The country greenhouse "2 DUM" differs in simplicity and quality. The design department of Volia has developed a number of new models. Advanced greenhouses combine all the best characteristics of world standards. The modernized greenhouse frame was provided not for film coating, but for polycarbonate. The thing is that other country greenhouses have a small area, wide swing doors, and there are no windows. And the greenhouse country house “Dum 2” is larger and larger in comparison with the others, and there are also doors with windows. To all this, a reinforced frame was added to it, able to withstand even very severe frosts. Technical specifications provide for high gusts of wind up to 18 m. S., As well as up to 10 cm of snow without support by additional means. According to the summer residents, the harvest in such greenhouses always pleases the eye. Size of the greenhouse: length - 4-14 m, width about 3 m, height 2 m. Inside the country greenhouse is equipped with three very strong struts for rigidity. They are installed where polycarbonate sheets are joined. This model of the greenhouse is in great demand, given the snowy winters in recent years. Greenhouse "Country 2DUM" - a great option for growing cucumbers, peppers, tomatoes and eggplant.
The main advantages of the model
Country greenhouse "2DUM" has a number of advantages over other models.
- The size of greenhouses depends on the wishes of customers. With the help of extension inserts, you can change it.
- Frames are sold disassembled, which allows you to transport greenhouses using a car.
- Due to the galvanized greenhouse frame, the structure will be protected from corrosion.
- Does not require additional equipment for mounting the frame.
- To fix the frame, they dig in the T-shaped ends, due to this, you can do without a foundation.
- The greenhouse "Dachnaya 2DUM" can be mounted without much difficulty on its own with little experience, since each part is numbered.
- Arches of the greenhouse have openings for automatically opening window leaves.
- Due to the distance of 50 cm between the arcs, the structure becomes more durable. If desired, you can additionally purchase reinforcing arcs.
The greenhouse "Dachnaya 2DUM" is not without drawbacks, however, reviews about it suggest that with the ratio of price and quality in the current market it has no equal. This greenhouse is one of the best options for growing various garden plants.
Complete set of the greenhouse "Country 2DUM"
For the arched frame, a galvanized profile having a thickness of 0.8 mm is used. The greenhouse is covered with modern polycarbonate 4 mm thick. Cellular coverage allows the sun to scatter so that all parts of the plants are illuminated. The cottage greenhouse "2DUM" is equipped with a proprietary sealant and detailed assembly instructions. The difference between cellular polycarbonate and film and glass coatings is that it has a special heat-insulating layer designed to preserve thermal radiation in the greenhouse .
Assembly
To do this, you will need nut screws. Polycarbonate is mounted only once, in winter it is not removed. Assembling the Greenhouse "Country 2DUM" can be done alone, but it is not very simple. If possible, it is recommended to use the services of collectors. It takes two days to assemble the greenhouse alone. In some cases, you have to spend a week on installation, since the instruction contains a lot of professional concepts that are not so simple for an ordinary person to understand. The main difficulties arise during the installation of doors. The most difficult stage of work is their installation using special rubber bands. The packaged design weighs from 65 to 130 kg. The main volume is occupied by polycarbonate sheets (5 pcs.). The number of packages supplied - 5 pcs.:
- Direct frame details with instructions.
- profile with seal.
- End fragments.
- Arcs.
- Clips and accessories for installation.
Polycarbonate is cut for windows and doors. This additional service can be ordered for further convenience. A typical kit contains mounting material, a profile, and chopped polycarbonate to cover the side walls as well as the roof. Installation should be carried out from the ends of the greenhouse, because they have a margin. Then you need to trim the excess with a knife.
Lighting
An important issue for greenhouses is lighting. Light and heating are provided by powerful lamps with reflectors. For rapid growth, plants need light waves, but not those that the human eye captures. Certain lighting has a beneficial effect on the development of shoots and fruit set. If you equip the greenhouse with fluorescent lamps that are screwed into the fixtures, then fairly comfortable conditions for all plants will be observed. You can also install high pressure sodium lamps , which have photosynthetic radiation and have a special effect on plant growth activity.
Improving the in-house industrial model
Many summer residents are convinced that the greenhouse country "2DUM" can perfectly do without a foundation. The attached instructions contain information that there is no need for its manufacture, since the frame must be held directly by arcs. However, experienced summer residents know that the soil provides seasonal shrinkage, so the greenhouse should have a more reliable foundation. To do this, they undertake the following:
- Before burying the ends in the ground, a bituminous solution or anti-corrosion paint is applied to the bottom of the greenhouse.
- The frame is installed on a corner made around the perimeter. This will avoid due to the increased height of some troubles.
Greenhouse "Country-Arrow"
This greenhouse is maximally adapted to cold and harsh winters. Thanks to a special design made of powerful galvanized metal profile, the “Country Arrow” can withstand a load of up to 700 kg. The arrow-shaped form of the greenhouse makes snow roll. The height of the polycarbonate frame is ideal for growing high crops, and the width allows you to equip two beds at once.
The foundation is not required for the greenhouse, since fixing into the soil is carried out by digging in the T-shaped ends of the frame. Assembly is done with screws and nuts.