The variety of types of manicure in recent years is simply amazing. Inside, masters do incredible things with the fingers of their clients. Now you can not only treat the cuticle and skin of the hands in different ways, but also change the shape of the nail plate. In most cases, special forms, tips and gels are used for this. This article will describe the coating of nails with gel without extension. You can learn about the features of this procedure. Also find out what you need to cover the nails with gel.
Necessary materials and tools
If you decide to coat the nails with gel without building, you will have to arm yourself with some materials and devices. The most important thing in the work is the presence of a viscous substance, which will subsequently be laid out on the plate. The gel may have several types. It is preferable to choose the well-known three-phase system. This includes the base, base and topcoat. Also recently biogels have gained great popularity. However, such materials do not rest on their nails for more than two months. They have to be completely removed during correction and re-applied. There are also three in one system gels. Such a coating will replace your base, foundation and final layer. What to choose is a personal matter for each person.
In addition to the material you will need tools. This includes abrasive files, buffs and wipes. Do not forget about the primer, which will fasten the coating of the nail with gel, and a degreaser. Do not do without an ultraviolet lamp. How is gel coating of nails done without extension? Step-by-step instructions will be presented to your attention below.
First step: preparing natural nails
Before you start coating the nails with gel without building, you need to properly process the plate. To do this, you need a file of medium hardness. First, determine the length of the nail and file the edges, making the same shape. After that, grind the upper part of the plate. You need to do this very carefully, do not overdo it. You do not need to completely sharpen the nail, but only remove the thin top layer.
When the work is done on all the fingers, you can proceed to cover the plate with a primer. This tool will improve the adhesion of materials and help to avoid detachment in the future. Remember that after such a coating you can not touch the top of the nails to other objects. Otherwise, the thinnest layer will be broken.
Second step: basic coverage
When the primer dries (usually within one minute), you can apply the base. This should be done in a very thin layer. The gel should not just be laid out on the surface of the plate, but as if rubbed into it.
The base coat must be dried in the lamp for two minutes. Remember that you can not touch the nails with foreign objects. This can lead to damage to the gel layer or sticking of foreign particles to it.
Third step: second layer
Coating nails with gel without extension necessarily involves applying a modeling layer. If you increased the length of the plate, then you would have done it with this material. Take a brush and apply a thin modeling layer. If desired, this tool can correct the shape of the marigold.
Dry the laid modeling gel in a lamp. Depending on the power of the tool, the exposure time should be from three to seven minutes. Swipe your fingers one at a time and move on to the next step.
The fourth step: shaping
Further gel coating of the nails (instructions) involves filing the lined layer. Arm yourself with an abrasive tool and give the gel the desired shape. If you are completely satisfied with the size and width of your fingernail, then simply align the modeling layer with a file or a hard buff. Remember that in the process of spreading the gel, you should not wash and wet your hands. A napkin impregnated with a degreaser will help clean the nails from dust.
Fifth step: top coat
The step-by-step gel coating of nails in the next paragraph involves the application of a top coat. It can have two types: sticky and non-sticky base. In the first case, you will need to use a degreaser and a grinding surface in the future. If the coating is not sticky, then it will be enough just to dry it in the lamp.
Spread the finish layer very thinly. After this, the fingernail is not subjected to overcutting and is not modeled. When the layer is dried, you can safely wash your hands and start applying the design.
How to correct natural gel-coated nails ?
Like an extended coating, own nails under a gel layer require periodic correction. It must be carried out as follows.
- Saw off the top (finishing) layer with an abrasive tool.
- Give the nail the desired shape.
- Apply the primer and let it dry. Pay particular attention to processing the free edge of the plate.
- Put the base on a natural nail and dry it in a lamp.
- Cover your nails with a modeling layer and treat it in an ultraviolet apparatus.
- Apply a finish coat and dry.
- Wipe the nails with a degreasing compound.
The use of biogel
Natural formulations are increasingly being used in order to coat nails with gel without extension. Reviews about such funds are quite controversial. Some women are satisfied and confident that the gel is completely harmless. Other ladies do not recognize such material and prefer to use classical methods.
Biogel is applied in the same way as a standard coating. However, the layer in this case will be only one. Some materials do not require the use of primers or other bonding agents. Biogel is dried in the usual way in a lamp. The service life of this coating is approximately one month. After this, the layer is removed and a new composition is applied.
Three in one system application
This type of gel coating of nails without extension is the simplest and easiest of all presented. To work, you need to follow the instructions below.
- Saw off the top cover of a natural plate. Do not overdo it.
- Wipe the nails with a degreasing compound and remove the dust from them.
- Coat the fingers with a primer and let it dry.
- Using a brush, lay out the thinnest gel on the fingernail.
- Put your fingers in the lamp and hold there for 2 minutes.
- The next layer should be slightly thicker. It must also be treated with ultraviolet light. However, you need to keep the pens in the lamp for up to five minutes.
- Wipe the coating with a degreasing solution.
- Buff buff the top coat. After that, you can start applying the design or coating with ordinary varnish.
Gel Nail Coating
What are the advantages and meaning of creating such a coating? The nails of the fairer sex remain in kind. They do not get longer. After all, many women consider this technique vulgar.
The undoubted advantage of this treatment is that the plate becomes much stronger. You can do all the usual housework and not worry about the nail breaking or starting to peel. Also, the design on such nails lasts a little longer than on natural ones.
Summing up the article
You now know how gel coating of nails is done without building. Photos of the final work are presented to your attention in the article. If you are not confident in your abilities or the necessary materials are not available for work, then contact a nail salon. Specialists and experts in their field will quickly draw up your nails and do what you want. Take care of your pens and be beautiful!