today's article.
Variety of assortment
Before proceeding with the repair, it is necessary to select and purchase all the necessary materials. A fairly wide range of products is presented on the modern construction market. Therefore, anyone who is interested in where to start gluing wallpaper in the room, will not hurt to deal with existing varieties.
One of the most popular is considered a relatively cheap paper coating. This environmentally friendly material is highly breathable. Its cost largely depends on the quality of the paper taken as the basis. Such wallpapers easily absorb odors and quickly become dirty, so they are not recommended for decoration of kitchens and bathrooms.
Vinyl wallpapers made on a paper or non-woven base coated with polyvinyl chloride managed to gain no less popularity. They are immune to moisture and resistant to mechanical damage. In addition, this material practically does not absorb odors and dust.
The next popular wall covering is non-woven wallpaper. It is worth noting that their characteristics are approximately the same as that of paper counterparts. But in appearance they are more like fabric. The most important advantages of this material include strength and resistance to deformation.
In addition to the above varieties, metallized and liquid wallpapers can be found on sale. The first are rich in texture and resistant to mechanical damage. The second are more like ordinary plaster.
List of required materials and tools
Before you figure out where to start gluing wallpaper in a room correctly , you need to prepare everything you need for work. Typically, the standard set includes the following tools:
- Rubber roller.
- Scissors or clerical knife.
- Capacity for the preparation of glue.
- Putty knife.
In addition, you need to take care in advance that at hand there are such devices as tape measure, plumb line, brush and a simple pencil.
Existing alternative
Those who want to understand where to start wallpapering in a room will be interested to know about the existence of several different ways. To date, only three valid options are known : wallpapering from doorposts, from a corner or from a window. It is recommended to start from the place where, as you think, the wallpaper will be glued strictly vertically. Each of these methods has undeniable advantages, which we will discuss later.
How and where do I need to start gluing wallpaper in the room?
First of all, it is necessary to prepare the room for repair. At this stage, you should get rid of the remnants of the previous coating, align and prime the walls. Those who plan to glue the wallpaper with an overlap can be advised to start from the window. This is one of the easiest ways to hide the formed seams.
Before cutting the panel, you need to measure the height. This can be done with a tape measure or tape. Experts recommend making a small margin. Then the prepared web is coated with glue and left to impregnate. If the instruction provides for applying the composition to the wall, then dry wallpaper is applied to the oiled surface.
Starting angle or line selection
It's time to consider where to start wallpapering in the room. Those who decide to do this from a corner will have to pre-align the walls. In this case, they must be brought to almost perfect condition. Particular attention will need to be paid to the corners. It should be understood that this is a rather difficult task, which only a highly qualified specialist can cope with.
For those who are not yet confident in their abilities, and are considering where to start gluing wallpaper in the room, you can try to do it from the doorway. However, in such cases, one must strictly observe verticality. Follow this requirement with a plumb line. The most important thing is to stick the first canvas correctly. Then you can act in your intended direction.
Those who are not suitable for any of the previous options and who can not decide where to start gluing wallpaper in the room, can be advised to start from several lines. It is advisable to apply this technique only if there are a large number of windows and other obstacles. In such situations, many joints are formed that need to be hidden.
How to maintain a vertical at uneven angles?
For those who need to dock the ornament with the main glued canvas, it is recommended to use a new sheer line each time in the process of performing work. As a result, the last canvas pasted on any of the walls will go around the corner of the next couple of centimeters.
Such joining will allow to achieve a more neat and aesthetic appearance. However, this technique is suitable only for thin wallpaper. Thick ones are desirable to bring in a vertical line, cutting off the incoming edge.
Where to start gluing non-woven wallpaper in the room?
According to most experienced craftsmen, this is best done from the corner. To get the perfect joint, you need to measure on the wall a distance equal to the width of the panel, and draw a vertical line. Then coat the coating with pre-diluted adhesive. This can be done using a roller or brush. It is important to purchase a special glue in advance, which contains components that prevent the appearance of the fungus. The choice of composition is especially important if repairs are done in rooms with a high level of humidity.
After this, the canvas needs to be applied strictly according to the markup made and carefully smoothed with a clean soft cloth or special tool. It is important to ensure that no bubbles form during the work. All excess should be pressed tightly with a wallpaper spatula and cut with a knife.
Each subsequent canvas needs to be glued back to back, not forgetting about combining the ornament. The resulting seams should be ironed carefully using a special roller. One of the most problematic places are all the same angles. That is why they need to pay special attention. To get rid of wrinkles that appear, you can make small cuts through which air will escape.