Bicycles are quite interesting means of moving a person. In many countries, people with different monetary incomes use them, and it pleases. Models can be used on a variety of coatings. Thus, manufacturers have long been faced with the task of optimizing the design for comfortable movement on any surface.
It's no secret that developments in this area are still ongoing. Changing the various structural elements in bicycles led to their separation. However, two main types can be distinguished, namely road and off-road models. The first view, many are further divided into utilitarian and sports modifications.
Off-road bikes can be mountain, hybrid or cyclocross. However, the classification of models does not end there. Additionally, the separation occurs in the transmission, drive and design. Given all this diversity, you can understand why a person has a lot of questions before buying a bicycle. To understand everything, you should familiarize yourself with the strengths and weaknesses of one type or another in more detail.
Features of Utility Models
These types of bicycles are mainly equipped with baskets and the frames are open. Urban modifications of a utilitarian look are rather bulky and poorly manoeuvrable. Also note the greater rigidity of the plug. Freight models are quite common. The carriage in them is connected to the frame directly. Folding types of utility bikes are rarely seen on the street. Depreciation systems are not installed in them.
Sports bikes: subspecies and their features
The indicated types of bicycles, as a rule, are equipped with rudders in the form of a steering wheel. For high speed, the front frames are rigid. They are used most often of the closed type. The result is a high structural strength. Speed transmission systems are installed double. Pipes for the frame can be found in a wide variety of alloys.
If we consider highway modifications, then butted models are used there. Such sports bikes cost (market price) in the region of 13 thousand rubles. They are very simple and able to withstand heavy loads. Track bikes are known for their maneuverability. Their frames are designed in such a way as to successfully cope with the cyclic stress that is exerted on them. Such sports bikes cost (market price) about 15 thousand rubles. In turn, cutting models are very simple in design. Pipes are most often found in them of circular cross section. Ultimately, this gives them sufficient rigidity.
Touring models are also distinguished among sports models. They refer to special bikes that are used exclusively for racing on asphalt roads. Frames in them are most often closed. The mass of bicycles is on average small due to the small diameter of the pipes. Highways hybrids are considered to be the last type of sports bikes. Steering wheels they meet only straight. Such bicycles are rarely equipped with luggage racks. It should also be noted that they only have braking systems for the rear fork.
Off-road type
These types of bicycles are characterized by the presence of shock absorbing forks, and tires for riding are used with a special tread. Transmissions are most often used of the transmission type. By the type of suspension, off-road bikes can be rigs or hard tailors. The first subtype is distinguished by the fact that its bush is rather rigid, while hardtailors are more universal.
The suspension is installed with a medium-rigidity bushing on the rear fork. Bicycles with two grinders are rare. Some highlight softtails that are equipped with special feathers. Thanks to them, small bumps on the road are not felt.
Mountain bikes
These types of bikes are designed for cross-country riding. Some people call these models mountain bike. Their distinguishing feature is a reinforced frame. On average, tire diameters range around 25 inches. The most common subspecies of mountain bikes is considered to be ashanbayks. Frames in them are installed only closed type. In stability, they are pretty good due to the wide front fork.
The blocks of the rear sprockets are located close to each other. Thus, the compactness of such bicycles is good. Another subtype of mountain bikes is cross-country. These models are equipped with a long fork. In general, they are more designed for cross-country racing. The average cross-country bike will cost 20 thousand rubles. Another interesting subspecies of mountain bicycles is considered to be miners. They differ from other modifications in that they are equipped with wheels of different diameters.
Why are hybrids interesting?
This type of bicycle frame is usually open type. They are made by many manufacturers of carbon fiber. Hybrids are used to a greater extent for traveling on unpaved surfaces. High stability of the bike is ensured in them due to the “dual control” system. It consists in fast switching speeds. In this case, a sprocket skipping never occurs. Drives in hybrids are usually installed cross-type. The front sprockets are located behind the transmission clutch.
Cyclocross Bikes
This type is quite similar in design to road models. His frames are usually open. They are mainly made of aluminum. Tires in bicycles are used toothed type, and a variety of brake systems can be installed. Today, the most common are cantilever modifications. The tross drive is located on the steering wheel. Bicycle forks are of medium stiffness. Switching speeds through a coin.
