Everyone knows that the maritime knot is one of the strongest knots. But not everyone knows what varieties of these ligaments exist, and there are many of them. To learn how to tie a knot, you should consider all its types.
The hitch unit is necessary at the moment when the load should be lifted, and the slings are not at hand. To create this bundle, you need a cable - steel or vegetable. The principle of operation of the node is as follows: when the load arrives at the end of the ovary, it is pressed against the hook, namely, to the inner neck. A loop that is tightened around the back fixes both ends. It should be understood that the root end of the node must pass over the chassis. In addition, the running end of the rope should be tacked to the root end. This is necessary so that at the most crucial moment he does not come off. By the way, it is possible to lift the bag without a cable using a similar unit. The button is then made so that the neck of the bag wraps around the hook once.
A cat's paw is used in those cases when the slings are attached to the hook so that there is no excess slack. How to tie a marine knot of this type? The loop of the sling should be placed on top of both ends, thus obtaining two not very large loops. Each loop should be twisted outward at the same time. The number of twists will depend on how much you need to reduce the line. Then the hinges must be worn on the hook.
A keg assembly is necessary to raise full and open barrels in a strictly upright position. A small knot should be tied in the middle of the cable. Half loops need to be torn apart so that they cover the barrel in the middle. One part of the loop should be passed through the bottom of the load, and those ends that remain free should be connected with a
direct knot. If one end remains free, then it should be secured with a
gazebo.The firing unit is necessary for piercing some strands of the cable, for leveling the eyelets and for performing a wide variety of work with canvas. How to tie a marine knot of a pile-like look? Such a node does not represent any complexity. One has only to understand that he must firmly grasp the subject.
In addition, the item should be pulled out of such a node very easily. With the help of such an ovary, it is possible to fix the mooring lines to the palms, as well as to attach special rope fences and build bridges.
The peg knot (in other words, “lamb leg”), got its name, due to the outward resemblance to the part of the animal of the same name. It is used if it is necessary to reduce the length of the cable for a while. In addition, if the strength of the cable is in doubt, then this
marine unit can be used
. The scheme of its creation is not too complicated to understand. But some points should still be considered. For example, do not forget that this ovary gains strength only when the load rises. In other cases, it can also be unleashed.
There are still many varieties of ovaries. If you want to learn how to tie a knot, you should carefully approach the study of each species. Not that the strength of the loop will be in doubt. Perhaps it is worth studying in practice what is a marine knot ?