The key to safe manicure is sterile tools. Today, two types of sterilization devices are used - glasperlen and ultraviolet. Glasperlenic sterilizer is most often used for gentle and quick processing of a large number of tools of small sizes. Since this equipment has appeared on the market recently, the cost of large models is very tangible, so only elite beauty salons can afford them so far. But compact sterilizers are quite affordable and have already earned popularity among ordinary nail masters.
Glasperlenny sterilizer for manicure tools: advantages
Devices for sterilizing manicure tools quickly conquered the market, and this is no coincidence, because before they appeared all the devices used for processing and nail extensions, the masters had to soak or boil for a long time in disinfectants. This
sterilization method negatively affected the instrument, causing corrosion, edge blunting and deformation. And the obsolete types of thermostilizers were quite bulky and consumed an impressive amount of electricity.
Glasperlen sterilizer has a very compact size - the largest model is no larger than a conventional microwave oven. In addition, high-quality disinfection of scissors, tweezers, cutters, needles and other tools can be carried out literally in a matter of seconds.
Glasperlin sterilizer device
The size and design of the devices may vary, but any glasperlenny ball sterilizer works according to the same principle, since disinfection flasks have the same structure.
Heat-resistant metal is used to make the flask, and the body is made of plastic. The flask is filled with small balls of
quartz glass, which is characterized by a rather high melting point. This property of quartz allowed it to be used to fill the sterilizer.
Powerful heating elements surround the metal flask, which, when turned on, heat it up very much. Together with the flask, quartz balls are heated up to a temperature above 240 º. In such conditions, all bacteria, fungi, complex viruses and other microorganisms quickly die.
Sterilization process
Using a glasperlen sterilizer, it is not necessary to carry out any preparatory work before sterilizing the instrument. Just turn on the device and wait about half an hour until the balls warm up to maximum temperature. After that, a disinfection tool is immersed in a flask with quartz. The maximum processing time is 30-40 seconds. Please note that the glasperlin sterilizer can only be used to clean metal manicure tools, because plastic or other high temperature materials will not withstand.
Additional requirements
Despite the ease of use of the device, some requirements must be observed to improve the quality of sterilization. The power of a small device is 75 watts. The heating of the balls in it is 30 minutes, however, over time, the thermal conductivity of the balls decreases, because of which they can no longer warm up to 240 º. In this regard, it is recommended to completely change the quartz filling annually.
Before the sterilization process, the instruments must be thoroughly cleaned, then washed in a disinfectant solution. To avoid damage to manicure items, place them in the sterilizer should be dry. Thermal disinfection is recommended immediately before using tools.
Glasperlenny sterilizers are a reliable protection against infection with all kinds of dangerous diseases, as well as a guarantee of high-quality work of the master.