When the manicure is in order, the woman feels confident. How unpleasant it is to suddenly find chipped varnish on the tips of the nails! To keep the coating for a long time, you should seal the ends of the nails. This will extend his life.
In applying gel polish it is very important to adhere to the technology. But many, even having done everything correctly, after a few days notice the cracked or worn off ends of the coating. What is the matter? How to seal the end of the nail with gel polish so that it lasts a long time? It turns out there is a special technique for this operation.
The article will discuss common mistakes when performing the coating and give recommendations from specialists for those who have poorly worn gel polish.
Materials and Tools
When the question arises of how to seal the end of the nail with gel polish, you should remember about the correct use of tools and materials. When preparing nails, the length is filed and the desired shape is attached. Often this is done with a 180 grit file. After this treatment, microscopic notches form on the end of the nail. If you do not smooth them out with subsequent treatment with buffs with a grit of 240, this can lead to a quick cleavage of gel polish from the tips of the nails. But this is not the only mistake.
Everyone knows that you need to seal the end when applying gel polish. But only professionals understand how important it is to apply each coat. Even with dehydrator and primer. These materials are almost always not taken into account by amateurs when coating is done. But the nail has a thickness. Why is the end face ignored during processing ? This is wrong.
Often, when sealing short nails, the material gets on the skin, which leads to subsequent detachment. Knowing this, some remove excess material after polymerization using a file or a milling cutter. This is correct, but just do not forget to re-apply the layer carefully and polymerize it. It is most convenient to do this before applying the top.
Execution technique
There is a certain technique for sealing the end of the nail. It was not opened with the appearance of gel polish, this is a well-known method of coating nails with ordinary varnish. She is studied in manicure schools.
How to seal the end of the nail with gel polish:
- The brush is lowered into the bottle and squeezed well on the neck. It should be semi-dry.
- The brush is held at an angle of 45% to the end of the nail and is drawn along it with the very tip, one or two hairs.
- If gel polish gets on your skin, immediately remove it with an orange stick.
When applying the coating, sterility must be observed. This means that no organic matter should get on the nails. This affects adhesion. Therefore, the masters work in masks and gloves. And, of course, excess material should not be removed with a fingernail. For this there is an orange stick. In particularly difficult places, you can use it by dipping it first in an alcohol-containing liquid - a disinfector.
Instructions on how to properly seal the end of the nail with gel polish
After the manicure and giving the nails the desired shape, the sequence of actions is as follows:
- They process the nails with buffs, not forgetting the end face.
- Wipe the nails with alcohol-containing liquid - a disinfector.
- Apply a dehydrator, process the end face.
- Apply a primer, process the end face.
- Put the base, seal the end, dry.
- The first layer of gel polish is applied, the end face is sealed, and dried.
- Repeat with a second coat of varnish.
- Apply top, seal, dry.
As can be seen from the instructions, it is very important to seal each layer. There are different designs in which there may be more layers. The rule does not change.
Why sealed gel polish does not hold
It would seem that sealing the end of the nail with gel polish was done according to all the rules. But chips still appeared. Why did this happen? Because the rules for wearing artificial turf were not respected. No matter how well the end face is sealed, any coating is powerless before exposure to abrasives.
The constant effect on the ends of the nails when typing on the keyboard, playing musical instruments or washing dishes without gloves leads to a thinning of gel polish on them. In the end, the coating in places completely abrades, which leads to chips. Washing dishes can be advised with gloves. And for those who have a profession that is traumatic for gel polish, it is better to do strengthening before applying gel polish.
How to seal gel polish on problem nails
On thin, soft nails, the coating does not hold well under mechanical influences. You should first strengthen them, and then close the ends of the nails with gel polish. To strengthen, a rubber base is used, which is applied according to the principle of a modeling gel: a longitudinal arch is formed by turning the arm over.
Another way to strengthen is to add acrylic powder to the base . Such nails will be hard and strong. After strengthening, perform the entire sequence of applying gel polish, as usual.
Expert Advice
The improper position of the hand in the lamp during the drying of the gel polish leads to the fact that it is not uniformly polymerized, becoming brittle in certain areas. Therefore, you should check how the hand rests in the lamp. If the fingers are not strictly horizontal in it, and even look down a little, the ends will not dry out properly.
The photo, how to seal the end of the nail with gel polish and properly dry in the lamp, shows the correct position of the fingers.
It is very difficult for non-professionals to apply gel polish on the end of the nail with a thin layer. To prevent thickening of the material at the tips, the brush is wrung out well and barely touches the nail when sealed.
There are complex tones that require special application techniques. These are pastel colors that often lie in stripes. Trying to fix such a flaw, amateurs apply layer by layer to block the defect. This results in too much volume at the tips of the nails. You should study the technique of applying pastel and nude coatings, then you will not have to be mistaken.
Conclusion
If you observe sterility and technology, and most importantly - know how to seal the end of the nail gel with varnish and not expose the coating to mechanical abrasion, it will be worn for a long time.
Consistent leisurely application of gel polish in compliance with all the nuances is the key to high-quality manicure. Try it and you will succeed.