It’s quite possible to make tricycles with your own hands . Such models are popular among people of venerable age, can be used as simulators that stimulate the work of muscles and heart. In addition, such machines are characterized by increased stability, they allow you to transport a certain load without the risk of falling. Consider the features of the unit and the stages of its independent manufacture.
Benefits
Having decided to make a tricycle with your own hands, get acquainted with its advantages, in comparison with analogues on two wheels:
- Any person can use such transport, regardless of age, financial situation and physical fitness.
- Making a model yourself will not require special knowledge and significant capital investment.
- DIY tricycles made or bought in a store are much more stable on the road.
- During operation, equilibrium is not required, and this is a very significant factor for the elderly.
- The model is equipped with a low frame, which facilitates the landing of the rider.
- The high carrying capacity of the unit allows its use for commercial purposes.
Where to begin?
To create a do-it-yourself adult tricycle, you will need to purchase a two-wheeled model of domestic or foreign production. Depending on the chosen modification, the aesthetic side of the future vehicle will be determined.
It is not necessary to rely only on the quality of parts during the work. The basic rules must be observed, namely:
- Calculate the height of the model so that the owner is comfortable sitting on it.
- Check the stability of the sample so that it does not fall over with a sharp turn of the steering wheel.
- The new cycle machine should be equipped with a reliable brake system and an alarm bell.
- It is better to mount new pedals and wheels, which will avoid slipping and slipping.
- The steering wheel and wheels should rotate smoothly without making extraneous sounds.
Features
The most significant point when creating your own tricycles is the need to modify the frame. This will require reinforcing the metal core using profile ribs.
One of the simplest and most economical ways to create such a design is the use of a frame from the Urals. You will need to cut the rear fork, install a new frame from duralumin pipes. The second element is mounted below the seat. This will allow you to install a container for transporting goods. The wheels connected by an axis are installed on both sides, and an asterisk adapts in the center.
The dimensions of the frame in the manufacture of a tricycle with your own hands can vary, depending on the creative ideas of the designer. The most reliable and fastest in terms of production technology of the model in question is considered to be the use of a rear factory bridge with a UK-65 differential.
Bridge installation
The assembly order of this element is not particularly difficult, since it fits almost all classic frames. The work is performed in the following sequence:
- First, all the regular elements of the rear part are dismantled, including the standard chain, wheel, wing, trunk and hand brakes.
- Then, a UK- type bridge is installed on the native rear wheel seat. In this case, the stops are wound on the lower tube of the rear of the frame, the axis is threaded into the eyes. All parts are tightened, the stops are attracted with clamps.
- Next, a new circuit is mounted, which is longer than the usual counterpart. To do it, you need to buy two full-time chains and fit the element to the desired size. To remove excess links, use the method of grinding the rivet or installing a new lock.
- It remains only to configure the speed switch.
As you can see, tricycles with your hands are not such an overwhelming task.
Brake system
The assembly of equipment can be considered complete. However, you should pay attention to the brakes. The fact is that only disk elements are suitable for such a modification, it is not possible to install the rim version. This unit will require certain investments, but it will protect the cyclist and will please reliable operation. In addition to the disks themselves, the kit purchased includes hubs, calipers, brake lever (located on the steering wheel).
Tools and materials
To make a tricycle with your own hands, you will need to stock up on certain materials. These include:
- Old donor bicycles.
- Steel frame.
- Plywood.
- Body kit.
- A pair of wheels, preferably 20 inches in diameter.
- Square profile blank.
- Saw the "Bulgarian".
- Welding unit.
- A hammer.
- A set of keys and screwdrivers.
- Drill and hacksaw.
What will you have to spend money on?
When creating this modification yourself, you will need to consider the cost of acquiring the necessary parts. In specialized stores you can easily find the right material. The main part that allows you to transform a two-wheeled bicycle into an analog with three levels is the UK-6S bridge (or its analog). The average cost of a part is about 25 thousand rubles. In addition, without fail, you will have to buy an additional chain, gearshift, wheels and a set of stars.
As a result, the future owner will be able to independently construct a model without significant financial costs, as well as choose an individual external design that gives the cycle machine originality. With proper work, the equipment will delight the user not only with comfort, but also with reliability.
Finally
In order not to spend in vain the work on creating the unit under consideration, it will be necessary to draw drawings of a tricycle. With your own hands it will be much easier to make it in this case.
Having studied these tips and choosing the right tools and material, you will get a reliable housekeeper who does not require fuel, is stable, has a good load capacity and original design.