Aluminum composite panels, the price of which will be written below, are mainly used when decorating buildings, houses and structures from the outside, using special technology of a ventilated facade. Such material can also act as an element of a washable and wear-resistant finish for various public places, for example, medical institutions, airports, restaurants and cafes, railway stations, bus stations. And thanks to their simple installation, they are often used for the construction of advertising structures.
Manufacture
Composite panels are made by bending aluminum sheets, and the radius of curvature should be as minimal as possible. The latter, subject to all necessary regulatory standards, is exactly the same as the thickness of the plate. At right angles to the main surface, special installation bends are bent along the entire perimeter of the panel. These bends are then placed in a special installation profile, which is attached to the surface of the wall and clicks very firmly.
Classification of mounting profiles
All modern installation profiles are divided today into 3 main varieties:
- joint with seal;
- open docking of panels;
- using a moisture shield.
In order for the facade to gain increased stiffness, additional elements are often used. For example, in the role of props, you can use a wooden beam or flat panels.
Benefits
The main advantages of surface finishing from aluminum composite panels are a large gamut of various colors and a long service life of the front side of the material with the paintwork applied. Another positive quality of such products is the ease of various processes of their processing, in particular, milling. It is it that allows you to create technical holes on the surface of products. The density of the aluminum panel is approximately 6 kilograms per square meter.
disadvantages
It should be noted that this material does not belong to heat-insulating materials, since it is made for the most efficient heat transfer. It allows you to equalize the temperature of the inner and outer aluminum sheets, otherwise, when this material is heated under the influence of the sun, serious deformation can occur.
In order to avoid the so-called cold bridges, the installation of aluminum composite panels must be done so that special paronite thermal-breaking gaskets are laid between the surface of the bearing wall and the brackets of the mounting guide elements.
Scope of application
Most often, these products are used to create the exterior of certain buildings. The most popular ventilated facades. However, not only this is the scope of this material. Composite aluminum panels are also used in interior decoration, for example, in public institutions. As a rule, such are schools, train stations, theaters, salons, shops, centers. That is, these are premises where a large flow of people constantly passes. Indeed, it is in such buildings that you should install resistant materials that are not afraid of mechanical damage. They will not only be a powerful support, but will also become a good decorative finish.
Also very often aluminum composite panels are used in places of temporary exhibitions or on billboards. They are ideal for restoration of old houses, especially those whose walls cannot be restored. Thanks to these panels, complete soundproofing will appear, and the appearance will be many times more attractive.
Installation Errors
In order for the panels to serve for a long time and quickly do not deform, certain rules should be observed during installation. When the sheets are delivered, they need to be inspected for scratches or defects.
So that during storage aluminum composite panels are not damaged, it is necessary to install cardboard or any other material of a similar texture between them. Ideally, if the sheets are planned to be transported using a crane, it is best to use special clamps that will give a high guarantee of safety to the product.
During installation, the main thing is to remember some of the properties of the panels. For example, with increasing temperature, their dimensions slightly increase. This suggests that during installation it is necessary to leave very small gaps between them. Backlash is welcome.
Remove the protective film also without errors. Aluminum composite panels, the price of which starts from 1 thousand rubles per 1 sq. Km. m, it is easy to distort as a result of incorrect movements. It must be removed at an angle of 180 about . And only after 2 weeks, and better even after a month from the moment of their production. In this case, the glue will be completely removed, and will not remain on the surface.
Goldstar
Aluminum composite panels, manufacturers of which sometimes use the wrong technology and do not apply a protective layer, it is better to buy the Goldstar brand. Maybe some are scared that they are made in China, but in fact, if you buy authentic models, then the quality is really amazing. According to people, it is they that are best suited to long-term operation and withstand mechanical stress. Branches of this company can be found in various countries, including America, Europe and Asia. It should be noted that the prices of Goldstar aluminum composite panels are not so high and do not differ much from the prices of competitors. What confirms the quality of these materials? And the fact that in New York some skyscrapers were built using this particular product. This indicates the invaluable quality of the panels and the honesty of the manufacturer, which is now so much appreciated in the world market.
Manufacturers
Alcan Kapa GmbH is a German company, which began its activity in the 60s. Her products belong to the category of quality products, which are in great demand. However, one must be prepared for the fact that there are many fakes on the market that give out as a German product.
Alyufas is a Ukrainian brand specializing in the production of composite panels. The plant is located in the city of Dnepropetrovsk, equipped with high quality equipment. During the manufacture of panels used the latest technology. That is why there are no analogues to this brand in Ukraine.
Other manufacturers are also on the market, such as Reynobond, Etalbond (Europe), Alpolic (Japan), etc.
Total
Based on all the information, it can be said that aluminum composite panels are an excellent material, which today is a leader in the construction industry. It is great for decorating any buildings, because its excellent appearance and good characteristics are not detachable advantages. Thanks to this material, you can make your existence more colorful and comfortable. Moreover, the panels do not require maximum care.