HDX is noteworthy for producing electric as well as fuel boat engines. If we consider the first option, it should be noted that the power of the device varies around 4 kW. Due to this, the central shaft in the model is capable of reaching about 5 thousand revolutions per minute. Most boat motors are extremely quiet.
This is due to the fact that their protective covers are installed above the rotor. If we talk about fuel modifications, the average gas consumption is 1.3 liters per hour of operation. For the price, the user is always able to choose a suitable option. If we consider a good fuel boat engine, then it will cost about 30 thousand rubles.
Consumer reviews for the HDX T26 model
This single-cylinder outboard engine HDX (5 hp) has low power. However, he is able to serve the owner for quite some time. It should also be noted the high quality starter. It starts, as a rule, the first time and breaks quite rarely. This boat motor is capable of squeezing a maximum of 4300 rpm. As a result, it can be described as simple and reliable. The presented HDX motor (5 hp) will cost the buyer about 21 thousand rubles today.
What is interesting about the HDX T2 engine?
This HDX T 2 BMS outboard motor is now in great demand. However, it should be borne in mind that the engine in this case is set to two-stroke. There are three pistons in the design, and they are arranged horizontally. If you believe the feedback from consumers, then the starter at this outboard motor works the first time. It is installed in the presented design of manual type.
Deadwood is automatic. In service, this model is quite simple. According to the owners, the carburetor cover is easy to remove. Oil consumption is negligible. Special attention to this boat engine deserves a cooling system, which is installed water type. It must be cleaned for normal use at least twice a month. This is done quite simply, but it takes a lot of time. This HDX 2 engine costs about 27 thousand rubles.
What is being said about the HDX T30?
These boat HDX-motor differs from other models in that the deadwood is set quite large. Due to this, the central stem is able to withstand heavy loads. According to consumer reviews, the carburetor in the presented model rarely breaks. However, there are still disadvantages of this instance. First of all, consumers note a high oil consumption. In this case, the fuel system is located near the sump. In this case, the valves are used quite thin. In some cases, after some time, the pushers are replaced. If we talk about the parameters, then the power of this outboard motor is at around 4 kW.
Thanks to this, the central shaft in deadwood per minute has the ability to make no more than 4 thousand revolutions. The crankshaft in this case is used quite solid. It is installed in the structure under the carburetor. If necessary, disconnect it from the connector without problems. As a result, we can say that this model is very interesting and for sure many will like it. It costs today about 32 thousand rubles.
Features modification HDX T36
These motors HDX reviews are good, and many buyers prefer them due to the fact that the flywheel is used in the design of the cranked type. In turn, the stator is installed manually. The maximum power of the specified outboard motor is at 4 kW. If you believe the feedback from consumers, then gasoline consumption does not exceed 1.2 liters per hour of operation.
In service, this model is very simple, but the rocker is sometimes difficult to detach from the deadwood. It should also be noted that the pump must be lubricated with oil at least three times a month. This ultimately takes a lot of time. If we talk about the parameters, then the engine displacement is 75 cubic meters. see. In total three pistons are installed in this case. In the market for the specified outboard motor, sellers ask about 30 thousand rubles.
HDX T35 model parameters
The specified boat HDX engine is capable of boasting a powerful engine. In this case, there are two cylinders in it. The thermostat for the presented instance is installed. The fuel pump is capable of withstanding a maximum pressure limit of 4 bar. The carburetor deserves special attention in the device. It is installed above the pusher and is extremely simple to maintain. In this case, the user can remove the cover of the cooling system by himself. However, to disconnect the deadwood, you will need help. The presented boat HDX motor is nowadays about 25,600 rubles.
What is interesting about the HDX T4?
To date, the presented HDX outboard motor (4 hp) is in demand because of its economical engine. It is classified as push-pull, and a maximum of one minute is able to produce about 4,500 rpm. The clamp of this specimen has a thickness of exactly 4 mm. Thus, the load on the tiller can be given more. The valves in the system are quite simple and do not need frequent lubrication. Among the shortcomings, only a rather short stock can be noted. In this regard, disconnecting the deadwood is very difficult. The presented motor in the store costs about 29,600 rubles.
