The Chinese company HDX manufactures boat motors of varying power . The full range of currently manufactured goods will be considered in the material. The tiller models are used most often of the movable type. Directly starters are installed with a protective box. If you believe consumers, then in the devices there are no problems with stabilization. It is also important to note that the models have high-quality protection systems.
Almost all versions have tilt locks. Thus, there are no problems with connectors. If necessary, you can always clean the fuel system yourself. The top cover of the motors is easy to remove and closes very tightly.
Consumer reviews for the HDX T26 model
These HDX outboard motors deserve good reviews. The tilt locks are installed in this case. There is also a quality spring for this model. Her connector rarely overheats. The manufacturer has a very durable running gear, and it can withstand more load.
If necessary, you can remove and clean the pump at the motor yourself. Fuel consumption is low. This motor is mounted without any problems, however, it should be borne in mind that it weighs as much as 14.2 kg. The user can purchase this model at a price of 15 500 rubles.
What is interesting about the HDX T2 engine?
This motor is appreciated by many consumers for compactness. Deadwood is set to low. A sturdy clamp is used. According to the owners, it is able to withstand heavy loads. The fuel system is quite simple to clean. The thrust of the block in this case is located above the deadwood.
If we talk about the modification parameters, then the maximum power of the model is 5.5 kW. Its maximum speed allows the motor to quickly gain a boat. The piston diameter in this case is exactly 33 mm. The pump is installed next to the stem of this configuration. You can remove it from the pallet yourself. The model is controlled easily and starts, according to consumers, the first time. You can buy a boat engine HDX 2 on the market at a price of 14 thousand rubles.
What is being said about the HDX T30?
The presented HDX boat engines reviews from the owners get good primarily for the convenient tiller. This model is very comfortable to drive. Also, the owners are pleased that the clamp height can be adjusted. The two-stroke engine is gaining momentum quite quickly. The fuel system is rarely contaminated. It is also important to note that the pump often does not have to be changed.
However, the motor still has disadvantages. According to the owners, the starter system sometimes does not work. Also, consumers periodically go out and build an impeller. This happens most often due to improper operation of the coupling. The user is able to purchase this motor at a price of 15 thousand rubles.
Features modification HDX T36
HDX boat engines of this modification, among other models, stand out with a high clamp. The tiller in this case is of a fixed type. Directly using a mechanical starter. Deadwood in the device withstands heavy loads and rarely fails. If necessary, the drive shaft can be removed independently. The water pump at the motor is provided reliable. According to consumers, it is extremely rarely contaminated. The propeller is set quite large, but you can swim in shallow water. These boat motors HDX cost (market prices) 12 000–13 400 rub.
HDX T35 model parameters
HDX boat engines of this model are equipped with a fixed tiller. The clamp in this case is provided with a pallet. The direct spring of this model uses high-quality. However, the pump, according to the owners, is very quickly contaminated. It is also necessary to periodically change the impeller. Complaints from consumers were not received on the reclining lock. This model is also greatly praised for its compact size and low weight. You can buy it in the store at a price of 12,700 rubles.
What is interesting about the HDX T4?
From the manufacturer HDX, outboard motors are equipped with a high-quality gearbox. The power of this modification is exactly 5 kW. The tilt lock for the model is used standard. If you believe consumers, it’s easy to configure. The tiller of the motor is provided with a movable type. Deadwood in this case is installed near the drive shaft. The impeller, according to the owners, rarely breaks and is very durable. The flywheel of the model is located immediately behind the clamp, it is protected by a casing. If necessary, the connector can be removed independently.
The model’s water pump is of high quality, and complaints about it are rarely received. By cons include a low quality starter. The pinion gear is periodically clogged. It is also important to note that the fuel system must be constantly monitored. You can buy this motor in the store at a price of 13 500 rubles.
New instance of the HDX T58
From the manufacturer HDX, outboard motors of this model are equipped with two large water pumps. The impeller is very durable. The tiller in this case is of a movable type. Under the spring at the motor is a clamp. The cooling system in this case is available. It is also important to note that there are special pushers on the deadwood. Due to them, the flywheel practically does not wear out. Of the minuses of this model, the dense layout of the modules should be noted. Independently remove the pinion gear is quite difficult. The shaft in this case is attached firmly. There is an opportunity to buy a model at a price of 15 500 rubles.
Modification HDX T5
The HDX 5 outboard motor boasts compactness and light weight. The pallet in this case is not wide, and the deadwood is set low. However, the propeller is a standard size. The power of this modification reaches 5.6 kW. If you believe the owners, then a very large consumption of gasoline. The fuel tank in this case is 1.4 liters. There is a tilt lock above the pallet. It should be noted separately that in this configuration one pusher is installed. A drive shaft is mounted above the spring.
If necessary, you can remove the flywheel yourself for cleaning. Comfortably controlled by this model. However, it is not suitable for shallow water. The protection system she uses is standard. In this case, there is no way to adjust the clamp. Directly the propeller shaft is installed of small diameter. You can buy a motor in a store at a price of 14 thousand rubles.