With the onset of cold weather, there are fewer and fewer people in open sports fields . Someone is afraid to catch a cold, someone is just too lazy to leave the warm room. But not everything is so scary. You can fully engage in sports in the apartment, even if it is small. We need a horizontal bar for the house, which is not at all difficult to manufacture and install.
There are a lot of varieties of home horizontal bars. For a large apartment, for example, you can make a three-dimensional horizontal bar with wall mounts. It will be better if the house is panel.
You will need a corner with a shelf size of 4.5 by 4.5 cm and a length of 3 meters, a pipe with a diameter of 25 mm and a length of one meter and a pipe with the same diameter of 60 cm.
We will do the horizontal bar in the garage, as we will need electric welding and a grinder. First you need to cut the corner into 6 equal parts of 50 cm. Next, lay out the corners in the form of an isosceles triangle, and begin to weld them together. Since we are preparing a horizontal bar for the house, we try to do everything neatly and beautifully. Having made the first workpiece, in the same way we prepare the second. Then we drill three holes in each corner. Through them we will fasten the horizontal bar to the wall.
After the workpieces are ready, proceed to their connection with each other by the prepared pipe.
The first pipe - 60cm is welded slightly below the middle to a corner opposite the corner intended for fastening. The second, one meter pipe, is welded to the ends of the triangles. The quality of the weld must be monitored strictly, to prevent slagging and not to skip. I think you yourself should know how to make a horizontal bar so that it is as safe as possible.
After welding, you can process the horizontal bar with sandpaper, eliminate burrs. The surface should be perfectly smooth. Then we color it in the color that you like best.
It is better to install the horizontal bar together, because the design turned out to be cumbersome, but rather reliable and thorough. This horizontal bar for the house will serve until you decide to remove it.
We make markings on the wall. It will depend on your height. The crossbar should be at a height that allows you to hang on it without touching the floor with your feet.
Using a puncher, drill holes with a diameter of 10 mm. Then we insert plastic plugs into them. After that, with the help of a partner, we fix our horizontal bar on the wall. Now you know how to make the horizontal bar your own hands and install it in the apartment.
There is a very simple option. It is suitable even for a small apartment. The main thing is that there should be at least one opening in it. You can purchase a finished telescopic pipe with an internal spring, or you can make a horizontal bar from a simple pipe.
We make blanks from strong material. It can be an aluminum or copper plate 10 mm thick, or a block of hard wood. We cut out two U-shaped workpieces and drill two holes in them. Then we process them so that they do not spoil the interior of the apartment. Now we fasten these plates on the jambs. Next, we install the horizontal bar in the opening, and fix the decorative pipes on top of the pipe, attaching them to the fasteners.
When installing a telescopic horizontal bar for a house, you just need to drill two holes in the opening corresponding to the ends of the pipe diameters. Since such a horizontal bar consists of two pipes and has a spring inside, it will not be difficult to install it. It is necessary to press on the thinner end of the pipe so that it enters the pipe of larger diameter. In this state, bring the horizontal bar to the holes, direct it and release the spring. Such a horizontal bar will not spoil the appearance of your apartment, and will be almost invisible. It can be practiced not only by children, but also by adults. After all, the doorposts are his support .
Now you know that making a horizontal bar for a home is not at all difficult.