For all lovers of fishing on a feeder, the question will probably be interesting: how to make a feeder tackle and how to assemble it? After all, there was always a huge risk of losing several feeders, which were always one of the main consumables. Do-it-yourself feeder tackle is a saving and a lot of pleasure from the work done.
To significantly reduce the cost of your favorite fishing, you should try to make tackle for the feeder yourself. We will talk in more detail about how to make and how to assemble a feeder gear with our own hands:
There is a very simple method of making feeder gear: first you go to the nearest hardware store in your area and buy a direct metal suspension there (it is usually used to fasten gypsum cardboard). You will also need to take small accessories for mounting a feeder and a lead plate.
You will also need such materials:
- The fishing line is about 0.2 or more, but in no case is thicker than the main;
- Swivel carabiner (take the whole package).
The following method for making feeder feeders may initially seem very complicated, but you won't need any supernatural technology. There are many craftsmen in the country, and this method is also for those who are not afraid to take tools into their own hands.
Do-it-yourself feeder gear is made as follows:
1.First we take a piece of fishing line with a length of both hands (the diameter should be slightly larger than the leash with a hook), fold in half in half and make a knot, you can double. Before this, we retreat from the bend by a couple of centimeters. Here we will fasten the leash with a hook.
2. Both ends of the fishing line must be parted in opposite directions, holding with the help of a loop in the middle, we begin to twist in different directions.
3. The fishing line should twist like a pigtail.
4. We fix the obtained pigtail with a knot, preferably double.
5.At any end of our fishing line we put on a snap hook carbine.
6. Make a big loop and fix it again using a double knot. Only the side on which the swivel is located should be slightly longer than the second (5-20 mm). We will make the loop on the feeder softer, which will allow the feeder to flow freely around any obstacles during fishing.
7. Cut one end of the fishing line, bend the other in half and fix it with a double knot.
Then we will hang it from the main fishing line by the loop.
8. All unnecessary fishing line ends can be cut.
Now we see that do-it-yourself feeder gear is very easy and several times cheaper.
In addition, a few tips: it is advisable not to leave any joints on the outside of the feeder during its manufacture, as this can lead to hooks on the grass cover, stones, tree roots or any of the items during fishing.
A self-made tackle has one significant advantage - it rises very quickly to the surface of the water when you fish on a feeder, this is due to the body of the manufactured feeder. The weight of the feeder feeder is adjustable using lead.
Another important advantage of self-tackle manufacture is that the center of gravity of the feeder is shifted, which in turn prevents rolling over during fishing. But if you put another feeder on the same swivel, then they will work in tandem even with a very strong current.
Do-it-yourself feeder tackle will greatly please not only you, in your hobby, but also your friends, whom you will take with you for fishing. After all, all the most pleasant and joyful, I always want to share with people who are close in spirit. At the end of the manufacture of gear, you can exchange experiences and talk about how to make feeder gear and how to assemble it. Do not doubt that fast enough, you will become a truly competent specialist in this matter.