How to choose a model for a child?
First of all, you should understand that bicycles for children should be safe. In this case, aluminum frames are best suited. Front forks for bicycles for children are selected based on the environment of use. For riding on an asphalt surface, it is important to select mechanisms with a flexible front hub. It will allow the bike to be more stable on the road with small bumps.
Alternatively, some are advised to consider folding models. In this case, the strength of the frame will be low. If we talk about bicycles for riding over rough terrain, it is important to give preference to modifications with a cushioning system. To date, the most common are spring-oil types. There is an average children's bike in the region of 9 thousand rubles.
Buying a bike for cycling
For cycling it is very important to choose a multi-speed model. Drives are usually mounted on bicycles. You should also pay attention to the depreciation system. For sports bikes, air-oil modifications are considered the highest quality. They are suitable only for double-sided forks. The pressure limit they withstand is quite large. Frames can be found open and closed.
Pipes are usually available with a circular cross section. The thickness of the metal in different areas may vary. As a result, the bike is able to withstand high static stress. Modifications with rear-wheel drive are quite rare. This is due to the fact that the maneuverability of such a bicycle will be low.
Bicycles for tourist trips
For tourist trips, it is very important to choose a durable bike with a reliable transmission. At the same time, folding modifications are considered by some in the first place. Drives most often choose a chain type. However, today the market is ready to offer various belt modifications. The most durable stars are those made of magnesium alloy.
The plug itself must be made of carbon steel. Such a bike will be quite expensive, but it can last a long time. To switch speeds, they most often use rotary mechanisms. However, you can find bicycles with triggers in which two coins are installed.
Sports bike "Start-highway"
The Start-Shosse bicycle from the Kharkov Bicycle Plant (KhVZ) is distinguished by its speed characteristics. He has an open frame. The plug is installed quite high, and its rigidity is at an average level. Wheels in the standard model include 32 spokes. The front and rear rims of the bike are absolutely identical. The frame at Start-Highway is made entirely of aluminum.
Wear-resistant parameters are pretty good. The cross-section of pipes at the bicycle is round. In addition, it should be noted that the thickness of their walls is the same in all areas. With a shallow vibration, the shock-absorbing system allows the bike to cope. The smoothness of the stroke is ensured by a quick gear shift. This HVZ bike is worth about 15 thousand rubles on the market.
Bicycle "Tourist KhVZ"
Bicycle "Tourist" at one time was very actively used in road racing. Its standard equipment involves the use of a frame with front-wheel drive. The mass of the bike is negligible due to the thin walls of the pipes. In the lower part, it is reinforced by an oval section. Bicycles "Tourist" can withstand static voltage. The Start Highway is generally quite similar to this model.
The steering wheel is adjusted using a swivel mechanism with a lock. The front hub is protected against dirt. Buttoned frames were rarely used. In early versions, seatposts connected directly to the carriage. There is a bike "Tourist" an average of 14 thousand rubles.
Sports model "Sputnik KhVZ"
The Sputnik bike features a small steering column. The front fork connection is screwed. The frame in this case is designed for one connector. A whole chain of joints is used for the bike's shock absorption system. Pipes in this modification come with a variable section thickness. The static voltage of this HVZ bike can withstand quite a lot. Connection with a glass is provided for welding.
The back of the triangle consists of two pairs of pipes. The carriage is connected directly to the seatpost. The parts in this bike are mainly made of magnesium alloy. The chain itself is partially composed of carbon fiber, cassette-type rear sprockets. The grip on this bike is good. In this case, smoothness is ensured by the grinder. The Sputnik bike costs about 15 thousand rubles.
Folding bikes for travel
Models of this type are considered quite popular. A folding bike can be used by both adults and children. Frames on it are most often found open type. Due to this, the compactness of the bike increases several times. Cable drives are installed mainly on the steering wheel. As the material for the frames, an alloy of molybdenum is used. It is absolutely not susceptible to corrosion and tolerates extremely low temperatures.
