Each city apartment must have a water meter installed. At the same time, it is important not only to install such a device, but also to register it with the appropriate service. In order for the water meter to be put into operation, a special conclusion is required, which indicates that the installation of the water meter was carried out correctly, as well as an act, which describes the result of checking the device for leaks and for the presence of a seal. The last document is very important. The specialist of the relevant company should install a seal on the counter. This restricts access to the parts of the device and does not allow changing the readings. In addition, the seal is the basis for recalculating the volume of water supply. Can I install it myself? How to seal a water meter?
Why install a seal
Before answering the question of how to seal the meter on water, you should understand why this is necessary at all. According to the law, metering devices can only be used whose accuracy has been officially confirmed. To do this, seals are installed on the counters. Its integrity confirms:
- Lack of extraneous access.
- The accuracy of the readings of the device, since no one tried to direct water bypassing the meter.
When do I need to seal the device?
In what situations do water meters need to be sealed? Chelyabinsk, Moscow and other cities of the country cannot do without special services that perform sealing of metering devices. A similar procedure may be required when installing a new device. Of course, many ask the question of how to seal the meter on the water yourself. Is it worth it? Experts do not recommend conducting such a procedure on their own. Indeed, to register a new device, it is necessary to submit documents from an organization that has the right to carry out such work. So, re-sealing the water meter is required if:
- The life of the device has ended.
- The counter prematurely failed.
- System components such as valves or pipes were replaced.
- The ball valve is out of order.
- The counter has been damaged.
- An accident has occurred in the water supply system.
- The apartment was purchased in the secondary housing market.
It is necessary to seal the meter in almost any situation when it is damaged as a result of mechanical stress or has been replaced.
Who should seal the water meters?
In order to recalculate the payment for water, it is necessary not only to install the meter, but also to seal it and then register it. If this is not done, then the amount of charges will correspond to the tariff. Since it is impossible to seal water meters on their own, it is necessary to invite a specialist from the organization who has permission to carry out such work. Otherwise, it will not be possible to register the water meter. The most important thing is that the company issues an act of sealing.
Before starting work, the specialist must check whether the counter is installed correctly and whether it is intact. After sealing, the employee must hand the apartment owner the package of documents that is required to register the water meter.
The company should be chosen with particular attention. Only those organizations that have the appropriate license can seal water meters. Most often, such companies work together with the Criminal Code, Housing and Utilities Administration, Homeowners Association and so on. Indeed, according to the Federal Law "On Water Supply and Sanitation" dated December 12, 2011 No. 416-, sealing of meters must be carried out free of charge by an organization that provides water supply to apartments.
However, in some cases a fee is required. This applies to cases when a damaged seal was replaced with a new one.
Which company to choose?
Since only a specialist can seal a water meter, it is worthwhile to carefully choose the company. How to choose the right wizard? When choosing, you should pay attention to the presence of such documents as:
- License to carry out work of a similar plan. This guarantees the professionalism of the employee.
- Warranty and service, replacement and repair of metering devices in case of breakage.
In addition, the company’s specialist must present to the owner of the apartment a package of necessary documents: the installation certificate, the contract for the installation of the water meter. It is worth considering that the responsibility and the correct installation of metering devices lies with the company that carried out such work. Moreover, all work must be carried out in accordance with all the requirements of the regulatory body.
Sealing the meter during the first installation or replacement
Many are interested in the question of how to change the meter for water and seal it? If the meter was only installed, the owner of the apartment must call the employee of the management company. The specialist of this organization must confirm that the installation of the water meter was made without any violations. In this case, an act of putting the meter into operation should be drawn up. After that, the meter is sealed.
It is worth considering that in some cities it is only allowed to carry out such work by public utilities. In such situations, the sealing of the water meter will be carried out by two employees: a representative of the municipal service and the Criminal Code. Exactly the same actions occur when replacing a water meter.
Terms of the procedure
How much will it cost to seal water meters in Orenburg, Chelyabinsk and other cities? It all depends on who can do the job. The term for filling the metering device, as a rule, is indicated in the technical passport of the meter. Most often, this indicator depends on the model of the water meter. It is worth noting that less time is given for sealing those devices that were released a long time ago than for new devices. Typically, representatives of the organization come within 5 days. In this case, the owner must have not only those passports, but also the act of installation.
In this case, the specialist is only interested in whether the device was installed correctly, and whether its integrity was violated. After the inspection, the employee must draw up an act of commissioning the water meter, and then seal the assembly. The owner of the apartment must carefully study the contract. Often, it indicates a fairly high monthly fee, verification fee, as well as insurance. After signing all the papers, the calculation of all expenses on the counter begins.
The contract must be executed in several copies. One of them remains with the owner of the apartment. The registration certificate of the water meter must also remain with the owner of the living space. An organization employee can only copy it. Copies of documents can be made in advance.
Sealing cost
Call the water meters can be sealed by a local service wizard or you can turn to private organizations for help. In accordance with the law, this procedure should be carried out free of charge during the initial installation of the water meter, after repair or inspection. The fee is charged only in those cases when the water meter was damaged and out of order due to the fault of the user himself.
Moreover, each company has its own pricing for such services. As a rule, the price is from 500 to 2000 rubles. It is worth noting that there is a practice of appealing against such payments through a court. Many seek to return their funds spent on sealing the meter. To do this, you must contact the court at the place of residence. Complain about how companies serve can be in Rospotrebnadzor.
How to register a counter?
When buying a meter for water metering, special attention should be paid not only to its configuration, but also to the availability of a technical passport. This document should not be a photocopy, but a print. In the technical passport, as a rule, the serial number of the device is indicated, which must coincide with what is indicated on the water meter itself.
After installing the counter, you must register it. This requires:
- Submit an application to the appropriate service.
- Indicate the contact details, as well as the name of the owner of the apartment.
- Make a photocopy of the technical passport of the water meter.
- Indicate the desired timing of filling the water meter.
It should be noted that in cases where a company representative is not able to establish a seal at the appointed time, he must contact the owner of the apartment and set a new date. Moreover, all work must be carried out within 15 days after the application was submitted.
In conclusion
Now you know whether it is possible to seal the meter on the water yourself. It is worth noting that you can mount the water meter yourself. However, after this, it is still necessary to invite a specialist of the corresponding service to draw up an act and conclusions on the correctness of the installation of the water meter. It is not recommended to fill the water meter yourself. This should be done by an employee of a company licensed to provide such services.