Zakidushka is a homemade fishing tackle. It is very convenient, as it is thrown at a significant distance from the coast. It is mainly used for catching fish that lives on the river bottom. How to make a throw, we will tell in this article.
Such fishing tackle is convenient in that it covers a large water area, and its manufacture does not require significant cash costs. The zakidushka consists of a fishing rod, to which the reel is attached, the main fishing line (sometimes a nylon cord is used), a sinker, several leashes with hooks and a bite signaling device. For the latter, you can use anything you want, from a regular clothespin to a bell.
How to make a wrapper? Component parts and manufacturing
A hard whip or a strong narrow plank is suitable for the fishing rod. A ring for skipping fishing line is fixed at the end, and below (by 25-30 cm) a reel or a small reel. The length of the fishing line should be at least 30-50 m, diameter from 0.3 mm or more. For catching medium-sized fish, leads of 0.18-0.25 mm are suitable, for large individuals it is advisable to take from 0.3 mm. Their length is 15-30 cm. Hooks are selected in accordance with the bait used. The weight of the sinker is usually from 50 to 200 g. A 2-3 leash is enough to equip the zakidushka, each of them has 1 or 2 hooks.
How to make a zakidushka with a good signaling device?
You can use the bell, which is attached to a piece of rubber, with a hole made for fishing line. After casting a thrower, the rod is stuck in the ground in a vertical position. The fishing line is slightly pulled up by the fisherman and hangs relaxed at the base of the rod. After biting the fish, it stretches, and the attached bell starts to ring. You can use a regular clothespin. After casting the hooks and installing the fishing rod, the fishing line is pulled up, after which a clothespin is hung on it. As the fish bite, the signaling device will jump up. The bell is more convenient in that you can not follow the gear, focusing on its sound, in the second case you need visual attention.
Fishing technique
Now, how to make a throw, the reader understands. We proceed directly to fishing. The casting is cast as follows: the fishing line is laid at the feet with rings, the end with a sinker is picked up (just above the leashes) and, after swinging, it is thrown into the river. You can spin over your head to throw away.
The bait should fly away at a distance of 30 m from the coast and more. After the load is at the bottom, the line is pulled a little. If it is not attached to the reel and fishing rod, then its end should be fixed on the shore so that the fish does not pull into the water. After biting, the fish is hooked, hands holding the fishing line.
Some features
We explained how to make a prank. Now a little about gear designed for carp or carp personally. It is slightly different in design from that described above. How to make a crucian stuff? The main difference is the additionally attached feeder. She is attached to a load sliding on a fishing line and plays the role of bait.
When training for fishing, it will not hurt to have 2 or 3 hooks among your gear. They do not require much time in setting up, do not interfere with fishing with rods at the same time and will certainly increase the catch.