A motorcycle is not just a means of transportation, but the most faithful and irreplaceable “iron” friend. The loss of a metal horse is not the most pleasant thing that can happen in a person’s life, therefore it is advisable to use various methods of protection to prevent his theft.
The best and most popular option is a motorized alarm with feedback, which protects the vehicle from theft.
Feedback motorcycle alarm
The main difference between automotive systems and systems installed on two-wheeled vehicles is the compactness and small size of the second. This is quite reasonable, since the motorcycle has very little space for installing an alarm.
Another difference is the ability to configure the built-in tilt sensor using a special control panel.
In addition, protecting a bike compared to a car is much more complicated and requires the use of a combination of several means at once - for example, electronic systems and mechanical locks. In fact, the alarm system itself does not give a 100% guarantee of vehicle safety.
The best option to complement such a system is a special cable that blocks the movement of the rear wheel, which makes it impossible to steal a motorcycle.
In addition, it is advisable to purchase a special pager that will notify the owner of an attempt to steal an iron horse.
Feedback motor alarm: equipment
Such anti-theft systems are a unit with a speaker, from which four wires extend. One of the wires goes to the start / stop button of the device, the second to the antenna, and the remaining two are connected, respectively, to the “plus” and “minus”. A remote control key fob is usually supplied with an alarm. A 12 V battery is sufficient to power the entire system.
A high-quality and reliable security system consists of several elements. It includes, in addition to electronic, mechanical protection, presented in the form of a lock or a massive chain to the front brake. An ideal alarm should have shock, movement and tilt sensors , a pager to send information to the motorcycle owner, a siren and block the engine if necessary.
Equally important are contact sensors mounted on the seat and glove compartments. As their alternative, you can use reed switches intended for the alarm protection of apartments.
Since classic limit switches require fastening with metal brackets, it is impossible to place them in a motorcycle. Reed switches are purchased taking into account the fact that when the sensor is activated, all contacts are closed immediately. Of course, you can purchase standard models, but in this case you will have to install a resistor with a resistance of 20 kOhm and several diodes for isolation.
The principle of operation of motor alarms
As mentioned above, the standard set of security systems for the bike includes the device itself, sensors that are sensitive to movement, shock, selection of keys and tilt, as well as a remote control keyfob to which notifications come.
The principle of operation of the alarm system is quite simple: when at least one sensor is triggered, the entire circuit closes, the motorcycle engine is blocked , and a sound notification is sent to the vehicle owner’s remote control.
Despite the rather high efficiency of security systems, they are far from always able to prevent bike theft. In order to surely prevent theft, a motorized alarm with feedback will be the best option.
Advantages of two-way security systems
Unlike feedback alarm models, such devices are more efficient and reliable. The range of their effects is somewhat larger, and they respond not only to mechanical factors.
Simply put, if a motorcycle is trying to hijack or take any action with it, the sensors are turned on and the system sends an alarm signal to the key fob located at the owner.
Among the whole variety of security systems for “iron horses”, feedback motor feedback is the most effective and reliable. Reviews of motorcycle owners using such devices speak for themselves: they are very convenient, especially if the bike is not left in the garage, but in the courtyard of the house, for example, they have a low cost - about 2-5 thousand rubles - and ease of installation, they really let you know about attempts to steal a vehicle and minimize the risk of its theft.
Varieties of motorcycle alarms
There are several main types of security systems designed to protect bikes from theft:
- Feedback motorcycle alarm. It has a large radius of action. The kit comes with a portable keychain with a display, which displays information about changes in the state of the motorcycle.
- Motorcycle alarm with feedback and auto start Kawasaki X-Men. Convenient and reliable system that can significantly reduce the warm-up time of the vehicle engine, which is especially important in the cold season.
- GSM alarm. It is considered one of the most modern and effective means of protection. All information about the condition of the motorcycle is transmitted to the owner’s cell phone. It has wide functionality. The use is very simple - it is enough to charge the device and place it on the motorcycle, having previously sealed the beacon.
Self-installation of motor alarms
Before starting the installation of the security system, check the battery charge level and voltage in the bike's electrical network. After the continuity of all wires, the battery is turned off and the central unit is sealed with electrical tape.
To set the alarm, you need to place it in a secluded place on the motorcycle and connect the wires to the "plus" and "minus". It is advisable to position the unit so that it cannot be reached without raising the seat or opening the side panels. After that, the system is powered from the wiring.
In hard-to-reach areas, locks are made. You can put them on any circuit - both on the gasoline pump and on the ignition.
The next step is to install an autonomous siren. The whole system is connected to the turn signals, an antenna is placed, a pager is hidden behind the fairing.
The battery is connected. If the motorcycle is not used for a long time, it is advisable to strip the wire from the “minus” of the battery in order to prevent its discharge.
StarLine Feedback Bike Alarm
Security systems of this brand are considered one of the most reliable and effective anti-theft devices that use a dialogue code to protect bikes. Excluding the full range of service functions, StarLine V62 feedback motor alarm has:
- Dialogue authorization. To protect against hacking, the innovative and most advanced code with 128-bit encryption keys and the jumping frequency method are used. Such a system is used for the first time and significantly complicates the process of hacking. Motorized alarm with feedback and auto-start applies this code both in the main and secondary keychains.
- Megapolis mode. It increases several times the range of operation and notification of the system. In addition, in this mode, no radio interference is terrible.
- Native shock sensor. A motor-alarm system with feedback and autostart has a two-level shock sensor, which instantly detects the external effect on the bike and sends information to the owner.
Complete with a special immobilizer StarLine, you can create an impregnable and reliable system to protect the motorcycle from theft.