In the garage, an avid car enthusiast spends, if not all his life, then a significant part of it. And it happens there, not only on fine summer days, but also in winter, when it becomes simply impossible to perform any kind of difficult work with your fingers numbed from the cold. How to solve the heating problem? A good way to protect from the cold can be installed in the garage potbelly stove.
Things to remember
You must be aware of some nuances, non-compliance with which can lead to sad consequences. Safety comes first! Furnaces of this type are strictly forbidden to be left unattended. Moreover, such negligence in a garage that is filled with various flammable liquids is unacceptable.
Installation Features
So where does the potbelly stove live? It can only be put in the garage if you have equipped a special place. The furnace must be placed away from the machine itself, from containers with fuels and lubricants and used oils, and also not be placed near the exit. Why? Yes, because otherwise, when ignited, you will have to pose as a brave fighter with fire, trying to break through the raging wall of flame. Believe me, all this can end very, very badly.
Site preparation
First you need to finish some kind of non-combustible material on the wall and the opening through which the chimney for the stove in the garage will exit. Previously, asbestos was used for this purpose, but basalt wool, covered with tin , is quite suitable ., . . . . 35 , .
, ? , .
It all depends on your preference. So, if you need quick heat, we recommend buying a steel stove. It is easy to melt it, and the metal heated to red will quickly make the stay in the garage more enjoyable. If you want to provide long heat, then it is better that the potbelly stove in the garage is made of cast iron.
It is somewhat more difficult to uncover, and it consumes more fuel. But the heated cast iron gives a stable and powerful heat, which will maintain the optimum temperature in the room. This is especially important in extremely cold winters, which are not uncommon in our country.Welding
Before you ask yourself how to weld a stove in a garage, you need to get hold of decent metal. Saving on this is categorically not recommended: bad steel will quickly bend under the influence of temperature deformations, threatening to spill out sparks or coals through the diverged seams. You need to be especially careful when boiling the seams in the chimney. The slightest error - and trouble can not be avoided!