Any fisherman wants to catch large fish. A donka for bream, made with your own hands, will help you easily solve this problem. This river inhabitant is not so rare in the reservoirs of our country. Catching it is not difficult. The most popular remedy for this is donka. This material is dedicated to its creation and the fishing process with its use.
What do you need?
Donka for bream is made without any problems even by a novice amateur fisherman. To create it, we need:
- A hank of fishing line with a cross section of 0.2 to 0.4 mm 2 .
- A weight of about 50 g.
- Set of hooks 5 and 6 numbers.
- Rod with reel.
- A metal bell or bell.
The cross section of the fishing line is best selected based on the transparency of the water in the reservoir of future fishing and the weight of the fish. The second criterion is more important. If the fish is large, then the cross section must be larger. The surface of the weight should be smooth. Otherwise, it can catch on the bottom, and the gear will remain there. The rod is selected based on your preferences. But it must be borne in mind that it must be strong enough, because with it you will need to quickly get the fish to land. Usually, fishermen use several gear at the same time. In this case, in order not to miss, a bell or bell is set. When the bream is hooked, the tackle will make a sound, and the fisherman will know where he is biting.
It is recommended to take bells with different keys and sounds. This eliminates the possibility of confusion with gear. With the help of this simple set, donk for bream is made easily and simply with your own hands.
Make gear
The fishing line of the required length is wound on the reel of the rod. We must not forget about the "alarm" at the same time. To do this, a bell or a bell is installed in one of the sections, which must also be fixed to the fishing line. Then a weight is put on its end. Moreover, so that the loop on it excluded its possible movement along the length, but at the same time the fisherman himself could change his position if necessary. A hook is firmly attached to the end of the line .
Place selection
This fish prefers to be at the bottom. Pit is a favorite place to live in bream. It is here that he spends most of his existence. Therefore, before fishing, it is better to study the structure of the bottom. Professionals use an echo sounder for these purposes. But it is not always possible to buy such an expensive device. If you plan fishing from the shore, then phasing the weight with a float, you can determine the nature of the bottom and find those places where the fish should hide. This is an important component of the fact that fishing for bream on the donka will be successful.
Fishing technology
Before fishing, you need to throw the bait. For these purposes, boiled peas or corn are perfect. It is recommended to wait a five-minute pause so that as many fish as possible accumulate. It is best to catch bream in the rain
worms. They are put on the hook so that its tip (it is also called the "sting") protrudes from the outside. This will qualitatively catch the catch. Throw gear. In this case, the line should be slightly stretched. After that we put the rod on the locks. Then you can abandon the second fishing rod. At the same time, the distance between them should exclude the possible interweaving of gear. When the donka on the bream, made with its own hands, rang, it needs to be taken out of the water, after which you will see your catch. Then, depending on the state of the bait on the hook, you can either replace it (if the worm already looks very bad) or throw it right away (if everything is fine with it).
As a result
Various fishing equipment for bream are now used. But the best remedy among them is donka. She works perfectly at the bottom, where she likes to inhabit this fish.