Wooden houses have been in demand for many years, and there are many reasons for this. Because visually a log cabin made of wood is attractive, but inside it is cozy and completely safe for humans. Such housing keeps heat for a long time, which means it suits everyone. But that is not all. Many say that the tree carries a positive energy and health benefits.
note
Although there are some points considered negative. This is a short service life. But today this nuance is minimized subject to competent care. This includes methods and methods of processing wood with special compounds, as well as coloring. It is the last procedure that is important to perform in a timely and correct manner. You can always find useful recommendations that are taken as the basis for the performance of work. Below will be a text for information, as well as a photo of painting a house from a bar. Sometimes it is visibility that becomes the main factor for making a decision. A wooden house has many places that are difficult to process, so you need to pay maximum attention.
Why is wood required to be treated?
Wood does not have the same qualities as concrete or brick. Therefore, it is quality care that prolongs the operational properties of the structure and makes it attractive even after years. But why is painting a house of glued beams necessary? The fact is that this material does not withstand the constant influence of natural factors. Among them it is worth noting:
- Differences in high and low temperatures.
- A variety of rainfall.
- Constant exposure to sunlight.
- Mold, fungus, insects that can destroy such a structure.
When processing with special compounds and painting the house from the timber is not performed, the structure collapses, loses its original color, is deformed, and its strength decreases several times. The most destructive of the entire list should be considered moisture and sunlight. It is because the tree gets wet, after it dries, it starts to lead in different directions, the original form changes. If cracks are fixed, then insects and mold are already beginning to appear in them.
This is important to consider when creating a protective layer on the surface. But this must be done on time, because there are bark beetles that bred inside the log and begin to destroy it. After that, returning to its previous state simply will not work. Therefore, it is important to start the processing process on time in order to prevent the slightest damage.
What tools should be used?
Painting a house from a bar is an important stage, but it is worthwhile to use other means for reliability and an increase in operational characteristics. Even those log houses that are erected in a dry and warm climate must be processed. We are no longer talking about areas with high humidity and constant rainfall.
As soon as the log house is made, it is treated with special protective compounds, and after that paint of different filling is applied. It is worthwhile to understand this issue in detail in order to know what to purchase. Here's what you can handle the house:
- Antiseptic compounds. What it is? These substances have a structure that can penetrate deep into the tree and prevent the absorption of water. Since there is protection from precipitation, then decay will not occur. On sale you can find glazing and topical antiseptics. Each has its own life, and after this time it will be necessary to repeat the procedure.
- Acrylic paints. This is a unique opportunity for everyone who has a wooden structure. Because they not only create a barrier to destruction, but also have their own shade. Often they are used for internal application, because the compositions do not harm human health. Such painting of a house from a bar is suitable for a ten-year period. A big plus is that these paints do not create a barrier to steam. It turns out that there is no vacuum effect. Often buildings undergo slight deformation. Such a coating is elastic and does not crack.
- Oil-based paints become a barrier to water. This is not too expensive finish. Such paints are suitable for facades, because they have a strong smell. In order for this application to completely dry, it takes at least 24 hours. But it is important to consider this drawback - under the influence of the constant sun, they fade and lose their appearance. Pros - this is a low cost, they do not respond to moisture and penetrate well, creating a protective barrier. Shelf life is five years.
Alkyd paints
Painting of a wooden house made of timber is carried out with alkyd paints. They are comparable to the previous version, but less time is needed for complete drying. There is no pungent odor. There is a glossy and matte finish on sale.
Reactive
Basically, they paint the house from the timber outside. Because they interact well with precipitation of various formats and temperature extremes. They are created from reliable components, but immediately applied to the surface, otherwise it will not be possible to further apply. Not everyone can apply such compounds, but the service life is long.
Application Technique
Each specialist has his own theory on which he conducts work. But to summarize, we can distinguish the main steps, without which nothing will come of it:
- Painting a house from a bar outside and inside begins with the process of cleaning from dust. In the presence of any old coating, it is completely peeled off. This is the only way to guarantee high-quality adhesion of the protective layer to the material.
- Particular attention is paid to the quality of the selected coating. Do not take dubious brands from those manufacturers that are not known.
- Each product has instructions - on the package with paint or any other composition there is a lot of useful information on the application, do not lose sight of it.
- Each paint has its own application method and drying period.
- Climatic conditions should be taken into account when buying paint. Each region has its own impact - sun, moisture, frost, etc. The choice is made accordingly.
- The wood from which the structure is built is taken into account. Each has its own properties, and from this it is worth making a choice of protective equipment. For some, it is necessary to increase the vapor permeability, while for others, on the contrary, it is important to create a protective film.
- To paint the house from a bar turned out to be of high quality, you need to apply an antiseptic on the entire surface before starting work. You should wait for it to dry completely. Another point: those places where the resin goes should be further processed.
- In order to get quality, the application of paint is carried out after all work on the construction of the house is completed. This is the presence of a roof, windows. It is important that the walls are aligned.
- You have to choose the right weather for painting.
Application of the coloring matter
As soon as the preparation has reached its logical conclusion and the antiseptic has dried, the main process begins - painting. Color can be very different. It all depends on personal preferences and the available design. When the paint is done, it is necessary to mix all the components, with the finished composition just open the jar and mix. Each recommendation on the package must be followed with the utmost precision. If there are any violations, the composition will be difficult to apply, and the service life will be reduced.
What next?
It is necessary to distribute the coloring matter in one layer over the primer. After that, let it dry and apply a second coat. To achieve the desired color, sometimes applied three, and four times. For work, everyone takes any tool. This is a roller, brush or spray. If you need to fill hard-to-reach places, then a small brush is taken. So that everything works out smoothly and perfectly, you can use all the tools at the same time or for each area your own.