The production of boats "Killer Whale" is engaged in the Russian company "Poseidon". To date, many models are presented in stores with motors that are made of PVC, rubber and plastic. In power they are quite different. Cockpits, as a rule, are installed on 2000 mm. Cylinders are used in various diameters.
Directly bays can be three or four. In the assembly, the plastic boat "Killer Whale" on average weighs about 50 kg. It will cost around 50 thousand rubles. In order to understand this issue in more detail, one should consider the main types of boats.
Boat types
The boats of this company are made of rubber, PVC and plastic. Also, boats are divided by engine power. Today the company presents models for 10, 12 and 15 hp. They are also divided by the type of deadwood. There are devices with and without a latch. The density of the material models are different. On average, this indicator fluctuates around 1000 g per square. meter. Pallets for models are available with insulation, as well as without it.
10 hp models
The company produces 10 hp models with various cockpits. In this case, the width of the boats is on average 1,500 mm. There are two models of cylinders directly. Their diameter averages 430 mm. There are four airtight compartments in the device. Weighing rubber boat "Killer whale" at 10 hp in the region of 45 kg. Pushers for models are used conventional. Some modifications are equipped with a clamp for convenience. If we talk about the motor in these configurations, then quality fuel pumps deserve attention. Starters are installed well, and latches in all models are available.
12 hp boats
12 hp boats available in different densities of material. In this case, the transom height does not exceed 390 mm. In this case, the cockpits are on average 1,500 mm. The diameter of the cylinder, in turn, is 450 mm. If we talk about the parameters of the engines, then the fuel pumps in the models have two valves. Holders in the devices are installed standard. If you believe customer reviews, then the stock angle of attack they have provided. In this case, deadwood can be adjusted if necessary.
15 hp models
Modifications to 15 hp made with 1600 mm cockpits. In this case, the height of the transom is on average 340 mm. Cylinders, in turn, are used with a diameter of about 430 mm. If you believe customer reviews, the density of the material is quite high. Deadwood in all configurations, the user is able to adjust. If necessary, you can pick up a boat with anticavitacin stove. The rods in the devices are used in different diameters.
Killer Whale 335 Model
The length of the boat is 3350 mm. The direct density of the material is 1100 g per square. meter. The transom height of the model reaches 395 mm. The length of the cockpit is only 2300 mm. The model has two cylinders, and their diameter is 430 mm. The maximum load capacity of the model does not exceed 450 kg. Four people can fit in the boat presented. There is a model in the market of 43 thousand rubles.
Opinion about "Killer Whale 335"
These Killer Whale boats get good customer reviews. First of all, they are appreciated for their spaciousness. In this case, the pallet is quite durable. Also, experts note the high quality of the valves. For fishing and recreation, this boat "Killer Whale" is ideal.
The kit includes quality oars and oarlocks. Flooring in this case is pretty hard. The pump in the standard set has a regular one. A bag is provided for convenient boat transportation. Also, many people appreciate the model for a reasonable price for the goods.
Options
The motor boat "Killer Whale 365" is produced with a length of exactly 340 mm. In this case, the cockpit is available at 2300 mm. The actual width of the model is 1510 mm. There are two cylinders in the design, and their diameter is 430 mm. There are four airtight compartments at the boat. The load rating of the model is 450 g. In assembly, it weighs exactly 51 kg. If we talk about the transom, then in this case it is available at 390 mm. Today the boat costs about 55 thousand rubles.
What do they say about Killer Whale 365?
This boat "Killer whale" PVC has good reviews from the owners. This is primarily due to the high load capacity. She holds four people perfectly. It is also important to note the high density of the material, which is 1100 g per square. meter. In this case, the bottom is provided with a seal. The engine itself is set to 10 hp. Deadwood is easily adjustable.
If you believe the opinion of buyers, the fuel system is installed quite high quality. The propeller shaft allows you to reach maximum speed very quickly. The gearbox at the boat is located near the pallet. There are three valves in the beam, the model has a thermostat. Directly the boat connector is installed. Also, many owners were pleased with the quality of the retainer. For fishing, this model is suitable.
Description of the killer whale 385 Sport
If you believe the documentation for the boat, then its length is 3250 mm, and the width of the whole 1560 mm. The transom height of the model reaches 380 mm. The cockpit is provided for exactly 2300 mm long. In total, the model has two cylinders with a diameter of 720 mm. There are three airtight compartments. If we talk about carrying capacity, then this parameter is at the level of 450 kg. In turn, the engine power reaches 12 hp. An anti-cavitation plate is provided for this model.
The gearbox in this case is located under the pusher. The bottom of this model has a gasket. The yoke is installed at the boat on three valves. There is a clamp of adjusting type. At the same time, if desired, the stock can be put on the lock for convenience. The indicated boat "Killer Whale" is in the region of 48 thousand rubles.
Consumer reviews for the Killer Whale 385 Sport
Many owners praise this boat for a quality engine. However, it has other advantages. First of all, this is a great pallet. In this case, the seal is installed between the cylinders. Directly, the density of the material reaches 1200 g per square. meter. The boat is capable of transporting four people. If we talk about the engine, then a quality deadwood deserves attention. He is able to serve for quite some time. Swing lock for the model is available. Also, the owners were pleased with the robust gear housing.
A review of the Killer Whale 385 Marine
This boat "Killer Whale" has a length of 3300 mm. If we talk about the mass, then in assembled form it is equal to 52 kg. Directly, the density of the material reaches 1200 g per square. meter. The pallet in the presented model is used without a seal. The maximum engine power is 15 hp. The capacity of this model is four people. Payload - 450 kg. There are three sealed compartments in the configuration.
The model has two cylinders, and their diameter is 430 mm. The cockpit is provided by the manufacturer with a width of 710 and a length of 2300 mm. If we talk about the engine, then the deadwood of this model has an adjustable type. The rocker is mounted directly on three valves. There is a tilt lock at the boat. A tiller is also provided to adjust the position of the connector. There is a model on the market about 55 thousand rubles.
Reviews about the model "Killer Whale 385 Marine"
The boat "Killer Whale 385" reviews from consumers basically deserves good. First of all, the model is valued for a quality pallet. Despite the absence of a sealant, the material can withstand large loads. Engine power 15 hp allows you to travel long distances. The cylinders of the model are designed for high load capacity.
If you believe the customer reviews, the starter used is pretty high quality. A standard camshaft is used directly, but problems with it rarely occur. The boat is driven without any problems. In this case, the height of the transom is as much as 390 mm. Pushers in the presented configuration are absent. However, a reverse gear lock is provided for the engine.
An excellent gearbox also deserves attention. There is an anti-cavitation plate in the boat presented. If desired, the position of the deadwood can be adjusted. For fishing and just relaxing this boat "Killer Whale" is perfect.