Industrial sewing machines are very different from household models. First of all, the versatility of shuttles should be noted. Depending on the type of construction, belt and chain stitch devices are distinguished. Also, cars are divided by degree of automation.
The market includes fully mechanical and automated mechanisms. In a separate subgroup there are automatic machines and semi-automatic machines. In order to understand the devices in more detail, it is necessary to consider the existing classes of models.
Device Classes
Various industrial sewing machines are on the market. Device classes help users learn about the purpose of a particular modification. Single-strand models are sold labeled 24. Class 50 indicates that the device is suitable for flat-seam stitching.
Two-thread models are designated 62. Class 70 suggests that the device is manufactured with combined screeds. The number 88 on the typewriter indicates the versatility of the shuttle. These models are great for ateliers. For the purpose of flashing with a blind stitch, class 90 cars are used. The designation 101 on the model indicates the presence of a vertical shuttle. These devices are suitable not only for hidden lines, but also for zipper firmware. Class 112 is given to machines designed for overlock stitches. There are also models for direct firmware. This is class 130.
Browse Brother B845 Models
These industrial sewing machines are manufactured with two needle threaders. In this case, the user is able to adjust the stitches along the length. The shuttle in the device is located in a horizontal position. The motor is installed asynchronous type and has a power of 80 watts. The power consumption of the model is small. All standard bobbins are included. It is also important to note that the device is used for direct firmware. In total there are six foots for a blind seam. The model also has a high-quality filler. For these industrial sewing machines, prices fluctuate around 35 thousand rubles.
Brother B530 Reviews
This straight-line industrial sewing machine gets good reviews from customers. First of all, it is important to note the quality of the shuttle mechanism. In total, it is designed to carry out ten programs. For direct firmware, the model can be used. However, its main task is edge wrapping work. The needle threader is a swing type.
Directly the device for tensioning the thread is installed in the upper part of the housing. If we talk about the parameters, then the power is at around 88 watts. The embroidery speed is about 300 lines per minute. The bobbin in this case is regulated by a special handle. The model weighs quite a lot and is stable. It is not suitable for skin firmware unambiguously. It is also important to note that in the kit there are only three paws to choose from. Thus, making a blind seam with a machine is difficult. It is sold at a price of 41 thousand rubles.
Features Brother B780
These industrial sewing machines are distinguished by a quality needle threader with support. In total, two coils are used in the device. If necessary, bobbins can be changed quickly. A special device is used to tension the thread. The presented machine for decorative construction is suitable. In this case, the foot feed mechanism is located next to the needle threader.
The motor is used asynchronous type. The user can set the stitch to a maximum of 3 mm. The bobbin in this case is easily adjustable. This machine is sold in stores at a price of 32 thousand rubles. In various ateliers, she is very much in demand.
Features JACK JK-781D
These industrial sewing machines are manufactured with a vertical shuttle. The length of the loop in this case can be changed. It is also important to note that the shuttle device allows you to perform more than six different lines. The maximum stitch can be set to 4 mm. For direct sewing of fabric, the model is not suitable. First of all, it is important to mention the small set of paws. The bobbin pressure regulator is installed mechanical type. However, the advantages include compactness and good stability.
If necessary, the foot can be changed quickly. The slats for supplying fabric are segment type. The embroidery speed of the model is quite large. The gasket is used very soft, working behind the typewriter is quite comfortable. If you believe the buyers, then problems with a blind seam are rare. It is also important to note that in the kit with the device, the user can find a large set of needles that will be needed for work. A model is sold at a price of 33 thousand rubles.
JACK JK-900D Reviews
This machine belongs to the class of budget devices. However, the quality of the parts is pretty good. The shuttle is upright and suitable for overlock stitching. However, it should immediately be noted the disadvantages of the device. First of all, customers complain about a compact needle threader. Sometimes it breaks, because of which the thread has to be untangled for a long time. Another problem lies in the small set of paws. Quickly change them during operation will not work. The pressure regulator of the presser foot is installed mechanical type. With a large amount of work, this crane is uncomfortable. There is a model on the market about 27 thousand rubles.
Consumer reviews for JACK JK-210D
For the studio, this model is perfect, because it is made with interchangeable legs. In total, the set has seven bobbins. If necessary, the user can change the sewing speed of the fabric. The machine works on an induction motor. It is also important to note that the kit has a large set of needles. The screed in the device can be set to a maximum of 4 mm.
