Most people who start to draw on paper prefer simple graphic sketches, which you can then point and paint with paints or pencils. Gradually, the complexity of the image is growing. This effect is achieved by increasing the load in stages. This is exactly what we will do in this article. We will tell you how to draw a warship.
How to draw a simple country-style ship
Drawing a ship is not as easy as it might seem at first glance. Therefore, it’s worth starting with the most simple sketch. To do this, we chose an old model of a floating craft similar to a pirate ship. To draw it, take a blank album sheet, a simple pencil and an eraser.
Next, conditionally divide your sheet in half and in the bottom half draw a strip perpendicular to the middle, measuring approximately 1.5-2 cm. Place a pencil on top of this line and draw another small line (1 cm) to the right from it.
Then, before drawing a warship, place a pencil in the lower part of the first straight line and draw a line with a slight rounding up. Draw a similar curve from above (both lines will be parallel to each other). After that, combine both features, you get an unusual figure.
We draw the second part of the ship
In the next step, draw a similar shape, but smaller, next to the previous one. This will be a peculiar layout of our ship with a line of demarcation of figures and a small V-neck at the junction line. At a more detailed examination, you will see a ready-made outline of the stern with the bow and the lower part of the future vessel.
Our next step is to draw an additional curve at the bottom of the large figure. This must be done not only before phasing out a warship, but also in order to end the stern line (to make it smoother and more curved).
Draw the bow and masts on the ship
Now we see what kind of ship we have. To make it more realistic, we recommend drawing an inclined line (a spire on the nose) and three cruciform squiggles (these will be the outline of the masts) in its bow.
Creating a ship from scratch: how to draw sails easily
We return to the bow of the ship and its spire. We take a pencil and draw a sail from below, resembling a small elongated rectangle. After that, we go to the first mast, we retreat from its top about 0.5-1 cm. First we draw one and then another strip, which will be parallel to each other. Between them, draw the front and back along a small curved half-arc and repeat all this from below, as well as on the adjacent mast. The result should be two masts with four sails. On the third mast, located at the rear of the ship, we draw a triangular sail instead of a rectangular one.
We draw guns and small details on the ship
Recall that earlier the old military or pirate ships were made of wood. In order to add realism to our vessel, we draw horizontal stripes around the entire perimeter of the stern. But do not forget to leave room for windows and guns. What is needed for this? Around the center of the ship, draw five round windows from which neat guns will stick out, ready for the most serious battle and set up exclusively for victory.
Further, before drawing a warship in its entirety, it remains to add a few touches. These will be the tops of the masts, where, as a rule, lookout observation towers and frigate flags are located.
It is also worth separating the outside of the vessel from the inside. To do this, make a small side in front and add several ship compartments at once. Our water transport is ready. It remains only to paint it in colors suitable for old wooden frigates.
How easy is it to draw an aircraft carrier with pencils?
If you are wondering how to draw a warship like an aircraft carrier, we’ll show you how to do it. So, at the first stage, we again distinguish between the top and bottom of the album sheet, and also outline its middle.
Next, draw an obtuse angle in the lower plane (the right hand will help to indicate its direction, if you turn it away with your palm, bend three fingers into a fist, and spread your index and thumb apart). From the end points on the lines of the corner, depict another, but larger in format, obtuse angle. It should be something like a slightly elongated rhombus.
We draw the main details of the ship
The next step in our instruction "How to draw a ship" (for beginners) will be the drawing of the main parts of the ship. To do this, set the pencil in the middle and conditionally divide our "rhombus" into two triangles. In one of them, having a smaller size, draw another obtuse angle and draw two lines up from it, and then connect them with a rounded hill. This will result in a mast on which instead of sails radar equipment is installed.
Let's go back to the original dull corner. Take a small line away from him, another down from it, and then another down and to the side. Total four lines of different lengths that form the stern of the ship. Next, on the left side of the large rhombus, draw a small side.
We finish the stern and deck of the aircraft carrier
The next step will be to draw the deck of the aircraft carrier and “stuff” it with antennas of various shapes and sizes. To do this, it is best to take the original photo of the ship and try to display its deck on paper. Next, draw a perpendicular line in our rhombus and thereby divide the stern of the vessel into two halves.
In one and the other part of it draw the sides, windows and, of course, take-off and landing markings. And at the last stage, decorate the ship and the sea or ocean, which he plows in search of military exploits and adventures.
Summary - choosing between two options, you can learn in more detail how to draw a warship with a pencil.