In the stores there are many modifications of polyvinyl chloride. In order to understand this issue in more detail, you need to consider specific boats. It is also important to note that they can be made independently. All this can be found in the article.
Motor catamarans for fishing are distinguished by a rigid base. Frameworks in models are often made of aluminum. On average, the mass of an inflatable boat does not exceed 20 kg. In turn, the capacity parameter is at the level of 300 kg.
DIY model
Making catamarans for fishing under the motor with your own hands is quite difficult. First of all, the frame is being constructed. Next, cylinders are installed on the sides. Many experts recommend the frame to be made of duralumin. It is more expedient to select a support of small height. On average, the length of the cylinder should be no more than 380 cm. Polyvinyl chloride for this purpose should be selected high density. After installing the cylinders, the balloon is attached. For this, stretch marks are used. You also need to install a valve to inflate the boat. The last thing they put is a stringer and seat boards.
Description of models with a flexible locker
Inflatable catamarans (PVC) under the motor with a flexible locker are quite common. In this case, the boom is used of a small thickness. Modifications made of polyvinyl chloride are most often presented on the market. The air valve in the devices is located at the stringer.
On average, the density of the material does not exceed 800 g. per sq. meter. The advantage of these boats is the ability to install large cylinders. The mount is a cross type. It costs an average catamaran (PVC) under the motor in the region of 55 thousand rubles.
Description of catamarans with a hard locker
Shallow locker boats are often used for fishing in shallow water. The most common models of polyvinyl chloride. In this case, two supports are installed. Directly the cylinders are fixed on the sides of the stringer. In some cases, you can find modifications with ballers.
Their air valves are located above the boom. On average, the density of the material does not exceed 700 g. per sq. meter. Supports for models are mounted above the firmware. Patches are often used rubber. An average catamaran (inflatable) costs about 50 thousand rubles under a motor with a hard locker.
Features models for two beams
Modifications for two beams are in great demand. However, it should be borne in mind that only double models are available on the market. Their carrying capacity does not exceed 300 kg. Supports are most often set to a small height. The length of the boat does not exceed 340 cm.
Stringers are often used with a thickness of about 1.3 mm. The patches on the models are located directly on the cylinders. Double modifications can also be made with flexible lockers. Thus, the nose is considered more protected. Mounting on catamarans is done through crosses. You can buy a boat in the store for 55 thousand rubles.
Three Beams Catamarans
Models with three beams are often produced in four-seater type. Their carrying capacity is approximately 500 kg. Lockers are most often used with little stiffness. However, there are modifications to the two pillars. Catamarans with two cylinders are most often sold on the market. It is also important to note that the width of the boat does not exceed 130 cm.
Air valves for these models are located near the stringer. Air filling time does not exceed 10 minutes. The firmware is most often used in high density. Some boats have a rubber boom. These models can last a very long time. You can buy them at a price of 45 thousand rubles.
Low Support Models
Models with a low support allow the installation of low-power engines. They are made for two and three cylinders. It is also important to note that in stores there are models with stringers. On average, the carrying capacity does not exceed 300 kg. Cylinders are mainly used in small diameters.
Some modifications use ballers. Stringers in this case are fixed on a polyvinyl chloride pad. Geeks can be made of rubber. They differ in width. You can buy a boat with a low pore at a price of 50 thousand rubles.
Description of models with high support
Boats with high support are designed for the installation of powerful motors. The length of such models exceeds 400 meters. It is also important to note that the cylinders are used with a large diameter. Lockers are mainly used with medium hardness. There are both double and triple modifications on the market.
Supports in this case are used with a stretch. Stringers are typically installed with a thickness of about 1.4 mm. The density of the material in such modifications is 800 g. per sq. meter. Frames are made only from duralumin. You can buy boats in stores for 60 thousand rubles.
Catamarans Taimir
These catamarans are very popular. In this case, the load rating is 450 kg. The geeks of the model are used with overlays. Patches are located on cylinders. The total length of the catamaran does not exceed 350 cm. The model has a stretch on both sides. Firmware is used dense, oars are included in the standard package.
It is also important to note that the fastening of the boat is done through crosses. The density of the material is 780 gr. per sq. meter. You can buy this catamaran at a price of 56 thousand rubles.
Models "Rotan"
These Rotan motor catamarans are sold with a flexible locker. In this case, four places are provided. The support is a short distance from the frame. The total weight of the catamaran does not exceed 22 kg. The firmware is used medium density.
The patches on the models are located at the bottom of the cylinders. It is also important to note that these modifications use ballers. There is a rubber stringer, and its thickness is 1.4 mm. You can buy these catamarans in stores at a price of 45 thousand rubles.
Description of the Delta 300 catamaran
These motor catamarans for fishing are made with hard lockers. The main advantage of the boat is considered to be strong supports. The carrying capacity fluctuates around 500 kg. This catamaran is designed for four passengers. Geeks are used to protect the bow of the boat. They are made of rubber, are flexible.
At the back of the catamaran there is a banner with firmware. Buller is applied with a wrap. The oars are included in the standard model kit. The density of the carcass material is exactly 700 g. per sq. meter. The width of the cylinder is 46 cm. The frame is fastened through crosses. You can buy a model for 45 thousand rubles.
Features of the Delta 350 models
These motor catamarans for fishing are characterized by a high density of material. The specified parameter averages 560 gr. per sq. meter. This boat is made with two beams. They are installed next to the supports. Sturdy racks are provided for the seat. The specified catamaran is designed for four passengers. It is also important to note that this model has a solid boom. It is made of polyvinyl chloride. Stretch marks on the model are installed above the beams.
The stringer itself is used with a small thickness. Buller in the presented catamaran is absent. Oars are included in the standard kit. In total, the device uses one air valve. Duralumin is not used on this model. Also worth noting is the large diameter of the cylinders at 46 cm. You can buy this catamaran for 47 thousand rubles.
Catamarans "Delta 380"
Many consumers like these catamarans for fishing under the motor because of the tight cylinders. Their diameter is 50 cm. The density of the material is 560 g. per sq. meter. The boom of the model is on cylinders. It is also important to note that she uses rubber patches to protect the coating. Buller is applied with a wrap.
The bow of the catamaran is protected by a stringer. Oars are included in the standard kit. The frame is fastened via crosses. The width of this catamaran is 156 cm. The support of the model is low, so you can install a low-power motor. You can buy this catamaran for 52 thousand rubles.
Buster Models
These catamarans (PVC) under the motor for fishing are in great demand. However, it is important to note that this model can only accommodate four people. A boom in this case is not provided. The patches are made of rubber. Stretching in the catamaran presented is located on the cylinders.
The total length of the model is 430 cm. The stringer is used with a small thickness. The density of the material is on average 780 g. per sq. meter. In total, the catamaran has two air valves. You can buy a model for 57 thousand rubles.