New instance of the HDX T58
This boat engine differs from other models in that it has a special lock over the deadwood. Due to it, the position of the central rod the user has the ability to change. Thus, there should be no problems with the installation of the outboard motor. Pushers in the model are used standard. In turn, the clamp is installed exactly 5.5 mm thick. The angle of attack rod for this configuration is available. Also, this boat engine is capable of boasting a rather long tiller. In this regard, the device control can be called comfortable. The connector of the presented sample uses a mechanical one. It is located in this case above the pallet. On the market for this motor ask about 32,000 rubles.
Modification HDX T5
The gasoline consumption of the presented outboard engine does not exceed 1.3 liters per hour of operation. The maximum engine power is at 3 kW. In total, there are three pistons in this case, and they are arranged horizontally. The carburetor of the sample is located above the pan and is connected to the fuel system.
If you believe the feedback from consumers, then the oil specified instance consumes a little. However, the intakes have to be cleaned often, and this takes a lot of time. There are tilt locks in the indicated boat motor. They are located above the deadwood and, if necessary, you can remove them. The stem in this case is set to a length of 124 mm. Directly pallet thickness is exactly 4 mm. Thanks to this, it can withstand significant loads. The present instance is worth about 34 thousand rubles.
Consumer reviews for HDX T98
Most of all, this HDX 9 outboard engine is appreciated for its four-stroke engine. The central shaft per minute is able to make more than 4600 revolutions. The exhaust valve in the system withstands the pressure of 5 bar. There are six pushers in the presented configuration by the manufacturer. The camshaft of this outboard motor is fixed securely.
If you believe the feedback from consumers, then deadwood can be disconnected independently. The motor is mounted on the boat with a clamp. It is possible for the user to adjust its angle of inclination. According to the owners, the gearbox is installed quite high quality. Forward, the manufacturer provides four speeds, and back - standardly one. The presented modification is worth about 24,800 rubles.
Advantages of the HDX T15 Model
The engine of this outboard motor has a three-stroke. Thanks to this, the central shaft makes about 4600 revolutions per minute. The exhaust valve in this case, the pressure can withstand no more than 4 bar. Fuel consumption per hour of operation of the device does not exceed 1.3 liters. Of the shortcomings, a rather thin clamp should be noted.
In some cases, it is deformed due to heavy loads. Given this, it is more advisable to install the motor on a rubber gasket. It is also necessary to know before buying that this model is quite difficult to maintain. It is almost impossible to remove the carburetor cover on your own. Deadwood also disconnects with great difficulty.
The fixtures of the presented sample are used rather rigid. However, they still have advantages. This primarily relates to the moisture resistance of the device. In this case, the stem is not susceptible to corrosion due to the application of a special additional coating on it. In the market for the presented HDX motor they are asking for about 29,400 rubles.
What is the difference between the HDX T18?
The propellers of the outboard motor presented are quite durable. In this case, the gears are located directly near the central shaft. They are able to withstand a large load due to hard clamps. The anode of this outboard motor is located on the back side. Mounting at the gearbox is provided by the manufacturer reliable. If we talk about the shortcomings, many buyers complain that there is no way to change the position of the central stock. The rest of the claims on this model from the owners have been reported. This modification is worth about 29,400 rubles today.
Features of the HDX T99 device
An engine with a total power of 4 kW is installed in the presented outboard motor. It is classified as three-stroke and has a limit frequency of 4 Hz. The propeller in this configuration is mounted on the skeg. The rear gear of this model is provided by the manufacturer rather voluminous. It should also be noted that a special water pump is installed in this outboard motor. Due to this leak, he is not afraid. The central shaft of this instance can be adjusted. At most he can make more than 3500 revolutions per minute. If you believe the feedback from consumers, then in use this outboard motor is very comfortable.
The outlet valve of the presented specimen maximum pressure is able to withstand about 5 bar. Gearboxes in the outboard motor break down quite rarely. Of the shortcomings, only the quick wear of the pushers can be noted. In this regard, it is advisable to periodically inspect them. If you believe the reviews by the owner, then this action does not take much time. This model will cost about 32,100 rubles in the store.