In this case, the fatigue of the metal will be low. Some modifications of folding bicycles were developed with rear-wheel drive. At the same time, blocks of sprockets were located only in the front. Models with cushioning systems are quite rare. At the same time, the front forks are mainly single-sided. The ride on bicycles is ensured by a coin. The front bushings are located on bearings of different diameters. Directly connecting the parts is provided screw. On average, a good folding bike will cost around 12 thousand rubles.
The bicycle for children with the Turbo Trike M53 handle
A bike with a handle is very convenient, and the drive is mounted in a chain type. His frame is made of aluminum alloy. The handle itself is made of alloy steel. There are no plastic parts in this bike. In terms of stability, this model is pretty good. Sprockets in this case are installed in the front part, for smoothness there is a grinder. A rotary switch is used to change the speed.
The control system in the bike is used "dual control". The manufacturer uses a spring-type cushioning mechanism. The front fork is wider for greater stabilization. The front and rear wheels are set to the same diameter. The cross section of the pipes in this case is round. You can adjust the height of the handle using a special mechanism with a lock. There is no need to use any keys. Also, the child can very simply set the steering wheel in size. This bike with a handle on the market is 12 thousand rubles.
Bicycles of the Stealth company
Stealth bikes are famous for their excellent transmissions. Switching speeds to them is pretty quick and convenient. At the same time, chain slipping is rare. Of mountain bikes, models with open frames should be noted. The brake systems in them are installed on two drives. The connection to the steering column is screw. Road bicycles of the specified company are equipped with an additional set of bearings to increase speed characteristics.
It should also be noted that many models are made with direct rudders. Frames, in turn, are open. Recently, this trademark presented utilitarian models for consumers. For freight transport, they fit well. The frames in them are butted type.
The wall thickness in this case varies in different areas. Depreciation systems are usually installed spring-oil type, with a system of special valves. Due to this, the fork becomes movable and the uneven surface does not cause problems. On average, there are Utility stealth bicycles in the region of 14 thousand rubles.
4-wheeled bicycles for adults
A 4-wheeled bicycle is usually produced on a chromium-molybdenum frame. Additionally, aluminum and titanium alloys can be used. Cushioning systems are used air-oil type. For their effective work, special cartridges are needed. Thanks to the seatposts, the static load can withstand a large load. Drives can be found both belt and chain type.
Braking systems are also installed diverse. A distinctive feature of such bicycles is considered to be a good grip on the surface. This is achieved through the use of grinders. They significantly extend the service life of bearings by relieving stress from them. Coins for switching speeds are rarely used. An average bike of this type costs around 21 thousand rubles.
Stroller bicycles for children (from one to three)
The company "Stroller" children's bicycles (from one to three years) produces the most diverse. The most popular today are tricycle modifications. First of all, they are distinguished by convenient connections. On all sides, they are pretty much protected and the child will be very comfortable in the bike.
The depreciation system, as a rule, is set to the usual - spring type. In turn, drives can be chosen between belt and chain types. The brake system is mainly installed in the rear of the frame near the ratchet. Carriages, as a rule, have a reliable connection and can last a long time.
Features Highway Hybrids
The main thing for road hybrids is the ride. Cassettes and rattles are not suitable for such purposes. Manufacturers produce the best bicycles with grinders. The front derailleurs are located at the bottom of the frame. Steering columns can be the most diverse, but the most common are direct modifications. The rims on these bikes are 23 inches.
Frames exist both open and closed. Saddle locks are installed above the verbs. The connection to the frame is via the seat post clamp. The front sprocket block is usually very compact. The offset for this type of bike is insignificant. In this situation, it significantly increases the sensitivity of the steering column. There is an average highway hybrid in the region of 18 thousand rubles.
How to choose a teen bike?
For teens, it makes sense to choose a bike among mountain modifications. They are able to withstand heavy loads, and an off-road tread will allow you to easily move on a dirt surface. The frame for such purposes is best chosen open type. At the same time, the sprockets should be made of carbon steel. Before buying, it is important to check the connecting rods for strength. Additionally, inspect the pedals.
. , . , - . - . ( ) 13 . .
- . , , . . . . .
. . . . . . . . .
, . . , . ( ) 15 . .