The Taiga inflatable boat is an economical, light and reliable watercraft, which is produced by the Leader company from St. Petersburg. The product has a good layout, safety and affordable price. The vessel is not inferior in gliding and seaworthiness parameters to many similar modifications. As a rule, small power units with a capacity of up to ten horsepower are used for movement. The device is made of PVC materials and can be operated without registration in the department of gims.
general information
The Taiga boat is equipped with a hull, the base of which is made of an inflatable PVC balloon, the density of the material is 750 grams per square meter. The skeleton itself is constructed from trapezoidal parts, which made it possible to reduce the cost of the vessel and save on components. Joints and joints are fixed by welding and glued with a polymer tape. The diameter of the cylinder has 380 millimeters.
The inside of the boat is divided into three independent sectors. The ship in question is available in several versions, which differ in configuration. All models are designed for movement on water using oars or an outboard motor. The vessels are equipped with a flat tension bottom and a hard-type deck made of 9-millimeter lamellas. Payol is an H-shaped aluminum profile.
Boat "Taiga-320": characteristics
Structurally, the watercraft is made according to the standard scheme: an inflatable PVC balloon, wooden deck elements made of plywood treated with a waterproof coating, paddles and guides made of light and durable aluminum alloy.
Main characteristics of the Taiga-320 PVC boat:
- width / length (m) - 1.42 / 3.2;
- cylinder diameter (mm) - 380;
- load indicator (kg) - 380;
- capacity - three people;
- recommended power for outboard power plant (hp) - 5-10;
- product weight (full) - 36 kg.
It can be noted a good complete set of watercraft. It includes:
- inflatable boat;
- four slans;
- two longitudinal and a pair of transverse rails;
- pump-action pump with sleeve, oars;
- a pair of seats, two packing bags.
In addition, each kit is equipped with a repair kit, first-aid kit and operating instructions.
The boat "Taiga-270"
The domestic motor-rowing modification with a stationary transom is a universal vessel for calm ponds. The package includes a pair of hard seats, folding oars, a hand rope, which provides additional security for passengers. The stern and bow of the boat are equipped with handles for transportation, a stationary transom made of waterproof plywood, rigidly fixed on cylinders. The sections are connected using an aluminum profile, the flooring is made of Finnish waterproof plywood. Also included is a passport, repair kit, pump and packing bag.
Dimensions and characteristics of the Taiga-270 PVC boat:
- length / width (m) - 2.7 / 1.25;
- product weight (kg) - 28;
- limit indicator of loading capacity (kg) - 220;
- capacity - two people;
- outboard maximum power - five horsepower;
- dimensions in packed form (mm) - 1005/500/350.
The material of the vessel is resistant to decay, corrosion, salt water, can be used at temperatures from -40 to +60 degrees.
Assembly and disassembly
The boat "Taiga" in preparation for work is going in the sequence specified in the instructions. The durability of the product depends on the correctness of this process. Manipulation is performed on a flat clean area. The plans and stringers must be mounted in accordance with the tags on them.
Air is pumped by a standard pump or a model approved by the manufacturer. It is necessary to exclude the use of compressors, as this can lead to excessive inflation and deformation of the seams. The process should be distributed evenly across each compartment.
It is necessary to timely clean the air valves that are responsible for tightness and are equipped with special springs. The Taiga inflatable boat must be clean and dry before disassembling. It is not recommended to pack the product in a wet form, as this is fraught with deformation of the kit.
Operational nuances
Visiting a reservoir, especially unfamiliar, it is advisable to get acquainted with its features and swimming conditions. First of all, after assembling a PVC boat, it is necessary to inspect it for damage. A small repair can be done using a standard kit.
It is better to postpone travel on a ship with a large wave or strong wind. The load is placed evenly over the cockpit compartments. If the trip is planned alone, the nose will be the best place for it. Do not exceed the manufacturer's recommended passenger capacity and load capacity.
If the movement is carried out with the help of oars, the rower must guide them smoothly and evenly, checking the reliability of fixation in oarlocks. The boat "Taiga" is not intended for use by a motor with a capacity of over 20 liters. with. Ignoring this point can lead to loss of control, especially when passing through bottlenecks, reefs and sandbanks. With a sharp change in temperature, it is advisable to check the pressure in the cylinders and bleed or pump air, if necessary.
Reviews
Most users note that the Taiga-320 inflatable boat has a high quality workmanship with even, non-behaved seams, reliable fixation and practical components. Excellent performance gives the boat in rowing mode and on the motor. The necessary rigidity is provided by strong cans and slans. The assembly of the boat takes no more than 15 minutes.
Some owners note the inconvenience of packing the boat in two bags, as well as the lack of additional hull protection, which requires special care in places where sharp stones or plants with thorns are possible. Another minor disadvantage can be attributed to the fact that when in cold water after 15-20 minutes, the stringers must be further upset, after which the floor becomes smooth and hard. In general, the product in question is a universal, practical and inexpensive boat that meets modern parameters.