For a straight line, the model is suitable. If necessary, the thread tension can be adjusted. There is not much pressure on the foot. A narrow lining is provided for fastening the thread. The force of puncture with a needle is very simple to control. It is also important to note that the device uses a quality shuttle with a loop. The coil is mounted on a special support.
Auto winding system for the model is provided. If necessary, the user can turn off the reverse. The thread cutter is of a mechanical type. The gasket is applied quite durable, and wears out slowly. If we talk about the shortcomings, it is important to note that this machine weighs a lot. Her shuttle is large. The power of the induction motor is 77 watts. A model is sold at a price of 33 thousand rubles.
JACK JK-133D Models Review
This machine is very popular. A distinctive feature of the model is the high speed of firmware flashing. The needle piercing force can be adjusted. For pulling fabric provides a special rail. For the purpose of firmware in different directions, the model fits perfectly. Paws for industrial sewing machines are included in the kit of various shapes. In this case, you can change them without problems. The pressure regulator is provided mechanical type.
This model weighs exactly 8.5 kg. The gasket is made of rubber. The model is suitable for finishing stitching. Of the disadvantages, it is important to note a simple tension regulator. Rollers may jam from time to time. Customers also complain about the inconvenient handle for feeding fabric. Machine for sale at a price of 42 thousand rubles.
Typical GC 6150-H Reviews
Typical GC 6150-H industrial sewing machine is manufactured with a horizontal shuttle. The needle threader is of the classic type. A pressure regulator is installed next to the engine. If you believe customer reviews, then with straight lines problems rarely arise. Laying on the working area is provided for large widths. All this allows you to flash the fabric in various directions. Adjusting the puncture needle is quite simple. A felt pad is not provided in this case. The maximum stitch can be set to 5 mm.
For overlock lines, the model can be used. It is also suitable for overcasting. However, before buying it is important to consider the shortcomings of the model. First of all, they are connected with a loop. In this case, the coil is installed without reverse. Thus, the needle threader sometimes works with scrolls. The power of an induction motor is only 64 watts. Hidden foot pads are not included. In total, there are two bobbins in the set. For reinforced stitching, the model does not fit unambiguously. However, you should consider the low price of the goods. At Avito, industrial sewing machines Typical GC 6150-H are sold for 26 thousand rubles.
Cars of the company "Dzhuki"
Industrial sewing machines "Dzhuki", as a rule, are made with asynchronous motors. Also on the market are devices with servomotors. Their distinctive feature is the presence of foot pedals. Shuttles in the devices are located in a horizontal position. For straight stitches, the machines are ideal. It should also be noted a reasonable price for the model. On average, the machine will cost the user around 40 thousand rubles.
Types of cars "Dzhuki"
According to the degree of automation, mechanical as well as automated devices are produced. Reverses are used swinging and rotary type. The platforms can be flat, cylindrical or U-shaped. Separation also occurs as intended. The stores feature loop, combined and differential devices.
Juki CP-180D Reviews
These industrial Juki sewing machines are very popular due to the wide working platform. Their reverse is provided with a swinging shuttle. For straight stitches, the model fits well. According to customers, problems with the needle threader are rare. The firmware speed in this case can be adjusted using the controller. The paws in the kit turn on quite durable, rarely break. It is also important to note the quality of the bobbins. The tension regulator is used with a roller mechanism. The rail for feeding the thread is used segment type. A special felt pad is installed above the motor.
The model does not work very loudly. If necessary, the tensioner can be removed. To stitch the fabric, a separate foot is used. The loop in this case is suitable for edge wrapping. However, there are disadvantages in the device. According to customers, the model has an uncomfortable quilting stand. The overlock foot is short. Also, the model does not have a free sleeve. There is no handle to carry the shuttle.
Juki LBH-780 U Reviews
These industrial Juki sewing machines are in demand even in prestigious ateliers. Directly the shuttle in them uses the combined type. For overlock stitching, the model fits perfectly. Also, the wide foot allows overcasting. Loop problems rarely occur with the user. The needle threader is used with a guard.
The lining is set on the working surface. The rack for supplying fabric is used segment type. For direct firmware, a separate presser foot is used. A blind seam can be made using a bobbin. This machine weighs exactly 8.4 kg. A thread tension regulator is provided of an automated type. Presser foot pressure can be adjusted from the panel.
The thread cutter is used in the classic type. The stand itself is made of plastic for him. To adjust the loop, a separate rail is used. Winding the bobbin takes place automatically. For sewing in different directions, the model can be used. The user can buy the specified machine for 47 thousand rubles.