In the summer, all teenagers go outside, gathering in large companies to have a good time. Of course, conversations alone will not be enough for a decent rest, so in the parks you can see many scooters, rollers, skateboards, with the help of which all kinds of tricks are carried out. Quite a few people know how to make an allie on a skateboard. For beginners in this matter there are many difficulties.
A beginner skateboarder first needs to learn how to stand well on the board, and only then begin to study various tricks. The article will tell you how to make an ollie on a skateboard - a basic trick that all owners of skateboards and fingerboards should learn to do. As soon as such a combination is mastered, other tricks will immediately become available, because they are based on "allies".
Allie trick
Before theoretically learning how to make an allie on a skateboard for beginners, you need to understand what the trick is. When it is performed, a skateboarder rises into the air with the board, absolutely without using his hands. At first glance, it is unlikely that it will be clear to beginners how to make an rally on the skateboard, which impresses everyone around.
Back in 1978, Alan Gelfand was able to make a jump in the ramp, not using his hands, but working only with his body and legs. That is how the first "allie" appeared. And the first street stunt was shown by a skateboarder named Rodney Mullen in 1983.
The high stunt "ollie" looks very beautiful and interesting, so every beginner seeks to learn how to do it as quickly as possible. There is one technique for doing the jump, but each person can slightly change it, spreading their legs wider or narrower.
Below you can learn more about how to make an rally on a skateboard for beginners. It is clear that just so it will not succeed. For a successful trick, you need to learn the theory and do everything in accordance with it.
Overclocking
The first step in doing the basic trick is overclocking. Before you make an ollie on a skateboard, you need to speed up a bit, because on the go the jump is made much easier than from the spot.
The leading leg must be positioned in the middle of the board or slightly moved towards the front bolts. The second leg (push) is required to be placed on the tail of the deck. Having found a comfortable position, you should bend your knees slightly. When your legs get used to this position, you need to concentrate and prepare for the jump.
Click
The most important point, without which the trick cannot be done, is called a click. It represents a sharp push or pressure of the feet, which is behind, on the tail of the board (tail). This movement must necessarily be sharp, otherwise the skateboard will not be able to fly into the air.
As soon as a sharp pressure is made, the skater along with his board starts to rise up, quickly pushing off from the surface of the earth. This movement is very much like a normal jump on one leg.
It is necessary to push off exclusively with a jerked foot (the one that is on the tail of the board). The leading leg, located in the middle of the deck or near the front bolts, must carry out a pulling movement, which is described below.
If all the actions are performed correctly, the bow of the skateboard will rush up. It is at the second stage that it is necessary to learn that the height of the subsequent jump depends on the strength of the click. But you should be careful when pressing the back foot on the end of the board, so as not to accidentally break your own vehicle.
Cooker hood
At first glance it seems that the most difficult movement is a click, but in fact the future trick depends not only on it, but also on the hood, and, therefore, the third stage will not be easy.
When the front of the skateboard is pointing up and the tail is off the ground, you need to start pulling your board. The hood is called the second most important element of the stunt "ollie". The combination is an up-and-down movement, which is carried out by the front (that is, the leading) leg curved inside the foot along the influenza (top cover) of the skateboard.
It is due to this movement that the skateboard and its “driver” will rise into the air. Without a hood it’s impossible to make an allie. If you correctly click and rise high in the air, but without stretching the board with your leading foot, you can simply break the skateboard when it lands on the ground, because a fragile deck will not withstand a collision with a hard surface.
Flying and landing
The final step that brings the skateboarder closer to the full trick is landing. It must be mastered already after it turned out to do the right click and pull out the board.
Each owner of this vehicle dreams of accelerating faster than the wind, a sharp click, exhaust and hovering in the air. This picture looks especially good if the jump is made through a twenty-step span. All this looks, of course, cool, but without knowing how to land correctly, unusual steepness can easily turn into a broken board, torn ligaments, fractures, cracks, tucked feet and other troubles.
In fact, there is absolutely nothing complicated in landing on earth. You only need to place your feet in the area of the bolts, which will nullify the chances of breaking the board in half. In addition, during the flight it is necessary to control your center of gravity - it is best to transfer it to the center of the skateboard. In this case, it is not necessary to deflect the body of the body forward or backward, because in this position the board can fly out from under the legs.
Conclusion
It should be understood that before you make an “allie” on a skateboard, you must mentally prepare yourself for failure. The first time you make a jump is quite rare, so many newcomers with each new attempt earn additional abrasions, injuries and so on, but with them they gain experience.
The only good way to do an allie is to try and try, even if you can't do it for the tenth time. The longer the practice, the faster you can learn new tricks.
Now that you know how to do an ollie stunt on a skateboard, you don’t have to hesitate - it's time to start practicing!